Funded! This project was successfully funded on July 28, 2013.

Photo-main
Play
00:00
00:00

Mounts to any wall or flat surface using adhesive strips or screws. Works with ANY tablet!

“It'll turn my iPad into the bedroom TV I never had!” - Robert Cappuccitti (Backer)

Put Your Tablet on the Wall! 

The LEDGE is a simple wall mount solution for tablet computers that can adhere to any flat surface. With the use of 3M Command adhesive strips or drywall anchors and screws, the LEDGE can be placed anywhere around the home and office. Put one in every room!

How does the LEDGE work?

Mounting the LEDGE is extremely simple! For a semi-permanent installation, it can be mounted using the included 3M Command adhesive strips. Drywall anchors and screws are also included for a permanent installation. Just place your tablet on the LEDGE and allow it to rest against the wall. 

Where can I use it?

Since the LEDGE can mount to any wall or flat surface, its great anywhere in the home or workplace. The LEDGE can be mounted to a variety of surfaces including drywall, wood, stainless steel, glass, ceramic, and most surfaces encountered during daily life. 

  • Watch movies or TV shows in the bedroom
  • Follow recipes while cooking in the kitchen
  • View DIY guides and how-to videos in the workshop
  • Listen to internet radio in the bathroom
  • Follow a workout guide or exercise video in the gym
  • Extend your desktop / laptop display
  • Use by the front door for a "Home Base" when using home automation and security apps

Where will you put it?


NOTE: When using the LEDGE in a bathroom, basement, or other damp areas, it is recommended that 3M Command water-resistant adhesive strips are used.

How is it Manufactured? 

Each LEDGE is made by extruding a continuous piece of Aluminum, and cutting to length. It then goes through a serious of CNC machining operations to mill the slots for the screws and round off the edges. Then, it goes through an abrasive sandblasting process, and is finally finished with a clear anodize. The combination of these processes produces a premium high end finish that is built to last and looks great in any interior.

What rewards are available?

How will the money be used? 

The money raised from this Kickstarter campaign will be used to fund the first production run. 

  • Build extrusion die
  • Purchase raw aluminum
  • Machine and finish parts
  • Purchase mounting accessories (adhesive strips, drywall anchors, and screws)
  • Shipping


Project Timeline

Who is RNDM design? 

RNDM Design is a startup design firm founded by Chris Blackburn. We are dedicated to taking creative and innovative products through the development process, from conception to high volume manufacturing. We are always working on creative projects. Feel free to contact me if your interested in collaborating!

Special thanks to Matt Stambaugh Media and Optic Rhythm Cinematics  for the great photography and videography.

iPad is a registered trademark of Apple. 

Command is a registered trademark of 3M.

Risks and challenges Learn about accountability on Kickstarter

Any development project has risks and challenges associated with it. I work closely with an extrusion and machining supplier to ensure that each LEDGE is manufactured and finished with precision, as well on being on time.

FAQ

  • The LEDGE was introduced on Kickstarter in 2012, but funding was unsuccessful. Slight modifications were done to the design and new suppliers were evaluated. The LEDGE is now available at half the cost of the previous campaign!

    Last updated:
162
Backers
$6,091
pledged of $6,000 goal
0
seconds to go
  • Pledge $1 or more
    You selected

    3 backers

    Every dollar counts. Thank you for your support!

    Estimated delivery:
  • Pledge $19 or more
    You selected

    5 backers All gone!

    EARLY BIRD: (1) LEDGE in premium sandblasted and clear anodized finish. Free shipping to the US.

    Estimated delivery:
    Add $20 USD to ship outside the US
  • Pledge $22 or more
    You selected

    10 backers All gone!

    EARLY BIRD TWO: (1) LEDGE in premium sandblasted and clear anodized finish. Free shipping to the US.

    Estimated delivery:
    Add $20 USD to ship outside the US
  • Pledge $23 or more
    You selected

    5 backers All gone!

    EARLY BIRD FOUR: (1) LEDGE in premium sandblasted and clear anodized finish. Free shipping to the US.

    Estimated delivery:
    Add $15 USD to ship outside the US
  • Pledge $25 or more
    You selected

    24 backers Limited (1 left of 25)

    EARLY BIRD THREE: (1) LEDGE in premium sandblasted and clear anodized finish. Free shipping to the US.

    Estimated delivery:
    Add $20 USD to ship outside the US
  • Pledge $28 or more
    You selected

    55 backers

    SILVER: (1) LEDGE in premium sandblasted and clear anodized finish. Free shipping to the US.

    Estimated delivery:
    Add $20 USD to ship outside the US
  • Pledge $40 or more
    You selected

    40 backers

    INTERNATIONAL: (1) LEDGE in premium sandblasted and clear anodized finish. Free shipping anywhere in the world.

    Estimated delivery:
  • Pledge $40 or more
    You selected

    8 backers Limited (42 left of 50)

    BLACK: (1) LEDGE in premium sandblasted and BLACK anodized finish. Free shipping to the US.

    Estimated delivery:
    Add $20 USD to ship outside the US
  • Pledge $75 or more
    You selected

    7 backers Limited (2 left of 9)

    PROTOTYPE: (1) LEDGE Prototype in "Raw Aluminum" finish, and (1) LEDGE in premium sandblasted and clear anodized finish. Free Shipping to the US.

    Estimated delivery:
    Add $20 USD to ship outside the US
  • Pledge $300 or more
    You selected

    1 backer All gone!

    DEVELOPMENT PACKAGE: (1) LEDGE first ever prototype hand-milled by myself, (1) LEDGE Prototype in "Raw Aluminum" finish. and (1) LEDGEs in premium sandblasted and clear anodized finish.

    Estimated delivery:
    Add $25 USD to ship outside the US
Funding period

- (37 days)