Share this project

Done

Share this project

Done
Custom Interlocking Stackable Storage Solution to Master Your Destiny Game Collection. Thermoformed Trays Hold Cards, Dice, and Tokens.
Custom Interlocking Stackable Storage Solution to Master Your Destiny Game Collection. Thermoformed Trays Hold Cards, Dice, and Tokens.
Custom Interlocking Stackable Storage Solution to Master Your Destiny Game Collection. Thermoformed Trays Hold Cards, Dice, and Tokens.
Created by
334 backers pledged $13,458 to help bring this project to life.

About this project

Zen Bins Destiny Custom Storage project video thumbnail
Replay with sound
Play with
sound

Zen Bins Destiny Custom Storage

$13,458

334

Our long awaited second Kickstarter is finally here.  Thank you all to the success of our first project and no one was more excited than us to hear about the new AND MUCH LARGER (21 mm) collectible dice game called Destiny. 

We hope you enjoy this thermoformed custom game storage solution for its compact size, strength/durability, and enhanced game play as much as we do.  We welcome feedback and suggestions to help make this the best possible solution we can provide for you.

What You Will Get Including Any UNLOCKED Stretch Goals:  

  • FORCE PLEDGE: 1 Base (Holds 18 dice, approx. 70 unsleeved/35 sleeved cards, 2 sets of tokens) & 2 Trays (36 dice, 200 unsleeved/100 sleeved cards), 1 Lid, & 1 Blinder. (With the 10K stretch goal added, now 72 Total Dice Capacity)
 
  • FORCE MASTER PLEDGE: 1 Base (Holds 18 dice, approx. 70 unsleeved/35 sleeved cards, 2 sets of tokens) & 8 Trays (144 total dice, 800 total unsleeved or 400 sleeved cards), 1 Lid, & 1 Blinder. (With the 10K stretch goal added, now 180 Total Dice Capacity)

 

 
  • ALL DICE PLEDGE: 5 All Dice Trays (Each Holds 42 dice) (168 total dice) (With the 10K stretch goal added, now 210 Total Dice Capacity)

 

   

Base - The bottom tray of your stack which holds 2 sets of standard tokens (Resource, Shield, 1x, and 3x damage) with curved bottoms to easily remove them during play.  It holds approximately 35 sleeved/70 unsleeved cards (enough for your 30 card deck, 1 battlefield card, up to 4 character cards).  Designed to sit next to your game play area and lets you quickly identify your dice to field them into play.  The under side of the base tray has indentations to hold the rule book.   

 

Standard Tray - Each standard tray has a capacity of 18 (21mm) dice. There are 2 card storage areas which hold approx. 100 unsleeved/50 sleeved total cards (50/25 each side).  Rotate each tray 180 degrees to lock into each other. Note: There must be another tray or lid above it to hold this amount.  

  

 ALL DICE Tray - Each All Dice tray has a capacity of 42 total (21mm) dice. The center area holds 18 dice and the 2 side areas each hold 12 dice. On the sides, the dice lay near horizontal with each row stair stepped at a light angle to hold in place.  A 45 degree angle on one side allows for easy removal by sliding them out.  These trays also have a single mold design, so just rotate each tray 180 degrees to lock into each other. These are compatible with all the other components.  Note: There must be another tray or lid above it to hold this amount.

 View Full Update

 

Lid - Used to cap off the top of your stack with a nice finished look and has indentations on the underneath to hold a "Blinder".  

 

Blinder - Snaps in place under your lid and can be removed and placed onto your base tray dice.  Simply push down on the back side to quickly view your available dice.  Use in tournaments or just to keep your opponent from getting the upper hand by seeing what you have left to play.  The Blinder will also fit under a standard tray if you want to show off your dice.   

 

ENHANCED GAME PLAY...Play tokens, dice, and cards directly from your Bins. Rounded bottoms allow for easy removal of tokens while card areas have a slight drop down to pivot the cards up. Your available dice are always visible and easy to remove.  

TOURNAMENT READY...Transport your team in a compact system that allows you to hide your dice from your opponent.  It gives you access to all your tokens and you can even play your cards/discard directly to the tray.  A single Base/Blinder/Lid combo will accommodate most teams (35 cards/2 sets of tokens/18 dice). If you want to bring more teams, just add standard trays. 

STACKABLE...Interlocking plastic storage trays. Start with a base tray and with each standard tray you stack, it adds 18 (21mm) dice and approximately 100 total unsleeved/50 sleeved cards. With the transparent casing, you can quickly see what’s inside.  Finish off the stack with a lid for a finished look.

COMPACT...Standard Tray Dimensions: 5" wide x 12" long x 3/4" height 

PORTABLE...Securely fit large quantities of dice and cards together in your backpack or travel container. 
    
SUPER LOCKING...High strength durable plastic that firmly “Snaps” together but releases easily from the ends. 

MADE IN USA. Produced and shipped from St. Louis, MO.  We can start shipping product out in around 2 months or less after the Kickstarter is complete and funded.

 This is 3rd party custom storage solution. 

As we achieve certain funding milestones during the Kickstarter, we are able to unlock more items we can provide to your base pledge. These are incentives to spread the word about the campaign and help us to make larger initial production runs.   

FORCE PLEDGE:

Now gets 1 Additional Free Standard Bin (per pledge), increasing capacity to 72 Total Dice

FORCE MASTER PLEDGE: 

Now gets 1 Additional Free Standard Bin (per pledge), increasing capacity to 180 Total Dice.

ALL DICE PLEDGES

Now gets 1 Free Lid (per pledge), Increasing capacity to 210 Total Dice.

 

 ALL PLEDGE LEVELS

For each Force or Force Master Pledge, you will receive 1 Free Standard Bin or 1 Free All Dice Bin for each All Dice Pledge

  

You can change/add the amounts below to your pledge total dollar amount at any time during the campaign.  We will send a survey out after the campaign ends to verify what you want.  (ex. add $9 more to your pledge for an extra base/lid/blinder) 

$3 - Add this amount to your pledge total for each additional "Lid" you would like to add to your order.  

Note: Each standard tray can also serve as a lid. The lid gives a more polished look and slimmer profile. 

$2 - Add this amount to your pledge total for each additional "Blinder" you would like to add to your order. 

 $4 - Add this amount to your pledge total for each additional "Base" you would like to add to your order.   

(Base will hold 2 sets of standard tokens, 18 dice, approx. 70 unsleeved/35 sleeved cards, and rule book underneath) 

This product is available in the US with shipping cost as:
US $8 Force Pledge/ $9 Force Master Pledge
.  

International Shipping will be charged based on actual shipping weight and a per package fee. You are only charged 1 package fee even for multiple pledges to the same address.   

Estimated shipping for International Pledges (assuming 1-2 stretch goals included):

International Force: $13
International Force Master: $18 

*Note: International shipping costs can increase with addonsstretch goals, or multiple pledges by actual weight per ounce they add. For example: An extra base, lid and blinder addons would cost you around $2.50 extra shipping cost. 

Risks and challenges

We are designing and manufacturing interlocking stackable plastic storage "bins". These will be produced and shipped locally (from St. Louis, MO). We have full access to the commercial grade machinery necessary to complete this project and produce rapid prototyping, but we are asking for your help to pay for the aluminum tooling, thousands of pounds of materials, and manpower necessary to make this a reality at an affordable price for everyone.

We have learned a lot from our first project and will be using heated die cutters to reduce time "cleaning" edges to make them smooth. We also made some minor changes to the locking components that allow for easier manufacturing, less waste and even better locking.

Adding custom colors can be a challenge as it adds at least several weeks to delivery time and much higher order quantities are required.

Shipping can be a challenge with any Kickstarter project. We will work to provide the best shipping price possible throughout the campaign. Shipping rates continue to raise but we just recently saw an increase so it should not go up again for a while.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support this project

  1. Select this reward

    Pledge $15 or more About $15

    Force Pledge

    (1) Zen Bins Destiny Set which includes 1 Base, 2 Standard Trays, 1 Blinder, 1 Lid (Holds 54 Total Dice)

    *If your mailing address is outside of the US, you will receive an invoice for actual shipping costs after the campaign ends. Expect longer delivery time to ship overseas.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    101 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge $19 or more About $19

    All Dice Pledge

    (5) All Dice Trays (Holds 168 total dice, 210 if lid is added). Compatible with Standard Card/Dice Trays and Base.

    *If your mailing address is outside of the US, you will receive an invoice for actual shipping costs after the campaign ends. See shipping section for estimates. Expect longer delivery time to ship overseas.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    33 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge $30 or more About $30

    Force Master Pledge

    (1) Zen Bins Destiny Set which includes 1 Base, 8 Standard Trays, 1 Blinder, 1 Lid (Holds 162 Total Dice)

    *If your mailing address is outside of the US, you will receive an invoice for actual shipping costs after the campaign ends. Expect longer delivery time to ship overseas.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    192 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (20 days)