Project image
)}
CA$ 4,988
pledged of CA$ 2,000pledged of CA$ 2,000 goal
32
backers
39hours to go

All or nothing. This project will only be funded if it reaches its goal by Wed, April 1 2020 12:00 AM UTC +00:00.

Robo-Tank DIY Aquarium Controller

Fully automate your aquarium with an open source solution and Reef-pi.

Robo-Tank DIY Aquarium Controller

Fully automate your aquarium with an open source solution and Reef-pi.

CA$ 4,988
pledged of CA$ 2,000pledged of CA$ 2,000 goal
32
backers
39hours to go

All or nothing. This project will only be funded if it reaches its goal by Wed, April 1 2020 12:00 AM UTC +00:00.

 

Support

  1. Pledge without a reward

    CA$
    About $8

    Back it because you believe in it.

    Support the project for no reward, just because it speaks to you.

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge CA$ 49 or more About $35

    DIY - Standard board

    This is the standard controller board, it comes with all the surface mount components mounted and gets powered on my bench. You solder the header pins and connectors, nothing is polarity sensitive.

    Includes:
    • Standard controller board - partially assembled
    • 13× Pluggable screw terminal connectors
    • Face plate for controller case
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    2 backers
    CA$
    About $35

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge CA$ 49 or more About $35

    DIY - 8 Outlet AC Power Bar Board

    This is the 8 outlet 120v - 240v 10 Amp AC power bar board, it comes with all the surface mount components mounted and gets powered on my bench. You solder the connectors, large resistors and large capacitors, nothing is polarity sensitive.

    This will work with the controller or any Arduino. Doesn't include AC outlets or IEC power cord.

    Includes:
    • 3D files to print cases and brackets
    • 8 outlet AC power bar board - partially assembled
    Less
    Estimated delivery
    Ships to Anywhere in the world
    1 backer
    CA$
    About $35

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge CA$ 65 or more About $47

    Plug & Play - Standard Controller

    This is the standard controller fully assembled and tested and mounted in a 3D printed case.

    Includes:
    • Standard controller board - assembled
    • 13× Pluggable screw terminal connectors
    • 3D printed controller case
    • Face plate for controller case
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    CA$
    About $47

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge CA$ 68 or more About $49

    DIY - Deluxe board

    This is the deluxe controller board, it comes with all the surface mount components mounted and gets powered on my bench. You solder the header pins and connectors, nothing is polarity sensitive.

    Includes:
    • Deluxe controller board - partially assembled
    • Optical sensor extension board - partially assembled
    • 19× Pluggable screw terminal connectors
    • Face plate for controller case
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    1 backer
    CA$
    About $49

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge CA$ 89 or more About $64

    Plug & Play - Deluxe Controller

    This is the deluxe controller fully assembled and tested and mounted in a 3D printed case.

    Includes:
    • Deluxe controller board - assembled
    • Optical sensor extension board - assembled
    • 19× Pluggable screw terminal connectors
    • 3D printed controller case
    • Face plate for controller case
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    CA$
    About $64

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Select this reward

    Pledge CA$ 89 or more About $64

    DIY - Standard + AC Power Bar Boards

    This is the standard controller board and one AC power bar board, it comes with all the surface mount components mounted and gets powered on my bench. You solder the header pins, connectors, large resistors and large capacitors, nothing is polarity sensitive.

    Includes:
    • Standard controller board - partially assembled
    • 8 outlet AC power bar board - partially assembled
    • 13× Pluggable screw terminal connectors
    • Face plate for controller case
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    1 backer
    CA$
    About $64

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  8. Select this reward

    Pledge CA$ 97 or more About $70

    Plug & Play - 8 Outlet AC Power Bar

    This is the 8 outlet 120v - 240v 10 Amp AC power bar board that comes fully assembled and tested and mounted in a 3D printed case with North American outlets.

    Requires an IEC AC power cable, same as desktop computer + DB9 serial cable or serial adapter. This will work with the controller or any Arduino.

    Includes:
    • 8 outlet AC power bar board - assembled
    • AC outlets - North American (Type B)
    • 3D printed AC power bar case
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    CA$
    About $70

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  9. Select this reward

    Pledge CA$ 100 or more About $72

    DIY - Deluxe Controller with pH board

    This is the deluxe controller board with pH circuit, it comes with all the surface mount components mounted and gets powered on my bench. You solder the header pins and connectors, nothing is polarity sensitive.

    A pH probe is not included.

    Includes:
    • Deluxe controller board with pH circuit - partially assembled
    • Optical sensor extension board - partially assembled
    • 19× Pluggable screw terminal connectors
    • Face plate for controller case
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    CA$
    About $72

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  10. Select this reward

    Pledge CA$ 105 or more About $75

    DIY - Deluxe + AC Power Bar Boards

    This is the deluxe controller board and one AC power bar board, they comes with all the surface mount components mounted and gets powered on my bench. You solder the header pins, connectors, large resistors and large capacitors, nothing is polarity sensitive.

    Includes:
    • Deluxe controller board - partially assembled
    • Optical sensor extension board - partially assembled
    • 8 outlet AC power bar board - partially assembled
    • 19× Pluggable screw terminal connectors
    • Face plate for controller case
    • Detailed assembly manuals
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    1 backer
    CA$
    About $75

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  11. Select this reward

    Pledge CA$ 122 or more About US$ 87

    Plug & Play - Deluxe with pH

    This is the deluxe controller with pH circuit fully assembled and tested and mounted in a 3D printed case.

    A pH probe is not included.

    Includes:
    • Deluxe controller board with pH circuit - assembled
    • Optical sensor extension board - assembled
    • 19× Pluggable screw terminal connectors
    • 3D printed controller case
    • Face plate for controller case
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    4 backers
    CA$
    About US$ 87

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  12. Select this reward

    Pledge CA$ 129 or more About $92

    Plug & Play - Standard + AC Power Bar

    This is the standard controller and one AC power bar fully assembled and tested and mounted in 3D printed cases.

    Includes:
    • Standard controller board - assembled
    • 8 outlet AC power bar board - assembled
    • AC outlets - North American (Type B)
    • 13× Pluggable screw terminal connectors
    • 3D printed controller case
    • 3D printed AC power bar case
    • Face plate for controller case
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    CA$
    About $92

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  13. Select this reward

    Pledge CA$ 145 or more About US$ 104

    DIY - Deluxe + pH + AC Power Bar Boar

    This is the deluxe controller board with pH circuit and one AC power bar board, they comes with all the surface mount components mounted and gets powered on my bench. You solder the header pins, connectors, large resistors and large capacitors, nothing is polarity sensitive.

    A pH probe is not included.

    Includes:
    • Deluxe controller board with pH circuit - partially assembled
    • Optical sensor extension board - partially assembled
    • 8 outlet AC power bar board - partially assembled
    • 19× Pluggable screw terminal connectors
    • Face plate for controller case
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    6 backers
    CA$
    About US$ 104

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  14. Select this reward

    Pledge CA$ 145 or more About $104

    DIY - Deluxe + 2 AC Power Bar Boards

    This is the deluxe controller board and two AC power bar boards, they comes with all the surface mount components mounted and gets powered on my bench. You solder the header pins, connectors, large resistors and large capacitors, nothing is polarity sensitive.

    Includes:
    • Deluxe controller board - partially assembled
    • Optical sensor extension board - partially assembled
    • 8 outlet AC power bar board - partially assembled
    • 19× Pluggable screw terminal connectors
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    3 backers
    CA$
    About $104

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  15. Select this reward

    Pledge CA$ 150 or more About $107

    Plug & Play - Deluxe + AC Power Bar

    This is a plug and play deluxe controller and one 8 outlet AC power bar that comes fully assembled and tested and mounted in 3D printed cases.

    Includes:
    • Deluxe controller board - assembled
    • Optical sensor extension board - assembled
    • 8 outlet AC power bar board - assembled
    • AC outlets - North American (Type B)
    • 19× Pluggable screw terminal connectors
    • Face plate for controller case
    • 3D printed controller case
    • 3D printed optical sensor extension case
    • 3D printed AC power bar case
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    2 backers
    CA$
    About $107

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  16. Select this reward

    Pledge CA$ 185 or more About $132

    Plug & Play - Deluxe + pH + AC Power Bar

    This is the deluxe controller with pH circuit and one AC power bar fully assembled and tested and mounted in 3D printed cases.

    A pH probe is not included.

    Includes:
    • Deluxe controller board with pH circuit - assembled
    • Optical sensor extension board - assembled
    • 8 outlet AC power bar board - assembled
    • 19× Pluggable screw terminal connectors
    • Face plate for controller case
    • 3D printed controller case
    • 3D printed optical sensor extension case
    • 3D printed AC power bar case
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    8 backers
    CA$
    About $132

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  17. Select this reward

    Pledge CA$ 220 or more About $157

    Plug & Play - Deluxe + Two AC Power Bars

    This is the deluxe controller and two AC power bars fully assembled and tested and mounted in 3D printed cases.

    Includes:
    • Deluxe controller board - assembled
    • Optical sensor extension board - assembled
    • 8 outlet AC power bar board - assembled
    • 16× AC outlets - North American (Type B)
    • Face plate for controller case
    • 3D printed controller case
    • 3D printed optical sensor extension case
    • 3D printed AC power bar case
    • 19× Pluggable screw terminal connectors
    • 3D files to print cases and brackets
    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    CA$
    About $157

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.