About this project
Thanks for coming to our page! Please make sure to scroll all the way down this page, we explain all kinds of things like "Where your money goes?", "Who are we?", "Overfund Goals", and lots of other details you may want to know about the products you are going to pledge for and who you are pledging to. :)
If we reach $7,000 - Pin Ups 4-6 will be given to everyone who purchased any print package! If you purchased a package with small print(s), you will get a small print(s), and if you purchase a package with a large print(s), you will get a large print(s) of it. (If your package has both, you get both :D. Same with canvas prints, and IPhone cases.
If we reach $14,000 - everyone that purchased any print package, gets the limited edition 7th Pin Up! If you purchased a package with small prints, you will get a small print, and if you purchase a package with a large print, you will get a large print of it. (If your package has both, you get both :D). You will also get an IPhone case, and/or a Canvas Print of the 7th Pin Up if you pledged for that reward. Plus, if we reach this goal, the 7th Pin Up will become a KICKSTARTER EXCLUSIVE!
If this Kickstarter is a success, or not, we will do other Kickstarters including one where we print Ninjabot's First Art Book, that will include pictures from original sketches of all of our prints and notes for all the prints we have done at TheNinjabot.com. It will be a hard cover book and we have tons ideas for it already! And another one will be for our CafeBot Restaurant :D! Woot!
It's simple really! We want to create art and be able to share it with you! We are two kids that didn't have a better idea than to create a company in the middle of a bad economy! :D I know, I know! Genius! We started the company when we both had office jobs, but a few months back we both lost our jobs. Since then, we have been concentrating in Ninjabot, and on creating Fine Art Prints, but it has been getting more and more difficult to fund the print production of our prints ever since we lost our jobs.
This Kickstarter will help us fund the printing production of Pin Ups 1-3 that we have had for a while, but haven't been able to print in large quantities yet.
This Pin Up series was inspired by our love of pin ups, and bright colors! This series will be a total of 6 pin ups! Although pin ups 4-6 have not been started yet, those pin ups will be prized to you and others if we reach a certain goal in our Kickstarter (More details under the "Overfund Goals" section above).
These are the digital and full pictures of Pin Ups 1-3
But wait! There is more!
This is how the Pin Ups first started!
Everything we do is first sketched out. Then, we scan them in for reference and build in the computer.
These are some samples of what some of your prizes will look like when you get them! We took some close ups of our sample prints to show you the texture that they have and the print quality.
Small Print Pictures
Large Print Pictures
We, Arnel and Estefania, are Ninjabot! We are both artists trying to make a name for ourselves. We love to create fine art prints about anything, and everything that inspires us!
Arnel is a Graphic Designer and Illustrator. Estefania is a Motion/Graphic Designer.
Your money is going towards the cost of the high quality printing production of all the prints (Small and Large), IPhone cases and canvas prints. It will also cover the cost of all the packaging materials to properly send all of these products to you in a safe way. It also covers the postage for them too.
More details below.
Details: These are 4"x6", printed on 15pt Card Stock.
Shipping Materials: Wrapped in plastic bags to be protected against damages while being shipped. Then packed in a 6"x8" flat envelope.
Details: They are 13"x19", printed on Mohawk Super Ultra White #100 paper stock.
Shipping Materials: They will be carefully bagged, and taped to a (15" width x 19"length x 1/4" thick) cardboard backing for protection against corner damaged while being shipped. It will be packed in a 17"x21" flat envelope directly to your door!
IPhone Cases (compatible with IPhone 5, 4/4S, 3G/3GS, IPod Touch 4G, and BlackBerry Bold 9700 only, sorry):
Details: Impact resistant, flexible PolyCore shell. Its form fit feature covers back and corner. Very light and it has a soft-touch finish with access to all ports and functions.
Shipping Materials: Bagged to carefully protect it from scratches while being shipped. Then packed in a 6"x8" flat envelope.
Canvas Prints: Details: These are 13"x19" canvas prints with a 2” x 2” frame forsturdiness, and wood backing behind print to insure no punctures.
Shipping Materials: The canvas will be inserted in a large plastic bag for protection against scratches and liquids. Then, inserted in a large cardboard box, with padding on all sides to prevent scratching.
If you have any questions e-mail us at email@example.com
Support this project
- (30 days)