Share this project

Done

Share this project

Done
The Wargaming Terrain Collection - STL Files for 3D Printing project video thumbnail
Replay with sound
Play with
sound
$2,322 pledged of $2,000 goal
backers
Back this project
Share
Share

All or nothing. This project will only be funded if it reaches its goal by .

By SimplePolytrix LLC
$2,322 pledged of $2,000 goal
backers
Back this project
Share
Share

All or nothing. This project will only be funded if it reaches its goal by .

About this project

About this project

SimplePolytrix has put together over 20 gorgeous 3D models available for you to download and print on your home 3D printer or printing service. These unique, highly detailed terrain pieces fit any sci fi table top scenario from strategic war gaming to role playing games. Each model is handcrafted using today's standards in 3D building software. Assurance of quality through prototype printing was done to finalize the project.

Today you can begin building your library or increase your collection of digital models for all your gaming needs as much as you wish. The purpose of this project is to allow SimplePolytrix to continue delivering quality terrain models for all genres of gaming from fantasy to modern to historical and more. 

 Through gracious backers, more efficient and lower cost prototype testing may be done to keep the cost at a minimum for the consumer. Better materials can be purchased, and a realization of creating resin casts production can be met. It is the company's ultimate goal to be able to provide both digital downloads and physical prints so anyone can enjoy enhancing their battlefield with Simplepolytrix Terrain.

We hope you're as excited about this kickstarter as we are!  Please spread the word by sharing this on your Facebook, Twitter, and other social media outlets so we can reach that goal!  Thank you!

SimplePolytrix Collection Contents  

Here are all the models you will receive if you pledge at the SimplePolytrix Collection level:

SimplePolytrix Collection
SimplePolytrix Collection

 

Barricade
Barricade

 

Single-Unit Bunker
Single-Unit Bunker

 

Cathedral Ruins
Cathedral Ruins

 

Crash
Crash

 

Fencing
Fencing

 

Fountain Pump
Fountain Pump

 

Garage
Garage

 

Lookout Tower
Lookout Tower

 

Objective Markers
Objective Markers

 

Oil Tank
Oil Tank

 

Oil Tankers
Oil Tankers

 

Platform
Platform

 

Power Facility
Power Facility

 

Power Station
Power Station

 

Power Tower
Power Tower

 

Ground Radar
Ground Radar

 

Ruins
Ruins

 

Sphere Tanks
Sphere Tanks

 

Tank Turret
Tank Turret

 

Trench
Trench

 

                       

The first Stretch Goal has been revealed!  City Streets is a modular kit collection featuring 7 pieces that can be reprinted for an entire urban environment!  This project will unlock if the project reaches $2,500.  It was originally set to $3,000, but we felt it is most important to get these pieces to the backers as easily as possible.  It's more about seeing that these models are enjoyed by you.  This will be included in the SimplePolytrix Collection pledge level.

 City Streets - Unlocked at $2,500

 

Interior Facility - Unlocked at $3,500

The Interior Facility modular kit comprises of 26 total pieces that can be fitted to nearly an infinite number of layouts to suit your interior gaming needs.  Flooring, half walls, and doors make up this elaborate set.  This second Stretch Goal will be unlocked if the project reaches $3,500. We felt the most important thing is to get the models into the backer's hands, so this goal has been lowered.  This will be included in the SimplePolytrix Collection.

 

 Behind the scenes

 A lot of wonderful people have requested to see some printed versions of the above models.  While several of them can be viewed at SimplePolytrx's Facebook page (https://www.facebook.com/SimplePolytrix/), for those who aren't using Facebook, here are a few sample viewings.

   

 

Here are a few renderings of how the models will print.  Because of their sizes, design, or complexity, they must be arranged in such a way to be optimized for printing and reduce excessive supports and unnecessary clean up.

Cathedral Ruins
Cathedral Ruins

The odd flat piece with 2 extensions in the above photo is the suspending platform that is on the backside.  The extensions perfectly rest on the tops of the walls.

Tank Turret
Tank Turret

The tank turret can be used without the platform base for more freedom on placement on the playing field.  What is unique is that the main body of the turret allows for the top portion to rest on and swivel if you leave the two pieces unglued so that aiming can be physically done.

Oil Tankers
Oil Tankers

These 3 oil tanks are joined by the piping system.  Holes in the tank units allow for the pipes to fit inside and can be reinforced with a little glue.

Fencing
Fencing

The fence seems simple, but it must be laid down in this manner so the diamond pattern prints cleanly without major supports.  The poles have slits along the sides for easier joining of the chain link portion.  Once those are glued and dried, they slide right into the pre-cut holes in the base.

Need help pledging?

Thank you in advance for your consideration to back this project! To pledge, either click the green banner that reads “Back this project” or look on the right side of this page toward the top for a list of different pledge levels. Click on the one you wish for. Click “Pledge” and you're done! You may have to follow the directions following for providing payment type.

 

 

Risks and challenges

Just to prevent any confusion, when you pledge any level, you will receive at the end of the campaign (30 days) digital files (STL files) and not physical models. This is the universal file format every printer accepts (with the exception of older versions of Makerbot printers, which can be provided if requested). They will print as a single color. They do not print out painted like the examples shown.

This is SimplePolytrix's first Kickstarter, but we have gone above and beyond to assure it's right the first time. With 3D printing, there are variables too many to mention that may affect the quality of the print. Depending on your printer, the settings of your printer, and the type of printing material, your model may vary from the photos above as well as your friends who may print them as well. I value excellent communication, and I strive to assure your satisfaction so that after this Kickstarter has been successful, you continue to return to SimplePolytrix's store to download future models. I am always available via email at simplepolytrix@gmail.com and by messaging me on SimplePolytrix's facebook page: https://www.facebook.com/SimplePolytrix/. There are hundreds more models to come, and I sincerely hope you consider SimplePolytrix for your go-to source of table top terrain!

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support this project

  1. Make a pledge without a reward

    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge $10 or more About $10

    Just Passing Through, Lemme Grab 1 Model

    This pledge of $10 allows you to pick 1 model of your choice. Just let us know which model you want from the list of models.

    Less
    Estimated delivery
    2 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge $25 or more About $25

    On Second Thought, Lemme Grab 3 Models

    This pledge of $25 allows you to pick 3 models of your choice. Just let us know which model you want from the list of models.

    Less
    Estimated delivery
    5 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge $40 or more About $40

    SimplePolytrix Collection (Early Bird)

    This pledge level gets you all 19 models plus the 6 piece Objective Marker set. The files are STL format to be downloaded and printed on your 3D printer or through a 3D printing service.

    Only 20 backers will be able to get this collection at this incredible amount!

    Less
    Estimated delivery
    Limited (1 left of 20) 19 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge $70 or more About $70

    SimplePolytrix Collection

    This pledge level gets you all 19 models plus the 6 piece Objective Marker set. The files are STL format to be downloaded and printed on your 3D printer or through a 3D printing service.

    Less
    Estimated delivery
    19 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.