Share this project

Done

Share this project

Done
Funding the production of a new set of tools so you can create your own set of low cost, professional looking dungeon tiles.
Funding the production of a new set of tools so you can create your own set of low cost, professional looking dungeon tiles.
192 backers pledged $16,185 to help bring this project to life.

Victory on the Horizon

4 likes
Hello Team,

 Long=Short: New moulds are just right and the fitting issue is solved. Address lockdown will be Monday April 27th. Shipping will begin the first week of May, with all shipping out before Mid-May.

We are near complete victory! The issue with our last component, the plugs, has been solved. This week we received the new master moulds and tested them, the plugs that came out were just the right fit, not too tight and not too loose. This week we will move on production of those plugs and will be locking down addresses on Monday, so if you need to double check your address please do so quickly. Then we will move into shipping the first week of May. We will still be wrapping up production of the plugs while we start shipping, but we do want to get a good number of the plugs made so we do not have to take a pause in the middle. There will be one last update during shipping to update you on progress. After that we would like to do a closing update sometime mid-summer devoted to all of you, with pictures of what you have created using Your Board, so be ready to create, the best/most out of the box will have featured photos!  

On a side note I will be attending ReaperCon at the end of the month, only as an attendee, so I will not be able to do any sales or major promoting. However, if you spot me in my Happy Seppuku shirt, please feel free to stop me, it is always great to meet those that have been using our stamps and other products.  

Thanks,  

Stephen 

Eric B., Robyn Nixon, and 2 more people like this update.

Comments

Only backers can post comments. Log In
    1. Happy Seppuku Model Works 4-time creator on April 26, 2015

      TSA, I'm not too worried about, I will get bag checked anyway. Anytime I have stamps with me, rubber blocks like ours usually send up a red flag in the X-ray machine.

    2. Robyn Nixon
      Superbacker
      on April 26, 2015

      Finding clay at reaper on should be like finding Mickey Mouse at Disneyland. But I would not want to be you trying to Carr clay through the TSA screening at the airport. �

    3. Happy Seppuku Model Works 4-time creator on April 25, 2015

      @ Bryan, I can more than likely sneak one into my carry on. At least if people ask I can show them how it locks together, carrying clay around doing full on demos would be a bit much though. I know sometimes the impact of something new like this doesn't hit until you have held it in your hands.

    4. Robyn Nixon
      Superbacker
      on April 25, 2015

      Fantastic!! I am really excited to get these in hand.

    5. Bryan Stiltz on April 25, 2015

      Exciting! Will you have prototypes at ReaperCon? I'll be there, too (working)