This project will only be funded if it reaches its goal by Sun, April 21 2019 4:01 PM UTC +00:00.
STL FILES FOR 28MM FUTURE MONORAIL
The idea behind this project is to supply STL files to allow you to print your very own Mono-rail for use as scenery for 28mm Wargames
All the files are printable without supports and have been test printed on 3 different entry level consumer printers to ensure they are robust
The track is composed of 200mm long straights and 140mm curved V section track.
Trains can be moved along via rotating grippers mounted on the bases of the Engines and Carriages.
Track is mounted on top of sturdy support pillars via angled pins. The track can be assembled and disassembled for storage and re-positioning.
Engines are composed of a body file and the base and rotating track gripper files.
Carriages are composed of various files depending on style but fall into body, moving parts, base and rotating grippers types.
This is the basic reward level and gets you:
Standard Train Engine 1+2, Passenger Car 1 with Sliding Doors and Flatbed car
45 and 55 degree corners, 200mm straights, supports and track end buffers
STANDARD TRAIN ENGINE 1 + 2
PASSENGER CAR WITH SLIDING DOORS
Roof can be removed and doors slide
Extra Bonus Flatbed V2!
Fits Terrain Crates from other popular range
All of the above STATION LVL 1 REWARDS plus access to ALL UNLOCKED STRETCH REWARDS
STRETCH GOAL LEVEL 1 UNLOCKED!!
STRETCH GOAL LEVEL 2 UNLOCKED!!
STRETCH GOAL LEVEL 3 UNLOCKED!!
STRETCH GOAL LEVEL 4 UNLOCKED
1st Gothic Train being assembled!
STRETCH GOAL LEVEL 5 UNLOCKED
STRETCH GOAL LEVEL 6 UNLOCKED
This kickstarter is selling files for personnel use only. No licence is granted for commercial use or reproduction.
If you wish to discuss commercial licensing please message me to discuss.
Please do not share files on free sharing sites after kickstarter
Risks and challenges
STL level rewards - all basic level rewards have been designed and printed multiple times on 3 different low and mid priced 3d printers - Anet A8, Creality Cr10s and a Anycubic I3 Mega - this gives a good cross reference of the most common printers.
All files print without support unless stated and have been designed for ease of printing and minimal material usage.
Majority of stretch goals are draft designed to the same methodology and will be rigorously tested before release.
Pre-printed train set runs have been kept limited in number and scope to ensure a reasonable delivery time.Learn about accountability on Kickstarter
- All gone!