$482
pledged of $2,500pledged of $2,500 goal
6
backers
18days to go

All or nothing. This project will only be funded if it reaches its goal by Sun, September 8 2019 2:00 PM UTC +00:00.

$482
pledged of $2,500pledged of $2,500 goal
6
backers
18days to go

All or nothing. This project will only be funded if it reaches its goal by Sun, September 8 2019 2:00 PM UTC +00:00.

About


This campaign created by Snake Eyes Gaming gives you access to various 3D .stl files for you to print on your own printer through the pledges we are offering. All pieces are originals  designed by our technicians at the Snake Eyes Gaming lab. Well, one technician, and probably not a "lab." Anyways, our designer is remarkably talented. 

Through modularity and alternate pieces these models will become a must for your tabletop  as they fit a wide variety of themes. Originally designed for 28-32mm scale board/wargames, most of the models can be also scaled down, or up, to match your needs; the detail scales beautifully. Suitable for Sci-Fi, Fantasy, or historical warfare, such as Warhammer 40K, Star wars themed games, Bolt Action, Dust, and much more. 

This campaign takes you to the fantasy realm of Fel'Haven. The files included will allow you to experience the rocky landscape, ruined stone architecture of eras long past, swampy pools overflowing with toxic liquids, and craters blasted into the earth from hard fought battles. 

Pictured below are the core models that are included in this campaign. The majority of these images are of completed, fully printed and painted models. 

 THE RUINS 

ruin with arch attached - printed and painted
ruin with arch attached - printed and painted
arch ruin with arch detached - printed and painted
arch ruin with arch detached - printed and painted
ruin #1 - digital render
ruin #1 - digital render
ruin #1 - printed, painted and based
ruin #1 - printed, painted and based
ruin #1 different lighting - printed, painted and based
ruin #1 different lighting - printed, painted and based
ruin #2 front view - digital render
ruin #2 front view - digital render
ruin #2 back view - digital render
ruin #2 back view - digital render



ROCKY OUTCROPS

outcrop #1 - printed, painted and based
outcrop #1 - printed, painted and based
outcrop #2 left view - printed, painted and based
outcrop #2 left view - printed, painted and based
outcrop #2 right view - printed, painted and based
outcrop #2 right view - printed, painted and based
outcrop #2 front view - printed, painted and based
outcrop #2 front view - printed, painted and based
outcrop #3 - printed, painted and based
outcrop #3 - printed, painted and based
outcrop #4 front view - printed and painted
outcrop #4 front view - printed and painted
outcrop #4 side view - printed and painted
outcrop #4 side view - printed and painted

TOXIC POOLS

2 toxic pools - printed, painted, and filled with realistic water
2 toxic pools - printed, painted, and filled with realistic water
the toxic pools with different lighting
the toxic pools with different lighting

CRATERS

4 blast craters - printed, painted and based
4 blast craters - printed, painted and based
rocky "moon" craters - digital render
rocky "moon" craters - digital render
3 rocky "moon" craters - printed and painted
3 rocky "moon" craters - printed and painted

SCATTER TERRAIN

5 scatter ruin pieces - printed and mostly painted
5 scatter ruin pieces - printed and mostly painted
5 scatter rocks - printed, painted and based
5 scatter rocks - printed, painted and based


a small skirmish with various finished terrain pieces
a small skirmish with various finished terrain pieces
close-up view of a rocky outcrop
close-up view of a rocky outcrop
toxic pool complete with nasty contents (realistic water)
toxic pool complete with nasty contents (realistic water)
rocky "moon" crater with a Space Wolf Rhino for scale
rocky "moon" crater with a Space Wolf Rhino for scale
couple of miniatures fighting it out on the arch ruin
couple of miniatures fighting it out on the arch ruin
rocky outcrop occupied by some Space Wolves
rocky outcrop occupied by some Space Wolves
close-up of one of the ruins
close-up of one of the ruins
the toxic pools are water tight so that you can fill them with muck
the toxic pools are water tight so that you can fill them with muck
just some miniatures camping on another rocky outcrop
just some miniatures camping on another rocky outcrop
same piece from the front
same piece from the front

As more backers join, bonus items and additional terrain pieces will become available. These stretch rewards will be added to the $65 All-In reward.

Share this campaign on Facebook, Twitter, or on your blog site, etc. to help us spread the word and unlock more extras! 

About Me

 My name is Nicholas Smith, and I am the "mastermind" behind the designs that are brought to you through my design company (Snake Eyes Gaming, LLC). Although this is essentially my first Kickstarter, I intend to bring y'all many more designs in the future. My love for the design of 3D models has grown out of my passion for tabletop gaming, and 3D printing. 

Because I am a tabletop gamer myself and greatly care about the quality of the product that I place on my table, I personally test print each model before I release it to you. You will never get a model from me that I haven't guaranteed will print on my own 3D FMD. At every turn I try to take ease of printability and paintability into consideration, and will try to remove support requirements where able. 

Delivery Time

You hate waiting. You've been burned by broken promises and failed delivery timelines in previous Kickstarter campaigns. I've been there too. In an effort to provide the best campaign possible, I didn't even consider launching this project until I had all of the files nearly COMPLETED AND TEST PRINTED. Everything offered in the All-In pledge (and many of the stretch goals) are ready for delivery the second the funds clear after the Kickstarter finishes. Any stretch goals that are still being designed, will be finalized and released as soon as possible; but still within the delivery deadline.  All parts will be repaired, tested, and ready for you to drop right into your slicer, error-free.

Disclaimer & Printing Requirements

To get the most out of the printable parts from this Kickstarter, you will need to have a well-tuned 3D printer. For terrain/scatter you should at least possess a FDM printer that is capable of printing at a minimum 0.2mm layer height (such as an Ender 3). In the few cases where supports are needed, you can generate them with your slicer and they should work great. Parts are cut to small pieces to facilitate printing. All designs for terrain are cut to fit on a 200mm x 200mm print bed.  

Every part is test printed by myself and repaired to be manifold and ready to drop on your slicer - however, In the event that any issues with the files get past my own product testing and process, and my other test printers, I will make every effort to fix the file and remedy the situation as soon as possible. I will use Dropbox or Google Drive for file delivery so I can push updates/fixes. My number one goal is to make some incredible designs that will greatly enhance your tabletop!

 Terms of Use

Some legal info that I need to share about our files before you decide to back: Snake Eyes Gaming owns all images, files, logos and documents that you may download from  this Kickstarter project page. You are purchasing a license to print our files, and use our documents for non-commercial use only. You may not sell, share or distribute any of our digital files. You may modify the files for personal use only and not create any derivative works that are to be used in a commercial manner. You may not sell the printed items unless agreed to and licensed directly from Snake Eyes Gaming, LLC. 

Risks and challenges

Backing someone with no Kickstarters under their belt can certainly make one hesitant to pull the trigger on any project.

However, there are no real risks for 3D files that are ready. Many of the elements of this project are already tested and designed and because of this, we don't see any reason for delay. If anything comes up we will let you know and tell you how we will handle and solve it.

In short, we've tried to cover all of our bases before launching the Kickstarter and feel the risk to you as our backer has been minimized. We hope to make this the first in a long line of products to keep your tabletop looking fantastic for years to come.

Learn about accountability on Kickstarter
Questions about this project? Check out the FAQ

Support

  1. Make a pledge without a reward

    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge $1 or more About $1.00

    I'm listening...

    Select this reward level if you would like to support this campaign. You'll also receive regular updates and backer-exclusive updates on the project's progress. You can update to a higher level anytime. Thank you for joining!

    Less
    Estimated delivery
    1 backer
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge $15 or more About $15

    Bombs Away!

    Just give me the craters, man! This pledge level includes the following .stl files:
    - 3 rocky craters
    - 4 blast craters

    This pledge level does not include any unlocked stretch goals.

    Less
    Estimated delivery
    0 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge $20 or more About $20

    I'm Ruined!

    You're just interested in the ruins. That's fine. This Pledge level includes the following .stl files:
    - 2 large ruins
    - 5 scatter ruins
    - Large ruin with arch

    This pledge level does not include any unlocked stretch goals.

    Less
    Estimated delivery
    1 backer
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge $50 or more About $50

    All-In!

    I want it all! Gimme, gimme, gimme. This pledge level includes the following .stl files:
    - 3 rocky "moon" craters
    - 4 blast craters
    - 2 large ruins
    - large ruin with arch
    - 5 scatter ruins
    - 5 scatter rocks
    - 2 "toxic" pools
    - 4 rocky outcrops

    That's a total of 26 files! This pledge level also includes all stretch goals unlocked during the campaign. That's possibly over 40 files!

    Less
    Estimated delivery
    2 backers
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge $360 or more About $360

    An offer you can't refuse...

    You get all of the files from the All-In pledge and all unlocked stretch goals. In addition, you’ll get the rights to sell your printed models in your shop, this reward level will grant you a license for a period of one year from the date that the files are delivered.

    Your rewards will be delivered in downloadable .stl file format for your 3D printer.

    Less
    Estimated delivery
    1 backer
    $

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.