Pump up the tyres, fill up the tank and lets roll
Its time to get mobile, so a whole range of vehicles land and air............maybe some water too, to get you well stocked up.
I am not going to break the wallet with these so as you can see there are a few backing options, and for those loyal guys out there that have bought the vehicle addon pack (as some are included in this KS) you get all unopened (guaranteed 2) at the standard backing level, so just back at the initial level and i will upgrade you to the top level.
I am open to what to cover as usual so voice any ideas, but for the initial start i have covered a range of vehicles, i do have some scatter terrain and buildings to add if we want this KS to go off at a tangeant like i usually do, thank you all in advance once again
Full Raptor Utility Tank with Turret options
Alien Recon Flyer
FUNDING REACHED THANK YOU BONUS OPENED and thank you
STRETCH GOAL £1000 OPENED BATTLE CHARGER PLUS ACCESSORY PACK
STRETCH GOAL £1500 OPENED MINE LAYER PLUS SCATTER TERRAIN
STRETCH GOAL £2000 OPENED ORC GARGANTUAN PLUS ARTILLERY GUN
STRETCH GOAL £2500 ORC ROLLER TRUCK OPENED
£3000 Stretch DWARVEN TUNNELLER open and closed door versions will be available OPENED
£3500 STRETCH GOAL RAPTOR TROOP/LANDING CARRIER CRAFT OPENED
£4000 STRETCH GOAL JETBIKE WITH VARIANT OPENED
£4500 STRETCH GOAL ORK RAM TANK OPENED
£5000 STRETCH GOAL ORK DRUM TANK AND HUMAN SCOUT BUGGY
£5500 STRETCH GOAL SPIDER TANK
£6000 STRETCH GOAL LOCKED RAPTOR RECOVERY AND MINE SWEEPER VARIANT
£6500 Stretch Goal Locked War Walkers (more pics in update)
£7000 STRETCH GOAL LOCKED HOVER ATTACK CRAFT AND LARGE DROPSHIP
£7500 STRETCH GOAL LOCKED DROP POD (TWO MAN)
£8000 STRETCH GOAL GUNTRUCK WITH 3 TRAILER OPTIONS LOCKED
£8500 SYTRETCH GOAL THE BANG BUS LOCKED
£9000 STRETCH GOAL TANK TRAILER LOCKED
EXTRA BONUS TO ALL £30 BACKERS AS A THANK YOU FOR YOUR CONTINUED SUPPORT (BUT NOT PART OF THE PHYSICAL PRINT OFFER)
BIG BERTHA MONSTER GUN
FULL PIC RANGE IN UPDATE
Risks and challenges
We strive to produce models that will print with as little support and parts as possible. Some models print in one go whilst most are split up into parts which must be printed separately and then assembled.
The file format of choice will be .STL and the models shall be zipped and made available to the user for download. The user is responsible for downloading their product and must have a valid internet connection and email with which to collect their reward, via internet download. We will keep the files on our system for at least three months after the first date of issue. The user must ensure that he collects the files within this time frame or risk forfeit.
Backers must realize that the resolution you obtain on your print is down to the system you use. Our high resolution files will give you almost render quality prints on high end SLA machines, whilst the same files will produce lesser resolution prints on standard FDM printers. At any rate, all the files have been previously tested on SLA and FDM printers and have shown satisfactory produce.
We recommend FDM Prints with at least a 400micron nozzle and 200 micron layer height for terrain. A 100 micron layer height will give you outstanding prints all round. We have also tested the files with larger nozzles, at 500 microns and decent results are possible on most prints, if the layer height and temperature is controlled correctly. 0.5(500 micron) nozzles are not recommended for miniature printing.
SLA printers should have no problems obtaining excellent resolution and finish even at 100 micron layer height although 50 micron layer height is recommended for minute sculpt detail clarity. We will try our best to split models so they will fit in smaller print beds like those found on SLA machines. Although miniatures and figurines can be split into smaller parts, large terrain pieces will require a standard 220x220mm print bed. Standard for FDM Printers like the 'Ender3'
We supply the user with a design that has been tested on conventional home hobby printers and is proven to print.
All the models are tested and sliced with 'Cura' software which is freeware and available to all backers for use. We recommend that backers use 'Cura' as it is fully tested with our models and we can offer customer support, if any problems are encountered. We are unable to give customer support for other slicing software and backers use this at their own risk.
When using our digital media, we do not hold ourselves responsible for the production or manufacturing process of the design, this is exclusively up to the user.
Users may modify models and files at their own risk and only for their own personal use. Modified files are not guaranteed by us and as such, users do this under their own risk and know how.
The Images shown on the campaign page are just for visualization and although they may come very close, they are not an exact representation of the final design or printed model, which may vary.
We reserve the right to alter any of the models shown, at any time, before delivery, with the intent of improving the design, or efficiency of production.Learn about accountability on Kickstarter
- (30 days)