sw1tch.me Ena (Canceled)
sw1tch.me Ena (Canceled)
Wifi enabled round smart motion detecting light switch, alarm and many more, with expandable features and OTA firmware updates!
Wifi enabled round smart motion detecting light switch, alarm and many more, with expandable features and OTA firmware updates! Read more
We have decided to go Open Source with our Software/Firmware. Every unit that will be produced will not only be updatable via OTA but feature Tx and Rx Pins in order for custom firmware to be flashed on the device!
- Round shape We like thinking out of the box...
- Material Aluminium & Glass
- Changeable facteplates Many colors to choose from
- Designed in Switzerland
- Easy use & setup WPS Enabled, Web, iOS and Android app
- Feature packed
- Proximity and touch function
- Come Home and Leave Home feature
- Motion detecting light switch
- Motion detecting alarm system
- Baby Monitor
- AmIHomeOrNot feature
- Over The Air firmware updatable New features with OTA updates
- Expansion pins Addon sensors to expand functionality
Online demo page
We have set up a small online demo page where you can play with our lights :) Follow this link: https://www.sw1tch.me/demo
Proximity and Touch enabled
sw1tch.me Ena reacts to your hand be detecting its presence in a short radius around the device. You can either touch it or wave your hand very close to it to toggle the lights.
Come Home & Leave home feature
When you have our app installed on your phone, it detects when you connect to your home's wifi network and switches the lights on. This feature can be selected or disabled for every sw1tch.me device with just a press of a button on our app.
Motion detecting lights
Saving energy is very important those days. With the Motion feature, your device becomes a motion detecting light switch. When you enter the room, the sensor detects your presence and turns the lights on for how long you have set it up on our app. After that time, the lights switch off automatically.
Motion detecting alarm and baby monitor
The motion sensor inside the device can also be used as an alarm. Set it in alarm mode from inside our app and it will notify you with a push message when motion is detected in your home. To scare the unwanted intruder off, it will also switch the lights on.
The detecting moiton feature of sw1tch.me Ena lets your device act as a baby monitor. Like the alarm feature it detects movement and send a push message, this time without switching the light on.
Control, configure all your devices with our app. Everything at your fingertips!
- Easy login with Social Media: Email, Google, Twitter, Facebook
- Control unlimited devices
- All basic functions on one screen
- Controll all devices at once
- Enable ComeHome & Leave home for specific devices
- Receive push notification on alarm and baby monitor mode
- and many more to come..
Having an alarm that switches the lights on and informs you about intruders is very cool. But it would be better not to go through this process. With the AmIHomeOrNot feature, your lights switch on and off at random times, in order to give the impression of you beeing home.
We have made sure that your smart device is OTA updatable. Now that might not sound as something special, we also left room for 2 aditional sensor packs that can be added later. There are 4 pins for one i2c sensor, and 3 pins for an digital sensor. These pins can also be used to switch leds on and off. The possibilities are endles.
sw1tch.me Ena is WPS enabled so getting started is very easy. After installing, just press the WPS button on your router and the device, pop the facteplate on and you are ready to go. You dont have to enter your wifi password to connect to your network.
sw1tch.me Ena remembers the last state it was in, whether it was switched On or Off, in alarm mode or any other mode. After a power outage, the device will bring itself to the same state it was before.
Krack Attack safe
sw1tch.me devices are patched to prevent anouthorised access due to the WiFI Krack Attack vulnerability.
Every home is defferent, and sticking to just one colour isn't enough. sw1tch.me Ena comes in three different colours, with red and blue glass coming soon. Faceplates can also be bought seperately once the project is funded. Watch out for our special editions!
sw1tch.me Ena replaces your regular light switches. It is designed vor a 70 x 70 frame, like the one seen below. However, the bracket is not needed, it can also be screwed directly to the wall without the bracket.
* Final design subject to change
sw1tch.me needs Hot, Neutral and Ground to operate and a Line cable to switch the lights.
Power: 90 - 260 VAC, 10A
- Diameter of visible part: 90mm
- Aluminium frame depth 7mm
- Glass depth from 3-4 mm defending on colour
Risks and challenges
Although we have completed our working prototype, additional funding is necessary to be able to hire more staff and to give the end users a stable "environment" that is evolving. When the time comes, we have to be ready so that production and shipping goes smooth. We have a lot of ideas and energy but sometimes it takes more people to do great things.
Certification of electronic products does not come cheap and we must ensure that our products meet all of the industry’s requirements.
Certification of electronic products doesnt come cheap and we must ensure that our products meet all of the industries requirements.Learn about accountability on Kickstarter
- (45 days)