Make a nice espresso with any of Nespresso OriginalLine capsules or our original concept of Reusable "Smart Capsule".
How to make espresso with Nespresso Capsule:
1) Put the "Nespresso capsule lid" into the capsule holder.
2) Put the Nespresso OriginalLine capsule into the capsule holder.
3) Screw the capsule holder to the heat insulated water tank.
4) Pour hot water into water tank and close it.
5) Start to make espresso by lifting/pressing the handle.
How to make espresso with Simpresso "Smart Capsule":
1) Fill the smart capsule with ground coffee, apply slight pressure to level the grind.
2) Cover it for making espresso later
3) Take away the cover and put smart capsule into the capsule holder. (Make sure the Nespresso lid is not in the capsule holder.)
4) Screw the capsule holder to the heat insulated water tank.
5) Pour hot water into water tank and close it.
6) Start to make espresso by lifting/pressing the handle.
-Compatible with Nespresso OriginalLine Capsules.
-Simple to use and clean.
-Mechanical operated piston is linked to a leverage input handle, which requires little effort on each extraction.
-Simpresso generates pressure from 15 to 19 bars (217 to 275 PSI).
-Product size is 6.5 x 6.5 x 20.5 cm ( 2.5 x 2.5 x 8 inches). Product weight is 346g (0.76 Lb). A compact and portable size for putting into backpacks, suitcases, daily bags, etc..
-One transparent water tank size fillable to 120ml volume with water level marks for ristretto (25ml), espresso (40ml) to lungo (110ml).
-Double-wall heat insulated transparent water tank to see how much hot water is in the tank and to keep the hands safe from any burns when holding it.
-With a nice transparent espresso cup included in the setup.
-All parts contacting hot water will use PCTG materials. It is a 100% BPA free material and food contact safe material. Health and safety are extremely important.
-Eco friendly product with easy cleaning, reusable capsule. Reusable capsule design helps you keep the preparation process clean and tidy.
STRETCH GOALS REWARDS
We believe all pledgers here will help us to spread out our nice concept/idea and share with their friends or social media. All these efforts from pledgers will be rewarded when we meet our stretch goals.
Simpresso is 100% ready for mold making if the campaign is successfully funded. The prototype had been checked and tested hundred times already. 3D computer modeling had been checked and planned for mold making. Materials of each part had been selected and confirmed by our team. Lead time of the mold making is 45 days, we may need 2-3 weeks for parts fitting and mold polishing afterward. We will start mass production after the pre-production samples are tested and approved by our team.
Simposh, Inc. is an experienced Kitchenware manufacturer/exporter/importer based in the United States. We have long lasting relationships with established, high quality suppliers in Asia, which manufacture high quality kitchenware for US, Canada, Europe, Japan, Australia and many other markets. We have worked closely with our suppliers and manufacturers for years, and built up a trustful partnership with them. All materials used in our products, from plastic to stainless steel materials, are chosen carefully to ensure we design and produce high quality and safe consumer products.
-Our prices do not include shipping cost.
-Our prices do not include VAT, GST or other applicable country taxes. Pledgers are responsible for any and all import fees, VAT, duties, taxes, post office fees, and or any other fees their country or government imposes. It is hard for us to check the various duties, VAT and GST tax for each location through Kickstarter.
- Shipments that could not be delivered due to an inaccurately provided address (including failure to update an old address) will have additional costs to be reshipped.
- Due to the size of your rewards, we cannot ship to PO Boxes.
Thank you so much for your support, and we're excited you're along for the journey!
Risks and challenges
Unlike most Kickstarter projects, we've been working on Simpresso for years prior to this campaign launch. Our R&D team has solved all problems and challenges we found on more than 10 designs we had made, and we trust the final design of the Simpresso is the best portable espresso maker in the market.
With our experience in manufacturing and shipping, we are confident to say the Simpresso project will go smooth and deliver to all pledgers with a high quality standard.
We will keep all pledgers updated on the project from 1st shot testing samples to final mass production, and food contact safe test (FDA for US and LFGB for EU) result, BPA free test result and all information about the project.
- (30 days)