Cyrus: open source 3D printer (Canceled)
Cyrus: open source 3D printer (Canceled)
Open Source 3D printer with rigid aluminum casing. Looks greats, prints amazing. Low cost and assembled in couple of hours.
Open Source 3D printer with rigid aluminum casing. Looks greats, prints amazing. Low cost and assembled in couple of hours. Read more
About this project
LAUNCHED ON 05/04/2013 , lets get going :)
Why Cyrus printer:
Cyrus closes the gap between consumers and makers. The beautiful metallic black frame blends nicely into any interior, whether it being the office or at home. When I first started on this project I wanted a printer which had a large build envelope, expandable, multiple printheads, heated bed, operate it standalone. On top of all of this, it MUST look like something I would buy in store. And I believe with Cyrus I have achieved this. The only question remains... DOES IT BLEND? not yet...but you can strap a dremel on it ;)
It’s in the name:
3D printing belongs to the world and each person should be able to have access to it. From kids to entrepreneurs who have great ideas but cannot afford prototyping. With this philosophy in mind, I turned to the first(arguable) human rights charter, “The Cyrus Cylinder”, where the basic human rights is set in clay. I believe (like many others) 3D printing will become as essential as running water. Whether it's printing toys for kids, or operating it on solar power in a desert area and repairing essential parts which are nowhere near to be found.
On a personal note, I want to thank Qasim from Statiqdesigns for making this beautiful logo and for being patient with my eternal nagging.
Although I do get some credit for creating Cyrus, it belongs to everyone and not only me. I've designed it to be as much as possible open source to diminish the dependency of spare parts on 1 sole retailer, and more important... dependency on ME...it would be madness for someone in USA to order a set of stepper drivers from me and paying the double just to cover the shipping costs!
- The Extruder will be machined, tested by the QU-BD team in the USA
- The frame is build out of the makerbeam system (Kickstarter)
- All of the screws/nuts are M3 size
- The LCD panel is created by (ReprapDiscount)
- The rods are 8mm thick steel rod
- Stepper motors are standard high torque nema 17
- Electronics is a modified RAMPS 1.4 which is open source
- All printed parts will become open source
- The XY movements are in a H-Belt configuration. There are others before me who have succesfully used the coreXY. CoreXY ,just to name one
If have left anyone out from the reprap community to be included in the list, please let me know :).
As you can see, there is NOTHING closed. All of the parts can be purchases worldwide with different reprap retailers!. Except for the casing. If some wish to build a Cyrus on their own after the kickstarter campaign, they can build the outer frame with makerbeams, and reinforce if needed with some DIY plates. Or if you got access to a CNC machine, you can machine the plates yourself.
I've chosen to provide the Cyrus as kit and assembled. All of the awards come with optional perks. You can add the LCD panel, second print head, heated bed if you want to. Or if you don't want to, just leave it out :).
After you're pledge, return to the main project page. You will now see a new button "manage your pledge" under the button "days to go". You can add the extra funds. I will be contacting each supporter.
I will start making tutorial videos the moment the Kickstarter goal is reached.
The early bird supporters get a extra discount for jumping in and supporting the project at early stage
All of the rewards are excluding shipping, each destination is different and different pricing. It would be unfair to charge someone in Italy the same shipping price as someone in Australia. Check the FAQ section to see how much the shipping will be for you and add this on top of your pledge.
Maybe you already own a 3D printer, or just supported another 3D printer project on kickstarter, You can still support the project with the T-shirt perk. You will get a cool T-shirt with the Cyrus logo on it. ( the same I wear in the video :) ) . It's simple, classy and good quality. And you will also be on the wall of fame on the website between the list of supporters.
Cyrus the Great Perk:
- You will receive Cyrus fully loaded with Dual Extruder, Heated bed and
- The Cyrus logo will be "pimped" with official swarovski gems.
- You will get the cool T-shirt displayed above.
- You will be named on the wall of fame on the website.
- You will get a early version of the Bluetooth dongle.
- Worldwide shipping included
Cyrus and behind the "Scenes"
Risks and challenges
I've designed cyrus in a way that it does not rely on 1 company to deliver the parts.
- The electronics will be provided by a a reliable reprap supplier
- The mechanics will be supplied by makerbeam europe.
- The extruder, heated bed, some NEMA motors will be supplied by QU-BD.
It's reliable, good service and over 1000 current users of their extruders and
However there are some challenges. The plates are CNC machined by myself. and depending on how well the campaign goes, I will machine the plates myself. If the number of kits outgrows my capability, I will choose a external company to machine the plates at a early stage.
I have already and received quotes from the relevant suppliers, some like the makerbeam and qu-bd have been kept in the loop from the beginning, others have delivered samples for me to test the prototype on like the electronics and LCD panel. The aluminium plates are locally purchased to prevent possible delays.
From A to Z once funds are released.
1) Collect data from the supporters, chosen rewards, address, contact etc to
keep everyone in the loop, and regulary update the campaign page
2) confirm and place the order with makerbeam, qu-bd, aluminium plates etc
3) Send out the T-Shirt rewards
4) create video tutorials for the kit awards
5) Assemble a printer farm for fast printing the plastic parts
6) Package a sample printer and send it to myself to make sure the
packaging is adequate to protect the printer.
7) Send out the rewards
8) activate the support forum on cyrusprinter.com
Support this project
- (35 days)