Funded! This project was successfully funded on March 6, 2013.

Loading small
Please wait
130
Backers
£7,952
pledged of £5,000 goal
0
seconds to go
  • You selected
    Pledge £1 or more

    4 backers

    A big thank you and your name in lights, well not lights per se, but in a listing on the project page on our website. And of course the warm fuzzy glow that you made something happen.

    Estimated delivery:
  • You selected
    Pledge £3 or more

    4 backers

    One of our slightly cheeky "I helped scan a steam train with lasers. What did you do?" button badges. And of course your name on the project supporters page.

    Estimated delivery:
    Add £1 to ship outside the UK
  • You selected
    Pledge £5 or more

    6 backers Limited (244 left of 250)

    Set of five button badges, one for each of the four engines showing a visualisation of the laser scan point cloud and the last one is one of our cheeky "I helped scan a steam train with lasers. What did you do?" button badges. And don't worry, your name will be on the project supporters page.

    Estimated delivery:
    Add £2 to ship outside the UK
  • You selected
    Pledge £5 or more

    6 backers

    A set of four postcards, one for each of the engines, You can select from a set showing either visualisations of the laser scan point clouds or alternatively high resolution photographs. And of course, a credit on the project page.

    Estimated delivery:
    Add £2 to ship outside the UK
  • You selected
    Pledge £10 or more

    7 backers

    A newspaper full of plans in different scales. We know not everyone will want to make one of our kits, especially as you may have one from another manufacturer in the cupboard. Accurate plans are golden though. One of the things which come out of the laser scanning is a really accurate set of plans. We're going to make them available in a newspaper, printed by our friends at Newspaper Club, where each engine gets four pages, with plans in 4mm, 7mm and 16mm scale. Oh, and did we mention, there'll be a credit for you on the project page.

    Estimated delivery:
    Add £3 to ship outside the UK
  • You selected
    Pledge £15 or more

    3 backers

    A set of twelve postcards, three for each of the engines featuring high resolution photography and point clouds. And let's not forget that credit on the project page.

    Estimated delivery:
    Add £3 to ship outside the UK
  • You selected
    Pledge £20 or more

    20 backers Limited (230 left of 250)

    Full colour t-shirt of the point cloud data for your favourite of the four locomotives. These lovely t-shirt designs will be printed on high quality black t-shirts. Not only will you get a lovely t-shirt but your name will also of course be on our list on the project page.

    Estimated delivery:
    Add £5 to ship outside the UK
  • You selected
    Pledge £25 or more

    28 backers

    40 page full colour book of plans, pictures and details of the four locomotives. These softback books measure 10×8 inches. You will be credited both on the project page and in the acknowledgements in the book (although if you wish you can be anonymous).

    Estimated delivery:
    Add £5 to ship outside the UK
  • You selected
    Pledge £30 or more

    5 backers All gone!

    A 3D printed 2mm to the foot (Nn3) body kit for one of the four engines (your choice) and its tender. The kit will be largely in one piece due to the constraints of 2mm scale and will be produced in a fine detail resin. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page and on the instruction leaflet for all subsequently sold 2mm scale kits.

    Estimated delivery:
    Add £5 to ship outside the UK
  • You selected
    Pledge £35 or more

    8 backers Limited (17 left of 25)

    A 3D printed 2mm to the foot (Nn3) body kit for one of the four engines (your choice) and its tender. The kit will be largely in one piece due to the constraints of 2mm scale and will be produced in a fine detail resin. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page.

    Estimated delivery:
    Add £5 to ship outside the UK
  • You selected
    Pledge £45 or more

    5 backers All gone!

    A 3D printed TT body kit for one of the four engines (your choice) and its tender. You can choose either 1:120 scale or 3mm to the foot. The kit will be largely in one piece due to the constraints of 3mm scale and will be produced in a fine detail resin. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page and on the instruction leaflet for all subsequently sold TT scale kits.

    Estimated delivery:
    Add £5 to ship outside the UK
  • You selected
    Pledge £50 or more

    0 backers Limited (3 left of 3)

    A gorgeous 29cm x 29cm Giclée print of Princess. Inkjet printed using fade-resistant, archival inks and very high art quality paper (unframed).

    Estimated delivery:
    Add £20 to ship outside the UK
  • You selected
    Pledge £50 or more

    0 backers Limited (3 left of 3)

    A gorgeous 29cm x 29cm Giclée print of Prince. Inkjet printed using fade-resistant, archival inks and very high art quality paper (unframed).

    Estimated delivery:
    Add £20 to ship outside the UK
  • You selected
    Pledge £50 or more

    0 backers Limited (3 left of 3)

    A gorgeous 29cm x 29cm Giclée print of Palmerston. Inkjet printed using fade-resistant, archival inks and very high art quality paper (unframed).

    Estimated delivery:
    Add £20 to ship outside the UK
  • You selected
    Pledge £50 or more

    1 backer Limited (24 left of 25)

    A 3D printed TT body kit for one of the four engines (your choice) and its tender. You can choose either 1:120 scale or 3mm to the foot. The kit will be largely in one piece due to the constraints of 3mm scale and will be produced in a fine detail resin. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page.

    Estimated delivery:
    Add £5 to ship outside the UK
  • You selected
    Pledge £50 or more

    0 backers Limited (3 left of 3)

    A gorgeous 29cm x 29cm Giclée print of Welsh Pony. Inkjet printed using fade-resistant, archival inks and very high art quality paper (unframed).

    Estimated delivery:
    Add £20 to ship outside the UK
  • You selected
    Pledge £55 or more

    5 backers All gone!

    A 3D printed 4mm to the foot (OO9) body kit for one of the four engines (your choice) and its tender. The kit will consist of some parts for you to assemble and will be produced in a fine detail resin with some structural supports in a white plastic. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page and on the instruction leaflet for all subsequently sold 4mm scale kits.

    Estimated delivery:
    Add £5 to ship outside the UK
  • You selected
    Pledge £60 or more

    8 backers Limited (17 left of 25)

    A 3D printed 4mm to the foot (OO9) body kit for one of the four engines (your choice) and its tender. The kit will consist of some parts for you to assemble and will be produced in a fine detail resin with some structural supports in a white plastic. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page.

    Estimated delivery:
    Add £5 to ship outside the UK
  • You selected
    Pledge £70 or more

    0 backers Limited (5 left of 5)

    A 3D printed 5.5mm to the foot scale body kit for one of the four engines (your choice) and its tender. The kit will consist of some parts for you to assemble and will be produced in a fine detail resin with some structural supports in a white plastic. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page and on the instruction leaflet for all subsequently sold 5.5mm scale kits.

    Estimated delivery:
    Add £7 to ship outside the UK
  • You selected
    Pledge £85 or more

    5 backers All gone!

    A 3D printed 7mm to the foot (O16.5 or O14) body kit for one of the four engines (your choice) and its tender. The kit will consist of some parts for you to assemble and will be produced in a fine detail resin with some structural supports in a white plastic. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page and on the instruction leaflet for all subsequently sold 7mm scale kits. A chassis kit will be available for purchase later in 2013.

    Estimated delivery:
    Add £9 to ship outside the UK
  • You selected
    Pledge £90 or more

    0 backers Limited (10 left of 10)

    A set of four gorgeous 29cm x 29cm Giclée prints of the locomotives. Inkjet printed using fade-resistant, archival inks and very high art quality paper (unframed).

    Estimated delivery:
    Add £50 to ship outside the UK
  • You selected
    Pledge £90 or more

    4 backers Limited (21 left of 25)

    A 3D printed 7mm to the foot (O16.5 or O14) body kit for one of the four engines (your choice) and its tender. The kit will consist of some parts for you to assemble and will be produced in a fine detail resin with some structural supports in a white plastic. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page. A chassis kit will be available for purchase later in 2013.

    Estimated delivery:
    Add £9 to ship outside the UK
  • You selected
    Pledge £95 or more

    0 backers Limited (5 left of 5)

    A gorgeous 49cm x 69cm Giclée print of a locomotive of your choice. Inkjet printed using fade-resistant, archival inks and very high art quality paper (unframed).

    Estimated delivery:
    Add £45 to ship outside the UK
  • You selected
    Pledge £100 or more

    4 backers Limited (6 left of 10)

    A larger (13×11 inches) hardback limited edition version of the book of plans, pictures and details of the four locomotives. You will be credited both on the project page and in the acknowledgements in the book (although if you wish you can be anonymous). Printed on beautiful photo paper there will only ever be 10 of these books for sale.

    Estimated delivery:
    Add £10 to ship outside the UK
  • You selected
    Pledge £140 or more

    0 backers Limited (5 left of 5)

    A set of 3D printed 2mm to the foot (Nn3) body kits of the four engines. The kits will be largely in one piece due to the constraints of 2mm scale and will be produced in a fine detail resin. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page.

    Estimated delivery:
    Add £15 to ship outside the UK
  • You selected
    Pledge £140 or more

    1 backer Limited (4 left of 5)

    A 3D printed 9mm or 9.5mm (your choice) to the foot body kit for one of the four engines (your choice) and its tender. The kit will consist of some parts for you to assemble and will be produced in a fine detail resin with some structural elements and supports in a white plastic. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page and on the instruction leaflet for all subsequently sold 9mm or 9.5mm scale kits. A chassis kit will be available for purchase later in 2013.

    Estimated delivery:
    Add £10 to ship outside the UK
  • You selected
    Pledge £200 or more

    1 backer Limited (4 left of 5)

    A set of 3D printed TT scale body kits of the four engines. The kits will be largely in one piece due to the constraints of 3mm scale and will be produced in a fine detail resin. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page.

    Estimated delivery:
    Add £15 to ship outside the UK
  • You selected
    Pledge £200 or more

    0 backers Limited (2 left of 2)

    A set of four gorgeous 29cm x 29cm Giclée prints of the locomotives. Inkjet printed using fade-resistant, archival inks and very high art quality paper (unframed).

    Estimated delivery:
    Add £75 to ship outside the UK
  • You selected
    Pledge £240 or more

    0 backers Limited (5 left of 5)

    A set of 3D printed 4mm to the foot (OO9) scale body kits of the four engines. The kit will consist of some parts for you to assemble and will be produced in a fine detail resin with some structural supports in a white plastic. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page.

    Estimated delivery:
    Add £15 to ship outside the UK
  • You selected
    Pledge £275 or more

    1 backer Limited (4 left of 5)

    A 3D printed 16mm to the foot body kit for one of the four engines (your choice) and its tender. The kit will consist of some parts for you to assemble and will be produced in a fine detail resin with some structural elements in a white plastic. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page and on the instruction leaflet for all subsequently sold 16mm scale kits. A chassis kit will be available for purchase later in 2013.

    Estimated delivery:
    Add £25 to ship outside the UK
  • You selected
    Pledge £360 or more

    0 backers Limited (5 left of 5)

    A set of 3D printed 7mm to the foot (O16.5 or O14) scale body kits of the four engines. The kit will consist of some parts for you to assemble and will be produced in a fine detail resin with some structural supports in a white plastic. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page.

    Estimated delivery:
    Add £25 to ship outside the UK
  • You selected
    Pledge £500 or more

    0 backers Limited (1 left of 1)

    A unique 50xm x 40cm Art-Lite lightbox with a backlit point cloud image. There will only ever be one of these sold and you can choose the locomotive and the image. The light box will be professionally created by Metro Imaging and contains a Duratran print.

    Estimated delivery:
    Add £100 to ship outside the UK
  • You selected
    Pledge £1,000 or more

    0 backers Limited (1 left of 1)

    A fully working, unique (with a certificate of authenticity and uniqueness) model of Prince in a scale of your choice between 4mm and 16mm. We'll build the model for you and have it professionally lined. There will only ever be one of these and obviously your name will be on our supporters page.

    Estimated delivery:
    Add £50 to ship outside the UK
  • You selected
    Pledge £1,000 or more

    1 backer All gone!

    Something very special, totally unique and tailored just for you. You choose the scale, between 4mm and 16mm scale, and which of the four engines you'd like, and we will build the locomotive for you and have it professionally lined. To make it extra special we will custom produce a driver figure of you. Yes, that's right, we'll scan you (it doesn't hurt, it's like having a lot of photographs taken all at once) wearing a driver's uniform and then print a figure of you to go on the footplate. Since we'll need to scan you this is available to people in the UK only. There may be some travel involved for you to get to the nearest place where we can scan you, but we'll work all that out closer to the time.

    Estimated delivery:
    Ships within the UK only
  • You selected
    Pledge £1,000 or more

    0 backers Limited (1 left of 1)

    A fully working, unique (with a certificate of authenticity and uniqueness) model of Welsh Pony in a scale of your choice between 4mm and 16mm. We'll build the model for you and have it professionally lined. There will only ever be one of these and obviously your name will be on our supporters page.

    Estimated delivery:
    Add £50 to ship outside the UK
  • You selected
    Pledge £1,000 or more

    1 backer All gone!

    A fully working, unique (with a certificate of authenticity and uniqueness) model of Princess in a scale of your choice between 4mm and 16mm. We'll build the model for you and have it professionally lined. There will only ever be one of these and obviously your name will be on our supporters page.

    Estimated delivery:
    Add £50 to ship outside the UK
  • You selected
    Pledge £1,100 or more

    0 backers Limited (3 left of 3)

    A set of 3D printed 16mm to the foot scale body kits of the four engines. The kit will consist of some parts for you to assemble and will be produced in a fine detail resin with some structural supports in a white plastic. Handrail knobs, etched brass overlays and brass wire will be provided for those who wish to add them. Obviously you'll be thanked on our supporters page.

    Estimated delivery:
    Add £100 to ship outside the UK
Funding period

- (30 days)