Here is Tokamak Studio - digital assets creator.
What is this project all about?
These models were created for the Bantam Alley® StudioLevel Kickstarter Project and licensed only for this purpose. This project was Kickstarter Exclusive and the product will not be available in retail. So Tokamak Studio wants to unleash its license and bring it to more people.
What we need the funds for?
StudioLevel has talented artists that create tons of handmade stuff (check out his new kickstarter project here) and we would like to bring their work as a 3D printable content too. For this purpose, Tokamak Studio needs a professional 3D scanner, so every suitable project could be delivered in digital as well as analog form.
What you will get?
The urban set consists of:
- street hatches
- gas pump set
- water containers
- beer crates
- military boots
- electrical cases
- air conditioners
- trash cans and bins
- park meter and poles
- safe office set (copy machine, PC, water dispenser, water dispenser bottle)
- tools closet
- tool case
- 4 picture frames
- bag of textiles
- grated lamps
The industrial set consists of:
- hatches (15pcs)
- half pipes set (14 pcs)
- pipes set (20pcs)
- diesel engine
All the objects where battle tested and printed by StudioLevel. An SLA printer was used, but the first tests were done in FDM with decent results in the 28-32mm scale - except the smaller objects that were too fragile (especially Urban set items).
For printing get best results in the 28-32mm scale, we recommend using an SLA printer. As you can see Urban Set consist of a large number of small parts and SLA should be considered. For Industrial Set that consist of rather bigger items FDM as well as the SLA printer can be used, of course, always consider the SLA as a better and more precise option. Nowadays you can buy SLA printer for as low as $250.
To be sure that files are optimised we tested them in the commonly used slicers as Cura, Slic3er, MakerBot Print.
How does the license work?
As a Backer you have the right to print and duplicate prints by casting or any other method. The License does not allow printing, casting and selling your prints/casts and reselling .STL models files by any means as a whole or as a separate product.
Any stretch goals?
We decided to put every 3D model that we got inside this project, but we think that it would be nice if there will be some extras. To make it happen, please share/tweet this project.
Stretch goals will be:
- street Lamps (5 variations of one lamp - tall, on-wall standing (single and double), on-wall hanging (single and double))
- broken safe (broken safe + broken safe doors)
- broken fridge (open fridge + separated doors)
- Construction Set (7 metal modular supports)
- Plastic Pipes Set (7 hollow modular pipes)
All models Pledge: will get all that models.
Share via twitter here!
What is the scale of models?
The models are in the 28-32mm scale and can be adjusted to any desired scale.
After the project has been successfully funded Tokamak Studio will start bringing you every suitable StudioLevel project in digital form. You can see their new epic kickstarter here!
Risks and challenges
This project is risk-free. The models are ready. The only thing that will have to be managed is the license distribution. We will provide additional support after the files have been sent to the backers.Learn about accountability on Kickstarter
- (23 days)