Share this project

Done

Share this project

Done
8/16 channel, bi-directional, switched bus multiplexer. Easily branch out programming cables, test devices, sensors and more.
8/16 channel, bi-directional, switched bus multiplexer. Easily branch out programming cables, test devices, sensors and more.
38 backers pledged AU$ 5,145 to help bring this project to life.

It's GUI in the Middle

Posted by SensorDots (Creator)
2 likes

The GUI has been baked a little further, with a few layout changes and feature additions added to the mix. We've put into the bowl, port state synchronisation with the boards, dual port control and saving the interface config. Hopefully things are a little easier to chew with the updated layout also.

GUI Image - Click for Animation
GUI Image - Click for Animation

 
We'll also have an update shortly with early, backer-only access to the firmware and GUI sources.

Dean Bailey and Julie Beckers like this update.

Comments

Only backers can post comments. Log In
    1. SensorDots Creator on

      Hi PM Adams,

      This is perfectly fine, although if you want save a little, you can re-back the 2x Port MuxR and tack on $40AUD for each additional adapter board. We will confirm reward preferences with backers that have put in additional amounts at the end of the campaign.

      Also if you want to save even more, you can get a single Port MuxR + Adapter and we can supply you with the additional adapter board for $40AUD.

    2. Missing avatar

      PM Adams on

      I just pledged for the Port MuxR for ARM and included money for an additional Port MuxR for AVR (since there was not an option for this). I hope this is acceptable and look forward to working with both.