Project image
)}
AU$ 66,239
pledged of AU$ 220,000pledged of AU$ 220,000 goal
201
backers
Funding Unsuccessful
The project's funding goal was not reached on Sun, May 31 2015 2:00 AM UTC +00:00
AU$ 66,239
pledged of AU$ 220,000pledged of AU$ 220,000 goal
201
backers
Funding Unsuccessful
The project's funding goal was not reached on Sun, May 31 2015 2:00 AM UTC +00:00

About

The Trinity ONE is your 'go to' device for brewing specialty coffee. Combining a number of brewing methods including pour over, air pressure, and cold brew, it reduces bench top clutter and provides a functional, minimalist brewing experience. To top it off, the Trinity ONE is presented in a high quality stainless steel and black walnut timber finish. 

Designed to be on display. Not hidden away.

The Vision

The vision for the Trinity ONE is simple - to create a high quality brewing device for high quality coffee!

When I first started searching for a product that was a step-up from the huge range of drippers, press, and pour over brewing devices already available, I noticed that there wasn't really a step-up alternative to choose from! 

Hence, I set to work on exploring the idea of a brewing product which is not necessarily the cheap and easily transportable option, but is more of an appliance that is intended to be featured on a bench, and is designed to be intriguing and interactive.

The Trinity ONE is a project which I have invested in heavily to get to this point - in funds, time, and energy. I am proud to be bringing my prototype to Kickstarter. I really do hope that I get to see you on the 'other side'. 

If you have any questions about the Trinity ONE after reading the information provided below, please feel free to email me at mark@trinitycoffee.co.

Cheers!

The Brew Chamber of the Trinity ONE is double-walled for thermal insulation. The outer chamber is glass, and the inner chamber is moulded copolyester, a high-grade heat resistant BPA-free material. The inner chamber comprises a cylindrical section for brewing air pressure method (compatible with paper and metal disk filters), and a conical opening for brewing pour over (compatible with paper and metal cone filters). Cold brew can be achieved by using both sections of the brew chamber. It is also possible to achieve 'concurrent brewing', combining pour over and air pressure method at the same time. 

The Press Cylinder is used for brewing under mild air pressure. The end cap creates an air tight seal in the cylinder section of the brew chamber, and the Press Cylinder provides sufficient weight (approx. 3kg) to press without manual assistance. Standard press time and pressure can be customised by changing the hardness of the O-Rings which are fixed onto the end cap, or by adjusting grind coarseness. Please note, the Trinity ONE is NOT an espresso maker! 

The Trinity ONE Filter Head has been designed to house a paper or metal disk filter, and fixes to the bottom of the brew chamber. The Filter Head includes a flow control feature, which allows the user to retain coffee within the insulated chamber and prevents unwanted drips from occurring throughout the brew process. After the brewing process is complete, the Filter Head can be removed and the spent grounds can be easily discarded. 

As you can see in the promotional video, the Trinity ONE is at the working prototype stage. The next steps involve transitioning from prototype into production. Specifically, this transition will involve:

  • Final design refinements - includes finalising detailed design documentation and specifications, and ensuring suitable tolerances are in place for production.
  • Setting up the factory - this involves acquiring a broad range of factory equipment and sourcing of materials required for production.
  • Manufacturing - this involves manufacturing the first production run and includes a series of quality control checks to ensure the product is in accordance with technical specifications and requirements.
  • Shipping and logistics - this is a significant process as a start-up business without established distribution channels. I will be working hard to ship as quickly and efficiently as possible!

See an indicative timeframe below, which shows the estimated timing for each of the above phases and importantly, when you can expect delivery!

  • Kickstarter (4 weeks)
  • Final Design Refinements (9 weeks) 
  • Pre-Production / Factory Establishment (12 weeks)
  • Manufacturing (10 weeks)
  • Shipping and Logistics (4 weeks)

Based on the above and following a successful campaign, your Trinity ONE shipment is estimated to arrive in January 2016. I will be working very hard to deliver on time, and will be working even harder to deliver sooner!

An estimated breakdown of the significant budget components for the Trinity ONE Kickstarter campaign is shown in the following diagram. 

With your support, the Trinity ONE can transition from "prototype to product", and can finally appear in cafes, brew bars, homes and offices all around the world. If successful, you can be one of the first in the world to own the Trinity ONE. 

If you are interested in supporting the Trinity ONE Kickstarter campaign, you can be rewarded by the pledge options presented below. Get in quick for the Trinity ONE early bird discounts! 

Note, the Trinity ONE 'Steel and Black Walnut edition' is what you see in the video, drawings and photos. 

If you don't think you would like to purchase the Trinity ONE at this time but are still interested in supporting, there are other options including a Trinity Coffee Co. Keep Cup or T-Shirt, or both!  

 project video thumbnail
Replay with sound
Play with
sound

 Shipping Rates and International Zones

Please use the following steps in order to confirm your applicable rate and zone for shipping the Trinity ONE.

  • Step 1 - When making your pledge, select the applicable shipping destination based on your location. 
  • Step 2 - If your location is not listed, then please check which zone you reside in by clicking HERE
  • Step 3 - You can then select from a shipping destination option that matches the same zone as your destination. Note, it's important to ensure you match the zone, rather than selecting a nearby country or geographical location. 

Please also note the following important information:

  • Due to lack of established distribution channels, zones higher than 7 are classed as "Rest of the World".
  • If you have any questions on shipping, please email me at mark@trinitycoffee.co and I will be happy to clarify and confirm a suitable zone for your destination. 

Infinity Design  |  Nomad Film and Television  |  Prokure  |  Reverends Fine Coffee  |   The Directory  |   Jo Folker   |  Justin Thiang   |   All Trinity ONE supporters! 

Risks and challenges

Please read before pledging!

The Trinity ONE is not an "off the shelf" product. The product is currently at the prototype phase, and there are challenges and timeframes involved in getting the product to you when compared to purchasing from a store.

Please read all the information provided so can make an informed decision on your pledge! Shoot me an email if anything is unclear or if you would like any further information (mark@trinitycoffee.co).

By pledging your support for the Trinity ONE you are allowing innovation and new brewing possibilities to be realised!

Throughout the process following Kickstarter, I will keep communication channels open to keep you updated on where the project is at up until the final shipment!

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge AU$ 10 or more About US$ 7

    Get the Trinity ONE Digital User Handbook in PDF format.

    Includes tutorials, photos, diagrams and an introduction into brewing methods and recipes.

    Less
    Estimated delivery
    0 backers
    AU$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge AU$ 25 or more About US$ 17

    Trinity ONE Keep Cup - Standard

    Choose between the Trinity or ONE edition!

    You will be surveyed after Kickstarter to determine which edition you would like.

    Less
    Estimated delivery
    Ships to Only certain countries
    1 backer
    AU$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge AU$ 35 or more About US$ 24

    Trinity ONE Keep Cup - Brew

    Choose between the Trinity or ONE edition!

    You will be surveyed after Kickstarter to determine which edition you would like.

    Less
    Estimated delivery
    Ships to Only certain countries
    4 backers
    AU$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge AU$ 50 or more About US$ 34

    Trinity Coffee Co. T-Shirt

    Choose between Trinity or ONE edition!

    Men's sizes: S, M, L, XL, XXL
    Women's sizes: XS, S, M, L, XL

    You will be surveyed after Kickstarter to determine which shirt and size you would like.

    Free shipping within Australia.

    Less
    Estimated delivery
    Ships to Only certain countries
    1 backer
    AU$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Reward no longer available

    Pledge AU$ 250 or more About US$ 172

    'Super Earlybird' Trinity ONE Reward Pack
    $250 AUD / $195 USD

    Includes:
    1 x Trinity ONE
    (Steel & Black Walnut Edition)
    Trinity ONE Digital User Handbook

    Estimated RRP $450 AUD

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Reward no longer available 150 backers
    AU$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge AU$ 275 or more About US$ 189

    'Earlybird' Trinity ONE Reward Pack
    $275 AUD / $215 USD

    Includes:
    1 x Trinity ONE
    (Steel & Black Walnut Edition)
    Trinity ONE Digital User Handbook

    Estimated RRP $450 AUD

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 26 backers
    AU$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Select this reward

    Pledge AU$ 300 or more About US$ 206

    'Kickstarter Special' Trinity ONE Reward Pack
    $300 AUD / $235 USD

    Includes:
    1 x Trinity ONE
    (Steel & Black Walnut Edition)
    Trinity ONE Digital User Handbook

    Estimated RRP $450 AUD

    Less
    Estimated delivery
    Ships to Anywhere in the world
    1 backer
    AU$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  8. Select this reward

    Pledge AU$ 600 or more About US$ 412

    'Two Pack' Trinity ONE Reward Pack
    $600 AUD / $470 USD

    **Buy with a Friend, Save on Shipping**
    **Set up a Brew Bar or Cafe**

    Includes:
    2 x Trinity ONE
    (Steel & Black Walnut Edition)
    Trinity ONE Digital User Handbook

    Estimated RRP $900 AUD

    Less
    Estimated delivery
    Ships to Anywhere in the world
    4 backers
    AU$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  9. Select this reward

    Pledge AU$ 1,000 or more About US$ 687

    'Four Pack' Trinity ONE Reward Pack
    $1,000 AUD / $780 USD

    **Suitable for Online Seller or Retailer**
    **Set up a Brew Bar or Cafe**
    **Free Domestic Shipping in Australia**

    Includes:
    4 x Trinity ONE
    (Steel & Black Walnut Edition)
    Trinity ONE Digital User Handbook

    Estimated RRP $1,800 AUD

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 9 backers
    AU$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (30 days)