Frequently Asked Questions
The height of your chair is based on your own personal preference and can be adjusted as needed. Ideally, your thighs should slope toward the floor at approximately 45 degrees. That, of course, means you will be sitting significantly higher than you do in a regular chair.
Don't worry. You will naturally get a feel for the height that is right for you when your pelvis naturally tilts forward and your spine the aligns itself perfectly above.Last updated:
Yes. As you are sitting higher up than normal with the Workhorse Saddle Chair, your desk also needs to be raised. This is very important, as slumping becomes impossible in your new sitting position. The rule of thumb is that your desk height should be about one inch below the height of your bent elbows when you sit at the desk.Last updated:
You have spent long periods of time sitting in a position that is ill-suited to your body, so your body may take some time to adjust. However, our bodies are great adaptors.
We suggest that if you start to get tired or feel discomfort, regularly change your position and get up for mini breaks.Last updated:
Are there any things I should do during the transition from my regular chair to the Workhorse Saddle Chair?
Taking regular breaks and changing your sitting position is recommended. By getting up and walking around or stretching gives the muscles a chance to rejuvenate.Last updated:
If you are sitting for lengthy periods, you do need a back and armrest. No matter what position you maintain, your body needs time to rest and restore blood flow to the muscles.
On the other hand, if you’re up and down all day, this is much less necessary.Last updated:
Ideally, no. The Workhorse Saddle Chair is designed so that you are balanced in a position of stability from which you can work. However, there is nothing wrong with leaning back or forward on the backrest while working. Our special pillow has also been designed to make the use of the backrest easier.Last updated:
No. Your entire desk or workstation needs to be lifted. We have also designed small desk lifts which can be placed under the legs of regular desks to raise the height.
Raised desks and workstations are widely available and affordable; please feel free to contact us for advice.Last updated:
This is normal, as the Workhorse Saddle Chair forces the weight is on your “sitting bones”. Again, the body will quickly get used to this, but initially, this may become a little uncomfortable. If you get up and walk around as recommended, this burning will subside.Last updated:
The Workhorse Saddle Chair sets your spine up in its optimal position.
This does 2 things:
It takes most of the load off the muscles that control your hands and shoulder.
Your hands are now closer to the shoulders and thus their base of support.
You will feel the increased hand control immediately when you sit on the chair.Last updated:
The chair is designed to have a little weight on the feet. This engages all the muscles in the legs, as well as the abdominals and core muscles. It also makes you very mobile.
However, there is no problem resting your feet periodically in whatever position you feel most comfortable.Last updated:
The weight of the chair differs depending on the model. Here are the approximate weights for each model. These may vary slightly depending on the type of gas lift or legs provided with your chair which is determined based on your height and weight. This information will be collected at the end of the campaign along with your colour selection.
Pro: 18.5kg | 40.8 lbs
Plus: 15.7kg | 34.8 lbs
Original: 11.5kg | 25.4lbs
Go: 10.2kg | 22.5lbslbs
Slide: 9.55kg | 21.1lbs
Rise: 17.35kg | 38.25lbs
Base: 4.75kg | 10.5lbsLast updated:
All models of the Workhorse Saddle Chair are accredited to take a maximum of 113 kg or 250lbs.
We've received our accreditation through the Business and Institutional Furniture Manufacturer's Association. This involves a drop and durability test on seat and back of the chairs.Last updated:
Please see the specific sizing specifications and standard height ranges for each model including line diagrams on our campaign page.
We have considered all heights of people using the chair. Our standard gas lift is suitable for people 1.5 metres – 2.10 metres tall (5ft – 6.6ft). You must keep in mind that the ideal position to get the maximum health from the chair is with your legs sloping down towards the ground at approximately 45 degree angle.
We also have smaller and larger gas lifts available by request for people that fall outside the standard height range. Where the chair is being used at a raised bench, desk or bar and your feet do not touch the ground, a foot-rest is available at an additional cost. This foot-rest comes standard on the Rise. This gas lift advice applies to all models of chair except the Base and Slide which have a static base. The Base is designed to be placed on a regular chair, and the Slide has been designed to suit a standard bench/bar height of 90cm though we have other sizes available on request.
If you require smaller or larger gas lifts and foot-ring, please message us to advise when you back the project and we will add this note to your order.Last updated:
If you would like to place an order for more than one chair, simply add the extra $ amount for the additional chair to your pledge, and message us via our Kickstarter page to advise the order you have placed. We will add this to our order report and confirm your order back to you via message on our Kickstarter page.Last updated:
We are currently negotiating with several logistics companies and our final shipping price will be based on the volume of orders we received in the campaign. It will be in line with similar size/weight products you may have purchased online, and we will aim to keep this cost as reasonable as possible for you. We have provided approximate weights for each chair in our FAQ’s section.Last updated:
Premium Bonded Leather
Providing a sleek designer finish, our premium bonded leather is durable, comfortable and easily cleaned. A technically advanced material made from recycling of natural leather along with other components to form an extremely strong, hard wearing yet soft and comfortable material ideally suited to the upholstery of chairs.
Luxury Top Grade Leather Upgrade
If you purchase our Workhorse Pro, we are offering the opportunity to upgrade to luxury top grade leather in the black or new buck brown with a range of other colours available if we reach our stretch goal.
Upgrade costs in US $119 ( US$99 Earlybird)
We also have the option of A-Grade mesh fabric in black only for all models.Last updated:
At the end of the campaign we will survey you to ask your colour selection and also provide your height and weight to ensure we provided the most suitable chair leg length.Last updated:
The Workhorse Saddle Chairs are superior to any other saddle chair on the market in several significant ways.
- The Workhorse chair in terms of function, comfort and style is quite unique. The patented chiropractic contoured base provides unmatched comfort and support while sitting. Most saddle chairs are uncomfortable over time and place particular pressure on the male genitals and pudendal nerve. Great care has been placed in eliminating this shortfall.
- The Pro and Plus models also have a changeable back and armrest. The patented rotating armrest provides two very different sitting positions and essential timeout for the large muscle groups.
- Finally the sleek designer finish of the Workhorse means it will fit in with your own style and interior design.Last updated:
The patented rotating backrest on the Pro rotates a full 360 degrees in both directions. It’s position is change by simply sliding a lever and takes seconds to change. This encourages regular seating position changes throughout the day providing your major muscle groups with much needed time out. A cushion is also provided so you can comfortably lean into the backrest.
The Plus model is a more economically version of the Pro and comes with a manually changeable backrest. This is simply unscrewed and moved from back to front then screwed back into place. It takes less than a minute to change the position on the backrest.Last updated:
The chair has been specifically designed by a chiropractor to maintain the spine in the most “spine friendly” position. This means weight is absorbed through regions and tissues designed to carry that weight. We suggest you consult with your doctor or surgeon if you have any concerns and feel free to message us at any time. We have had several patients having had laminectomies, spinal fusions, discectomies and spondylolistheses reporting a marked reduction in symptoms when sitting on the Workhorse Saddle Chair. We plan this to be a significant area of future research for the chair.Last updated:
Don't see the answer to your question? Ask the project creator directly.Ask a question