Share this project

Done

Share this project

Done
3D Printing STL files for some of the iconic buildings of World War 2, from Normandy to Stalingrad
299 backers pledged £20,457 to help bring this project to life.
Last updated

About

£20,457

299

WOWBuildings War Across Europe 3D Printing stl Files

Here we go with a range of buildings and accessories that stretch from Normandy to Stalingrad.

All of the buildings (except some general ruins) are based onactual buildings that existed

so letys get down to it and show you what you get in the starter pack.

for the Infantry backing level you get the following starter pack files and any opened stretch goals

all of these files will come initially in 28mm scale but we have designed these to now scale down to 6mm scales (some detail will be very fine but test prints have shown they are ok)

this is 6mm scale of the ruin from the starter pack


FREE TEST FILE


not done this before but i cant think why, ok the link below has a fire station facia for you to test print, there is a 28, 15 and 6mm scale ready to slice and print, thius way you can see for yourself the quality and get an idea of how good these designs trun out

https://drive.google.com/open?id=1sBZDBARaDrIDCaOgIJWiux_uTXEX0siR


STARTER PACK

CARENTAN CENTER STREET PACK 1

STALINGRAD DEPARTMENT STORE

GENERAL RUIN 1 This file set containes the full building and the ruined version

CORNER RUIN

BONUS FUNDING OPENED WITHIN ONE HOUR STALINGRAD CHIMNEYS 


 STRETCH GOAL £1000 OPENED STALINGRAD FLOUR MILL

 STRETCH GOAL £1500 OPENED CARENTAN CENTER STREET SET PACK 2 

 STRETCH GOAL £2000 OPENED BRECOURT MANOR 

 STRETCH GOAL £2500 OPENED STALINGRAD TRACTOR FACTORY ENTRANCE 

 STRETCH GOAL £3000 OPENED STALINGRAD TRAIN STATION 

STRETCH GOAL £3500 OPENED STALINGRAD FIRE STATION

 STRETCH GOAL £4000 OPENED JUNO BEACH HOUSE

 STRETCH GOAL £4500 OPENED JUNO BEACH HOUSE ATLANTIC WALL 

STRETCH GOAL £5000 OPENED PEGASUS BRIDGE


 STRETCH GOAL £5500 OPENED LARGE CHURCH RUIN (wip)

 STRETCH GOAL £6000 OPENED MERVILLE BATTERY BUNKERS 

STRETCH GOAL £6500 OPENED CHURCH

STRETCH GOAL £7000 OPENED NORMANDY STREET RUIN SET

STRETCH GOAL £7500 OPENED DEADMANS CORNER (CARENTAN)

STRETCH GOAL £8000 OPENED PAVLOVS HOUSE

 STRETCH GOAL £8500 OPENED EURO STYLE BRIDGE (SECTIONED SO YOU CAN EXPAND IT TO YOUR OWN LENGTH)

  STRETCH GOAL £9000 OPENED BONVILLE MANOR (wip PICTURES IN THE UPDATE)


£9500 STRETCH GOAL OPENED DOCKYARD SETUP 

i will be adding to this and adjusting some of the buildings slightly but overall it wil only be better and more than it is now

 £10000 STRETCH GOAL CAFE INGOUF CARENTAN 

 £10500 STRETCH GOAL FACTORY RUIN 1 PLUS SCATTER RUBBLE

  £11000 STRETCH GOAL FACTORY RUIN MODULAR SETUP 

 modular factory setup is done, you can mix and match the sections or even have stand alone buildings 

  £11500 STRETCH GOAL ROLLING STOCK (RUSSIAN, GERMAN)  

I WILL TRY AND ADD A RUSSIAN ENGINE ASAP

  £12000 STRETCH GOAL  RAILWAY COAL YARD 

£12500 STRETCH GOAL CHATEAU MALTOT FULL AND DAMAGED VERSION WITH INTERIOR

£13000 STRETCH GOAL PALAIS DE JUSTICES NORMANDY

£13500 STRETCH GOAL OPENED ACCESSORIES PACK 

 £14000 STRETCH GOAL LENNINGRAD RUIN 

£14500 STRETCH GOAL STREET SHOP SET

£15000 STRETCH GOAL LANDING CRAFT

£15500 STRETCH GOAL LCI LANDING CRAFT

£16000 STRETCH GOAL LOCKED COUNTRY HOTEL i will add some window frames to this

 £16500 STRETCH GOAL DRY DOCK (sub not included, but is a free download off thingiverse (upscale it to 272mm length for the right size)


 £17000 STRETCH GOAL CARGO SHIP 

£17500 STRETCH GOAL CORNER SHOP RUIN

£18000 STRETCH GOAL AIRFIELD CONTROL TOWER

£18500 STRETCH GOAL  CITY BRIDGE

£19000 STRETCH GOAL COUNTRY BRIDGE

£19500 STRETCH GOAL LOCKED (wip) TWO EXTRA ADMIN STYLE BUILDINGS TO GO WITH THE DOCKYARD SETUP

£20000 STRETCH GOAL LOCKED (wip) A SET (2) OF D DAY BUNKERS

WELL YOU BROKE 20K WOW SO AS THE FINAL STRETCH AND A BONUS ALL IN ONE YOU GET A DUTCH STYLE TOWN CENTRE

Risks and challenges

DIGITAL MEDIA:
We strive to produce models that will print with as little support and parts as possible. Some models print in one go whilst most are split up into parts which must be printed separately and then assembled.

The file format of choice will be .STL and the models shall be zipped and made available to the user for download. The user is responsible for downloading their product and must have a valid internet connection and email with which to collect their reward, via internet download. We will keep the files on our system for at least three months after the first date of issue. The user must ensure that he collects the files within this time frame or risk forfeit.

Backers must realize that the resolution you obtain on your print is down to the system you use. Our high resolution files will give you almost render quality prints on high end SLA machines, whilst the same files will produce lesser resolution prints on standard FDM printers. At any rate, all the files have been previously tested on SLA and FDM printers and have shown satisfactory produce.

We recommend FDM Prints with at least a 400micron nozzle and 200 micron layer height for terrain. A 100 micron layer height will give you outstanding prints all round. We have also tested the files with larger nozzles, at 500 microns and decent results are possible on most prints, if the layer height and temperature is controlled correctly. 0.5(500 micron) nozzles are not recommended for miniature printing.

SLA printers should have no problems obtaining excellent resolution and finish even at 100 micron layer height although 50 micron layer height is recommended for minute sculpt detail clarity. We will try our best to split models so they will fit in smaller print beds like those found on SLA machines. Although miniatures and figurines can be split into smaller parts, large terrain pieces will require a standard 220x220mm print bed. Standard for FDM Printers like the 'Ender3'

We supply the user with a design that has been tested on conventional home hobby printers and is proven to print.

All the models are tested and sliced with 'Cura' software which is freeware and available to all backers for use. We recommend that backers use 'Cura' as it is fully tested with our models and we can offer customer support, if any problems are encountered. We are unable to give customer support for other slicing software and backers use this at their own risk.

When using our digital media, we do not hold ourselves responsible for the production or manufacturing process of the design, this is exclusively up to the user.

Users may modify models and files at their own risk and only for their own personal use. Modified files are not guaranteed by us and as such, users do this under their own risk and know how.

The Images shown on the campaign page are just for visualization and although they may come very close, they are not an exact representation of the final design or printed model, which may vary.

We reserve the right to alter any of the models shown, at any time, before delivery, with the intent of improving the design, or efficiency of production.

Learn about accountability on Kickstarter
Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge £1 or more About US$ 2

    Spy

    keep an eye on the movement of the KS until you decide which side to join and what commitment to the cause you make

    Less
    Estimated delivery
    9 backers
    £

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge £35 or more About US$ 45

    Infantry Level

    You get the starter pack files and any opened stretch goals (excluding random BONUS files unless specified)

    Less
    Estimated delivery
    9 backers
    £

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge £45 or more About US$ 58

    Officer

    you get the starter pack and ALL opened and ALL unopened stretch goals. no matter how far we stretch I will guarantee that at least one stretch goal will be unopened, so you keep stretching I keep adding. plus any randomly added BONUS files

    Less
    Estimated delivery
    157 backers
    £

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge £75 or more About US$ 96

    Replay Berlin

    This KS at the Officer level and the past Berlin KS

    Less
    Estimated delivery
    16 backers
    £

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge £75 or more About US$ 96

    Replay Operation Market garden

    This KS at Officer level and the past Operation Market Garden KS

    Less
    Estimated delivery
    11 backers
    £

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge £100 or more About US$ 128

    Complete Catchup

    This KS at officer level and the past Berlin and Operation Market Garden files

    Less
    Estimated delivery
    60 backers
    £

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Select this reward

    Pledge £140 or more About US$ 179

    Full Unlimited Seller Licence

    you get all of the officer level rewards and have the ability to sell the physical printed models for life (sales of the stl file is not allowed)

    Less
    Estimated delivery
    36 backers
    £

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (25 days)