Funding Canceled Funding for this project was canceled by the project creator on November 25.
Photo-main
Play
00:00
00:00

Dear backers, Wiggly campaign will be closed down for a week and rebooted on Monday 12/2. 3rd axis and additional features are coming!

Please go to www.wigglyisnot.com for the current campaign!

Amazing news! Your rewards just doubled.

Dear early backers, friends,

I am incredibly excited to announce that due to a great deal we made with new suppliers, plastic manufacturer and a surprise investment outside of Kickstarter we will be able to build Wiggly at HALF THE ORIGINAL COST! This means that you would get a basic Wiggly for only $250 from now on. 

Our early supporters will appreciate this the most. For more details please refer to this update - http://is.gd/WO0MCh

Wiggly is a patent pending stabilized head for shooting with iPhone and GoPro cameras

     

How many times have you been disappointed with the shaky footage from your smartphone or GoPro? Have you wished you had smooth flowing shots like if they were filmed with a Steadicam? 

Most stabilizers are bulky and depend on gravity and weights to keep your camera steady. They are expensive and take a lot of time and skill to balance. Also, you can't really control the pitch the way a motorized gimbal allows you to do. 

Unlike anything you have seen before, Wiggly is compact, reliable and easy to use out of the box! Slide in your iPhone or attach GoPro with pre-balanced brackets and shoot. 

No messy wires - in like none, zip, nada, not even one small wire. Just a switch and a joystick. 

It can turn two full rotations on either axis (720 degrees). Try it out while doing that double-back-flip-360 on your BMX that you worked so hard to perfect. 

Wiggly is super-compact because it uses custom electronics that are half the size of that open-source square board that you see on similar devices. 

Swap out cameras in 20 seconds. Just take off and screw in another camera/smartphone holding bracket. Shoot. 

Control camera pitch using a joystick. It's like playing a video game on Sony PSP. 

Low-mode handle with another joystick. Say what? Just like that, tighten the screw and top joystick takes control. Enjoy your motorized crane. You're welcome. 

Wiggly is very sturdy because the parts that carry camera weight are made of high grade anodized aluminum. Very important because motion sensors are prone to self-excitement if the cradle get's wiggly (pun intended). 

 Your standard low mode handle is usually in the shape of letter C and it's not motorized. Wiggly's extension handle is Z shaped so it can be used for both low and high mode. You can go between low and high in one smooth motion while maintaining a perfectly horizontal shot. 

A very unique feature is a second joystick on the handle that allows the operator to control the pitch while shooting. Three AAA batteries power the handle and it takes over as soon as you attach it to the back end of Wiggly.

It's so compact, that even the smallest multi-rotors can lift it and fly for at least a few minutes. You can connect your extra channel to Wiggly and control the pitch with your remote from the ground. 

Rewards: 

 Because we are so far ahead with Wiggly's development there should be a very short production timeline. 

I made it to be as versatile as possible for a device that depends on perfect balance of the camera in front. Now we will explore creating brackets and holders for other popular compact cameras and smartphones. 

We are even working on a universal cradle - if you can balance your camera on it (up to a pound) - you will be able to shoot. There will be different settings for different camera wights to optimize performance.

Also, you will be able to link to Wiggly wirelessly via bluetooth to change settings and even control the arm. Here we have some big plans like time lapse mode and panoramic photo/video modes.  

  • Pitch range: software setting, +70/-90 degrees default
  • Roll range: optional, +/-60 degrees default
  • Time of operation: from 2 - 4 hours of continuous operation per charge (depends on settings and actual camera weight)
  • Main board: custom AlexMos 2-axis SimpleBGC
  • Connectivity: mini-USB, Bluetooth module coming soon

Why use wide angle lens for the iPhone? 

Just like on a film camera you will get a better, more cinematic result if you use different lenses. We are all about professional look here after all.

Test video:

 Wiggly gets a Sony Action Cam bracket! Watch it in action: 

Risks and challenges Learn about accountability on Kickstarter

I have put in a lot of effort into making Wiggly as production ready as possible. Even though prototype parts are 3D printed they have been designed so they can be injection molded. My supply chain is pretty tight and there's very little development left mostly on the inside of the Wiggly plastic parts.

However, there are always things that can happen that are out of my control, but rest assured that I will make sure they don't affect my delivery timeline too much.

Parts from overseas
Each Wiggly unit will be assembled and tested in my shop in Long Island City and most parts will be manufactured in New York and Connecticut in shops I have worked with previously and have tremendous confidence in. It's the few parts (like brushless motors) that are coming from abroad that may be delayed in transport or customs. I will do my best so you never even know about any issues with my supply chain.

FAQ

  • YES! My team and I are working around the clock to design cradles for other popular smartphones. Wiggly is designed to accept many different smartphones that are within its weight and size threshold. Watch out phablets!

    Last updated:
  • There is a list of compact action cams that we are checking off. First to get it's own cradle for Wiggly - Sony Action Cam! Updates with photos and videos will be posted on the project page. Stay tuned.

    Last updated:
44
Backers
$10,969
pledged of $50,000 goal
  • Pledge $15 or more
    You selected

    7 backers Limited (93 left of 100)

    Wide lens for your smartphone with Wiggly logo. Smartphones have pretty narrow field of view and this gadget will allow you to film more cinematic, wider angle footage. Thank you for supporting this project!

    Estimated delivery:
    Add $10 USD to ship outside the US
  • Pledge $35 or more
    You selected

    5 backers Limited (95 left of 100)

    You get a sweet matte black T-shirt for the set. It will make you invisible in reflections (kinda like Dracula) Thank you for supporting this project!

    Estimated delivery:
    Add $15 USD to ship outside the US
  • Pledge $250 or more
    You selected

    6 backers Limited (94 left of 100)

    NEW! Early-backer special HANDHELD WIGGLY with a bracket for iPhone and a compact battery charger. All you need to unleash your inner cinematographer - go ahead, make a scene... Thank you for your support!

    Estimated delivery:
    Add $30 USD to ship outside the US
  • Pledge $300 or more
    You selected

    0 backers Limited (100 left of 100)

    HANDHELD WIGGLY with holders for the iPhone and GoPro camera + compact battery charger. Take advantage of the best compact camera in the industry.

    Estimated delivery:
    Add $30 USD to ship outside the US
  • Pledge $400 or more
    You selected

    2 backers Limited (98 left of 100)

    HANDHELD WIGGLY package + LOW MODE HANDLE with joystick. Comes with brackets for iPhone and GoPro as well as a wide angle lens for the iPhone. Now you can add - motorized camera crane operator to your resume; you professional videographer, you.

    Estimated delivery:
    Add $50 USD to ship outside the US
  • Pledge $450 or more
    You selected

    2 backers

    You get Everything! HANDHELD WIGGLY kit, LOW MODE HANDLE with joystick, iPhone and GoPro brackets and a MULTI-ROTOR MOUNT with vibration dampeners. Explore aerial videography the way no one has done it before. You are awesome!

    Estimated delivery:
    Add $50 USD to ship outside the US
  • Pledge $485 or more
    You selected

    4 backers Limited (4 left of 8)

    Early-backer special HANDHELD WIGGLY with a bracket for iPhone and a compact battery charger. All you need to unleash your inner cinematographer - go ahead, make a scene... Thank you for your support!

    Estimated delivery:
    Add $30 USD to ship outside the US
  • Pledge $545 or more
    You selected

    3 backers All gone!

    HANDHELD WIGGLY with holders for the iPhone and GoPro camera + compact battery charger. Take advantage of the best compact camera in the industry.

    Estimated delivery:
    Add $30 USD to ship outside the US
  • Pledge $645 or more
    You selected

    2 backers All gone!

    HANDHELD WIGGLY package + LOW MODE HANDLE with joystick. Comes with brackets for iPhone and GoPro as well as a wide angle lens for the iPhone. Now you can add - motorized camera crane operator to your resume; you professional videographer, you.

    Estimated delivery:
    Add $50 USD to ship outside the US
  • Pledge $695 or more
    You selected

    2 backers All gone!

    You get Everything! HANDHELD WIGGLY kit, LOW MODE HANDLE with joystick, iPhone and GoPro brackets and a MULTI-ROTOR MOUNT with vibration dampeners. Explore aerial videography the way no one has done it before. You are awesome!

    Estimated delivery:
    Add $50 USD to ship outside the US
Funding period

- (30 days)