We have been so excited to collaborate with the creator and graphic designer of Killer Bunnies over the past few months in designing this beautiful and functional storage and game play solution. We have such a long history with this game. For a couple of us this was one of the first games we ever played that wasn't a typical classic board game. The colorful cards, amazing artwork, and hilarious rules got us hooked and we became instant fans of the game. We have been playing for over 15 years and are so happy that we were able to design this great solution.
Killer Bunnies just celebrated its 30th anniversary. Over those 30 years they have come out with an amazing collection of boosters for the game. We have gathered a huge collection over time and are so excited to hear that there are so many boosters planned for the future. The first challenge we had when designing this was to fit all the components and all the cards into a single storage solution. AND WE DID IT!
The Bunny Box Storage and Gameplay Solution has room for the components coming in future boosters. If you purchase the etched version of the Bunny Box it will have sneak peeks at names of future boosters, future cards, and future components!!
The top portion of the Bunny Box contains starter card stands, markets, metals exchange, discard piles, and many other great components. Not only will these pieces allow for easy storage but they are meant to be used during game play to organize the table, pass cards easily, and display main components.
The lower portion contains 6 slots for the card towers. They lock into place when stored to keep them from sliding out. These card towers can then be used during game play for people to draw from. This storage unit allows for quick set up and quick clean up as well.
We have put together a few variations in the pledge levels. The first level is the Bunny Keep pledge level. This level will include 4 Card Towers, 2 Bunny Keep Drawers, and the lower portion of the Bunny Box, which we call the Bunny Keep, which will store the 4 Card Towers and 2 Drawers.
The next few pledge levels all include the Bunny Box. These pledge levels come with the Bunny Box Storage Unit and the full set of components that have been designed for this game. The "Bunny Box" pledge level will give you the full set with no etching. The "Etched Bunny Box" pledge level will give you the full set with etching, along with an assembly kit. The last and most deluxe pledge level is the "Golden Bunny Box". It is a Limited Edition set and only 20 are available. It includes the full set with etching, as well as other fabulous custom items, promo items, upgrades, etc.
All the components below can be purchased individually as an add-on. Prices are listed with each description. If you want any individual components, you can add the additional amount to your total pledge. We will then reach out to you after the Kickstarter to see what your additional funds are for.
*Etched versions are only available with the "Etched Bunny Box" and "Golden Bunny Box" pledge levels. Etched versions are not sold individually.
*All game pieces, cards, etc. do not come with this Kickstarter. You must purchase the game separately. Assembly is required for all wooden inserts. Instructions will be provided with each component.
The Card Towers are used to store your cards and as a draw or discard pile during game play. Each Card Tower holds approximately 275 unsleeved cards.
NOTE: The card towers are designed to fit sleeved cards. The number of sleeved cards that fit in the Card Tower will vary based on the type/thickness of the sleeve.
- Measurements: W: 2.93" L: 3.78" H: 5.14"
- Add-On Price (no etch): $4.50
The etched version only comes in the "Etched Bunny Box" and the "Golden Bunny Box" pledge levels. Each Card Tower will be etched with the names of various boosters. The proposed future booster names will be etched as well as a sneak peek at upcoming games!!
The Produce Stand holds all the small milk, water, cabbage, radish, and defense cards. There are slots in the center for you to store some of the produce vouchers during game play. There is also a slot in the center for your large carrot card holder to be placed. When finished playing, there is a cover that slides over Produce Stand and cards for storage and quick game clean up. There is also a discard section below each set of cards so your produce/defense cards will have a place to go once they are played. The storage cover can also be flipped around and used as a dice tray during game play.
- Measurements: W: 6.87" L: 5.88" H: 1.52"
- Add-On Price (no etch): $10.00
The etched version only comes in the "Etched Bunny Box" and the "Golden Bunny Box" pledge levels. It will include etching in all the slots so you are aware of where to place your produce cards.
The Vault will store your end game cards. This includes the small carrot cards, small zodiac cards, and small mysterious place cards.
- Measurements: W: 2.05" L: 2.98" H: 2.77"
- Add-On Price (no etch): $5.00
The etched version only comes in the "Etched Bunny Box" and the "Golden Bunny Box" pledge levels. The etching will add labels to the inside of the box for your carrot, zodiac and mysterious place cards.
The Market Stand will store and display your starter cards for Kaballa's Market, Rooney's Weapons Emporium, and Weil's Pawn Shop. There is a spot to place pawns during game play as well as a storage drawer for pawns and small game tokens.
- Measurements: W: 5.88" L: 8" H: 1.25"
- Add-On Price (no etch): $9.00
The etched version only comes in the "Etched Bunny Box" and the "Golden Bunny Box" pledge levels. The etching will add labels to the card slots and inside the drawers to help with placement. It also will list markets coming in future boosters.
This is a display and storage unit for Morden's Metals Exchange dice and coin tokens. The top component for the dice and coins can be lifted up and stored within the stand. This gives your coins and dice a place to live during storage and makes for quick set up.
- Measurements: W: 3.27" L: 4.12" H: 1.32"
- Add-On Price (instruction etch included only): $7.00
The etched version only comes in the "Etched Bunny Box" and the "Golden Bunny Box" pledge levels. It includes rules for metals exchange engraved on top of the box, as well as etching for the coins and dice. The rules have been etched on this box so that you can use this during game play even if you do not have the starter card.
This is a display unit for your Highest Enlisted Ranked Bunny card (HERB) and Highest Officer Ranked Bunny card (HORB). The stand also has a slot so your cards can have the plastic clip stand attached to the card.
- Measurements: W: 5.78" L: 4.12" H: 1.25"
- Add-On Price (no etch): $4.00
The etched version only comes in the "Etched Bunny Box" and the "Golden Bunny Box" pledge levels. The etching includes labels for where each card should be placed.
This is a display unit for the Highest Ranked Relative card (another future component coming in future boosters!!).
- Measurements: W: 2.95" L: 4.12" H: 1.25"
- Add-On Price (no etch): $2.50
The etched version only comes in the "Etched Bunny Box" and the "Golden Bunny Box" pledge levels. It will include an etch so you know what card belongs on this stand.
This is a display unit that includes 2 discard areas for discarding Bunny and Weapon cards. These discard areas allow for the bunny and weapon cards to be easily passed around the table, since you can buy these cards back throughout the game. The 2 discard stands connect together to create a storage box. This is where we recommend storing all the dice for your game.
- Measurements: W: 3.27" L: 4.12" H: 2.59"
- Add-On Price (no etch): $5.00
The etched version only comes in the "Etched Bunny Box" and the "Golden Bunny Box" pledge levels. The etching adds labels for what to discard in each deck.
This is a storage and display unit for the carrot cards. It also includes 2 additional discard trays for your spaceships (future game component!!!) and Kaballa Dollas. This allows for you to pass these easily around the table. Until the new spaceship component is in play you can use the second discard tray however you like. The Carrot Stand also fits into the center section of the Produce Stand.
- Measurements: W: 4.12" L: 1.27" H: 3.85"
- Add-On Price (no etch): $5.00
The etched version only comes in the "Etched Bunny Box" and the "Golden Bunny Box" pledge levels. The etching will add labels for what is stored in each stand.
This Voucher Drawer will store all the voucher cards included in the game. This includes produce vouchers and Kaballa Dolla vouchers.
- Measurements: W: 2.13" L: 5.88" H: 1.52"
- Add-On Price (no etch): $4.50
The etched version only comes in the "Etched Bunny Box" and the "Golden Bunny Box" pledge levels. It will include etching on the outer box of the drawer.
If you are looking for additional card storage because you have sleeved all your cards and want to make sure you do not run out of space and do not need the Bunny Keep Drawers (as seen below and included in the Bunny Keep pledge level) then this is the add-on you are looking for. This is the Bunny Keep with 6 card towers for all your additional card storage needs.
- Measurements: 9.35 x 10.41 x 4.17
- Add-On Price: $40
There is no etched option with this component.
This drawer only comes in the Bunny Keep pledge level and cannot be purchased individually. This box will give you space to store game components.
As part of the Golden Bunny Box, you will receive upgraded components with your pledge. These upgrades include 3 metal dice from Dice Dungeons (1 gold D6, 1 silver D6 and 1 copper D6). In addition to the dice you will receive 9 acrylic etched coins from Just Bee Co. to replace your cardboard coins that are included with the game (3 gold coins, 3 silver coins, and 3 copper coins).
Add-On Price: $20
*We may make small adjustments for ease of assembly and use for the products listed above.
After our first successful project we were able to get a better grasp on what is the best and most accurate way of shipping to our backers. Because of this we will be handling all shipping in-house. This means we will charge shipping AFTER the project is completed and will be on a one-by-one basis. We will reach out to each backer so that we can confirm which products they pledged for, as well as to give them an accurate invoice for the shipping charges to be paid.
We are aware this method is far more time consuming for us as a team, but we are willing to take this responsibility on so each backer pays no more than they need for shipping, and each shipment goes through as few hands as possible on its way to your door.
Estimated Shipping for complete Bunny Box*:
United States: $18.00
International: Ranges from $30-$55
*Note these are only estimates and are all subject to change.
Risks and challenges
The great thing about this Kickstarter is the minimal risks associated with it. Having all the designs completed and approved by our team, and the game designers that we have been working with, there is no fear in the product not being completed. Additionally, we are handling all the shipping in-house so there will be a direct line of communication between the backers and Sand Box Gaming over any shipping issues.
The only foreseeable risk would be if our laser cutter experiences any sort of mechanical breakdown, in which case it would delay the speed at which we could get the product cut and delivered.
Overall, we are confident that any potential risks have been taken care of prior to this Kickstarter going live.Learn about accountability on Kickstarter
- (30 days)