Share this project

Done

Share this project

Done
A customizable enclosure system for building project and small scale production boxes. 
It's a box. Your box!
A customizable enclosure system for building project and small scale production boxes. It's a box. Your box!
388 backers pledged £9,614 to help bring this project to life.

New rewards!!

3 likes

Two new SliceCases has been added as new rewards for the campaign: one for the White Bread Shield and one for the AVR Dragon.

SliceCase for White Bread Shield

SliceCase for White Bread Shield (open)
SliceCase for White Bread Shield (open)
SliceCase for White Bread Shield (closed)
SliceCase for White Bread Shield (closed)
SliceCase for White Bread Shield (open inside)
SliceCase for White Bread Shield (open inside)

 The SliceCase for the White Bread Shield has the same width (that is the shorter side on these pictures) as the SliceCase for Arduino series. As you can see on the last picture it also has the same mounting holes as for the regular Ardunio, so that one also fit as well as an extra set of holes (not visible) which makes it possible to mount the Arduino Mega. So if you need a case for an Ardunio with some room to spare - then this is your solution.

It's available in many different colours and it comes with an open top, but the cutout is delivered as well and this can be used as an easy access lid. You simply put it into place and it'll rest on the inner fingers on the corners. It has 8 internal layers and a total of 10 layers.

Max inner dimensions: 75w * 163d * 24h mm  
Square inner dimensions: 59w * 147d * 24h mm
Outer dimensions: 88w * 173d * 30h mm

As always with the SliceCase system the full range of other components like closed lid, L/U/O shaped slices, light slices and so on are available. The flat surfaces (bottom, top and sides are also customizable.

SliceCase for AVR Dragon

SliceCase for AVR Dragon
SliceCase for AVR Dragon

 The SliceCase for AVR Dragon is aimed at simply providing a case for this programming platform. So it's not a prototyping platform per se but more a tool. 

It comes in many different colours, but the lid is always transparent by default. The top has a cutout for access to the headers and for a mounted ZIF socket. 
This version comes with self adhesive mounting pads as the 2.5mm mounting holes are to small for standard plastic screws. The mounting holes are cut out of the bottom plate the easy the alignment. It has 5 internal layers and a total of 7 layers.
It only uses corners with fingers on the outside to minimize the space used.

Still, as always, the full range of slices are available and flat surfaces are customizable. 

Max inner dimensions: 71w * 120d * 15h mm
Square inner dimensions: 55w * 104d * 15h mm
Outer dimensions: 80w * 129d * 21h mm

Cheers,

Christoffer

marzsman, Halina Kaja Mydin, and 1 more person like this update.

Comments

Only backers can post comments. Log In