Share this project

Done

Share this project

Done
Almost twice as fast as the MacBook Pro 13", for VR, AR, and AI projects. The first Maker PC with the AMD Ryzen™ Embedded V1000
Almost twice as fast as the MacBook Pro 13", for VR, AR, and AI projects. The first Maker PC with the AMD Ryzen™ Embedded V1000
Created by
1,447 backers pledged $635,769 to help bring this project to life.

Use this space to cheer the creator along, and talk to your fellow backers.

Have a question?

Only backers can post comments. Log In
    1. Krzysztof Piotrowski 2 days ago

      @gv: copper heatsink would be great anyway! :)

    2. Missing avatar

      gv 2 days ago

      @Phenic: those mounts are designed for replaceable CPUs. A CPU socket and a CPU with IHS (standard desktop mainboard) are much higher than a PCB-mounted CPU without IHS (BOLT and notebook mainboards), so AM4/S1151 locking mechanism won't work.

      The second problem is the size: BOLT has dimensions of 120×120 mm and an AM4 mount is 90×54 mm large, so simply it is too large for this board.

      @UDOO: please use as large and high as possible heatsink having very good thermal conductivity. And maybe you should sell a copper version in your shop for people who are obsessed with silence (like me :) ).

    3. Missing avatar

      Phenic 2 days ago

      @Udoo Can you use a standard like 1151, AM4 or something similar for the heatsink? It would increase compatibility greatly.

    4. UDOO 4-time creator 3 days ago

      @Satoshi Yamaguchi: We will collect backers address information nearer to the fulfilment of the rewards.

      @Patrick Bregman: The current revision of the board has mounting holes to mount a 6cmx6cm heatsink, however, this may change as the design of the board progresses.

    5. Missing avatar

      Satoshi Yamaguchi 5 days ago

      I'm looking forward to it. But I might move(undecided)...

    6. Patrick Bregman 5 days ago

      Will the heatsink use a normal mount so we could swap it out for an other heatsink? Or is it at least somehow compatible with an existing mount?

    7. UDOO 4-time creator 6 days ago

      @Renny: The shipping company has not yet been decided.

      @Joschka Mick: :)

    8. Renny 6 days ago

      what shipping company you guys going to use?

    9. Missing avatar

      Joschka Mick on

      What happend? No "We did it"-Update when the campaign finished? 🤷🏻‍♂️

      Are you guys thinking about something? A little surprise? 😊

      Looking forward to receive my Udoo!

    10. UDOO 4-time creator on

      @andy: We will publish a getting started guide for the UDOO BOLT nearer to shipping. For example, here is the guide for the UDOO X86, our previously crowdfunded board: https://www.udoo.org/get-started-x86/
      The starter kit does not include a case, but this item will be available form our shop, and we will publish a project update once it can be pre-ordered.

      @El Wafir: It is not possible to raise an invoice in the time you require, as we do not receive the funds from Kickstarter until another week has passed, and we then need to process all the associated information we get sent at the same time. We will send you a message soon.

      @gv: Thank you for sharing the links about the future support in ROCm.

    11. Missing avatar

      andy on

      I pledge $348 for early bird udoo bold v8 + kit 4gb.
      Is it come with case?
      If not, how can I order one?
      Thanks

    12. Missing avatar

      andy on

      Thank you for your infomation

    13. Jito463 - WoOS, LofUT on

      Andy: Additionally, you may need to buy an M.2 SSD (or a SATA one), as the built-in 32GB eMMC storage is quite small.

    14. Jito463 - WoOS, LofUT on

      Andy: The Bolt is a whole computer, you just need a keyboard, mouse, monitor and to install an OS (Windows, Linux, etc). If you didn't order it with the case, you'll need to take some precautions to ensure it's protected against static electricity and spills (among other things).

    15. Missing avatar

      andy on

      Hi
      I don,t really understand about computer.
      What do i have to add to make udoo bolt a computer , so my daughter can use it.

      Thanks

    16. Missing avatar

      El Wafir on

      Dear @UDOO.
      Congrats for the campaign!
      Looking forward to receiving the board!
      I pleaged for a 32GB RAM UDOO board. My accountant is asking for an invoice for this payment. He says the recipt from kickstarter is not a supporting document.
      What is the procedure to get a proper invoice? We would need it in the following week. Big thanks.

    17. Missing avatar

      Tarmizi Izzuddin on

      @gv Thanks for the info! based on the thread looks like support is coming soon

    18. Missing avatar

      gv on

      @Tarmizi Izzuddin: Ryzen Embedded V1000 series are based on Raven Ridge which is *currently* not supported by ROCm, but it will support sometime in the future:

      https://github.com/RadeonOpenCompute/ROCm/issues/435
      https://github.com/RadeonOpenCompute/ROCm/issues/399#issuecomment-386922775
      https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver/issues/42

    19. Missing avatar

      Tarmizi Izzuddin on

      Dear udoo team, will the Radeon Open Compute (ROCm https://github.com/RadeonOpenCompute/ROCm ) work with udoo bolt ? This is because with the recently released of ROCm Tensorflow 1.8 ( https://gpuopen.com/rocm-tensorflow-1-8-release/) many exciting AI applications can be developed by leveraging the GPU. Also if possible can you share with us some AI demo using the udoo bolt? many thanks !

    20. UDOO 4-time creator on

      @Jesper Kiaer: When a backer's pledge is collected by Kickstarter on our behalf, they send an email that includes the details of the pledge and the reward selection.
      https://help.kickstarter.com/hc/en-us/articles/115005133053-Will-I-receive-a-receipt-for-my-pledge-

      The receipt provided by Kickstarter is sufficient for most backers, however, for our previous campaigns, we raised invoices upon request by those who needed it. Please note that it will be easier for us to manage this type of request after the backer survey has been sent, as we will have all the necessary backer information.

    21. Missing avatar

      Jesper Kiaer on

      Is it possible to get an invoice for the pledge payment?

    22. UDOO 4-time creator on

      @Chad Ringström: The metal case will be available from the UDOO shop. There will be 3D printable cases shared on Thingiverse by the community https://www.thingiverse.com/search…

      We will publish the 3D model of the board before December, so interested backers can start designing cases before they receive their rewards.

      For those checking this comments section for guidance on fixing a failed pledge payment, please refer to this page by Kickstarter https://help.kickstarter.com/hc/en-us/articles/115005133293-A-project-I-m-backing-just-succeeded-and-my-pledge-was-declined-What-do-I-do-

    23. Missing avatar

      Ondrej Pristach on

      My Pledge status is Collected ! Awesome, i have to finish the 3d models for printing until it arrives :)

    24. Chad Ringström on

      Please ad an option to purchase a case in the survey or at least make the case open hardware as well so I can print one.

    25. UDOO 4-time creator on

      @Alester Leongpuh: Yes, there is graphics API support for OpenGL 4.6

    26. Missing avatar

      Alester Leongpuh on

      Does this support open gl 4.x?

    27. Sami-Pekka Hallikas on

      I had some issues because I went "All in", this is my fourth UDOO product, so I'm really confident that they deliver what they promise. I just love my x86, even it is really underpowered. I'm glad that I'm in first 15 backers :D

    28. Timothy Stark
      Superbacker
      on

      Yay! My pledge was successfully collected. I am now waiting for my Bolt V8 this year so hopefully!

    29. UDOO 4-time creator on

      @kongbaraku: The board design has mounting holes to mount a 6cmx6cm heatsink. However, this may change as the design of the board progresses.
      The SoC processor is soldered onto the board and not removable.

    30. Missing avatar

      kongbaraku on

      I have question. If I will change heatsink CPU . What type CPU socket. Am 4?

    31. Missing avatar

      Herbert Hotz on

      @Jito463 - WoOS, LofUT: Credit card problem is resolved now. Thanks for you advises!

    32. UDOO 4-time creator on

      @All: The pledges are now being collected by Kickstarter on our behalf. If anyone has their pledge declined by their card issuer, Kickstarter will send an email about solving the issue. They also have published this topic in their FAQ https://help.kickstarter.com/hc/en-us/articles/115005133293-A-project-I-m-backing-just-succeeded-and-my-pledge-was-declined-What-do-I-do-

    33. Missing avatar

      KC on

      @Laura Gales Thank you, and congratulations @UDOO

    34. Jito463 - WoOS, LofUT on

      Herbert: You can try running your card again (it may have been a temporary glitch), otherwise you'll need to contact your bank. It's possible they may have restrictions in place that are blocking it.

    35. Derek Chandler on

      My credit card company declined the transaction but it should be cleared now. Please try again.

    36. Missing avatar

      Herbert Hotz on

      @UDOO Administration: My Credit Card seems to cause problems. Who can I contact to resolve this issue. The card is of course valid!

    37. UDOO 4-time creator on

      @Herbert Hotz, @Claudio Enrico Campani, @Krzysztof Piotrowski: Thanks for the congratulations. We are very excited to be able to bring a Ryzen board UDOOers! and look forward to sharing updates along the way!

      @Jito463 - WoOS, LofUT: Yes, there will be documentation on the firmware.

    38. Missing avatar

      Herbert Hotz on

      @UDOO: Great - thanks fro your quick response!

      And, ...
      congratulations and great thanks to all who managed that this project reaches reality now. I'm eagerly waiting ...

    39. Jito463 - WoOS, LofUT on

      Will there be documentation for the BIOS settings made available later (e.g. boot menu key, layout of settings, etc)?

    40. UDOO 4-time creator on

      Thank you UDOOers!

    41. Claudio Enrico Campani on

      Yeah! Congratulations to UDOO and to all the bakers!

    42. Krzysztof Piotrowski on

      Congrats @UDOO!! Cant wait to get the bolt in my hands!! :)
      Too bad we have not reached the stretch goals (2nd and 3rd).
      Cheers
      Krzysztof

    43. UDOO 4-time creator on

      @Herbert Hotz: Yes, the UDOO BOLT supports Wake-on-LAN and has a battery backed RTC.

    44. Missing avatar

      Herbert Hotz on

      @UDDO: 1) Support for Wake-on-LAN, 2) Battery powered clock?

    45. UDOO 4-time creator on

      @Julien: Not out-of-the-box, but this capability can be added by the user, by utilising the side-expansion header to connect to a connectivity module designed for an MCU.

    46. Missing avatar

      Julien on

      Hello,
      Will the MCU be able to connect to the internet while the CPU is powered off or sleeping?
      Thank you!

    47. DnD Gamer on

      Thank you all for the replies. They helped make my decision.

    48. UDOO 4-time creator on

      @Tarmizi Izzuddin: Thank you!

      We appreciate all the friends we have made over the years!
      And awesomely, today is Friendship Day! https://twitter.com/UDOO_Board/status/1023923856229191680

    49. Missing avatar

      Tarmizi Izzuddin on

      in the last hours, i am succumbed to back udoo bolt. This is my fourth time backing up udoo's team , after dual, neo and x86. Damn u , udoo. Hope to tinker with it in the end of the year,

Show older comments