Ein Prototyp ist sozusagen ein vorläufiges Modell dessen, was bei einem Projekt entstehen soll, wenn es sich dabei um ein Produkt handelt. In diesem Fall müssen den Unterstützern Unterlagen zu einem funktionierenden Prototypen präsentiert werden. In dieser Galerie kann der Projektgründer Fotos oder Videos hochladen, damit sich die Unterstützer eine Vorstellung davon machen können, in welchem Stadium sich das Projekt befindet; was bereits erreicht wurde und was noch aussteht. Der Entwicklungsprozess ist zwar bei jedem Projekt unterschiedlich, aber für gewöhnlich gibt es dabei die folgenden Phasen:
Untersuchungen, die Ideen und Funktionalität unterlegen.
Weist Funktionalität des Endprodukts auf, sieht aber etwas anders aus.
Sieht aus wie das Endprodukt, hat aber keine funktionalen Eigenschaften.
Sieht aus wie das Endprodukt und hat dieselben funktionalen Eigenschaften, wurde aber aus anderen Materialien oder in einer anderen Art und Weise hergestellt.
Gleicht dem Endprodukt in Aussehen, Funktion und Herstellungsweise.
In 2015 we launched our first product on Kickstarter, a stripped back navigation device for bicycles. People loved it and we went on to be one of the big success stories of Kickstarter. But we quickly realised it wasn’t only cyclists who needed a better solution for navigation. After nearly three years of developing and refining our technology, we’re incredibly excited to be back on Kickstarter, this time to improve motorcycle navigation. Beeline Moto.
Motorcycling is the ultimate expression of freedom and adventure. Feeling the rush of the wind and the road beneath you is an exhilarating experience for all who get the chance to ride. However, navigating your way through the mountains or a busy city on a motorbike is not so fun.
Phones work well for walking, not so much for riding. Stopping to check your phone is a frustrating reality, while vulnerability and battery life means they're just not built to be mounted on handlebars.
Satnavs are over complicated. Map downloads, PC connections to set up routes, detailed screens and complex instructions that take your focus off the road. Not to mention eye watering prices and dated product design.
Paper maps are a lovely nod to the past...but it’s 2018.
Beeline Moto is the antidote to navigation frustration. Everything about it has been built with elegant simplicity in mind. From the clean navigation interface and fast setup with your smartphone, through to the super long battery life and the award winning rugged design, we’ve put your needs first throughout.
Beeline Moto’s interface guides you in the clearest manner possible with one big arrow pointing in the direction you need to be heading right now. Simple! No complex instructions, no detailed maps. It’s stripped back to the essential information you need in the moment, leaving you to focus on what’s important - the road or trail ahead of you.
Whether that’s guiding you precisely along a set route along the coast, or from point to point off the beaten track, it’s wonderfully intuitive. You don’t navigate, you flow.
The Beeline app (iOS & Android) makes planning routes a breeze: quick location search; save favourite places; drag and drop pins to create your perfect route; save routes and share with friends. No PC connection required!
Want to try something new? There’s a wealth of great routes out there created by adventurers who’ve gone before us. Take advantage of it by following their routes. Import GPX files into Beeline in seconds.
In this day and age it shouldn’t be the norm to pay for and update maps every time you go to a new place. Beeline maps have global coverage from day 1 and always stay up to date, giving you one less thing to worry about.
Once you’ve set up your route, no data connection is required meaning you can ride off the grid. Also great for saving on data costs when travelling abroad.
N.B. Due to local regulation, we can't currently guarantee functionality in mainland China
Super low power screen technology means Beeline Moto’s 350mAh battery lasts for 30 hours of use between charges. To put that into context, a Garmin Zumo lasts for 4 hours, a TomTom Rider lasts for 6.
GPS and data optimisation means your phone can last all day too.
Fully waterproof, shockproof and a rock solid attachment mechanism mean Beeline Moto is ready for whatever you can throw at it. The transflective memory-in-pixel display is visible in the brightest sunlight and a built in backlight automatically turns on at dusk.
Beeline Moto’s twist lock fitting holds it on your bike securely, snapping on and off in a moment. A range of bar and tank mounts attach it to any motorcycle or scooter. When off the bike, the compact size slips into a pocket easily.
We pride ourselves in making beautifully designed products. In fact, we’ve even beaten Apple in product design awards and have been featured in the prestigious Design Museum Designs of the Year exhibition. That design heritage means Beeline Moto looks right at home on the bars of any bike, from cruiser to scooter.
For those with an eye for the finer things in life, treat yourself to a limited edition machined aluminium version of Beeline Moto.
Keep a record of everywhere you’ve been on the app and see stats on how far and how fast you went. Odometer and Speedo modes show live stats on the device with super accurate GPS tracking. Great for joint rides and bragging rights.
Beeline Moto is a smart device, connected to your phone and to the cloud. This means it can keep getting better through software updates and we’re committed to doing just that. Since we launched our first product for bicycles we’ve released 8 major feature updates based on the feedback we’ve heard from our community.
Beeline Moto will receive the same dedication - continuously evolving and improving.
Hear Philip Marshall, founder of We Ride London, talk about the collaborative approach to developing Beeline Moto
Your Beeline Moto journey starts here! Kickstarter backers will be the very first to receive Beeline Moto fresh from the factory in February and gain access to exclusive updates on development between now and then. Becoming a backer couldn't be easier:
Step 1: choose your basic pledge level
There are several levels to choose from, all of which represent at least 35% off the expected future retail price of $199 (~£149 / €169). A limited number of EarlyBird pledges are available with even bigger savings for fast movers! You'll be invited to choose any options via a BackerKit survey at the end of the campaign.
Step 2: add any extras (optional)
Want extra mounts, merchandise or to upgrade a Beeline Moto to the machined aluminium limited edition? Simply add the correct amount to your pledge and you'll be invited to choose the extras at the end of the campaign.
E.g. if you want 1x Kickstarter Special + 1x t-shirt, pledge a total of $149 ($129 + $20)
This all started over three years ago when Beeline founders and good friends, Tom and Mark, decided they’d had enough of getting lost in London on their bikes. What started as an idea for a beautiful compass quickly spiralled into a connected tech product. From then it turned into a runaway Kickstarter campaign and finally, a fully fledged startup company with a small but incredibly talented team who are passionate about helping people have better, safer, journeys.
We’re not just cyclists, we also ride motorcycles. Mark nips around town on a classic Italian Vespa and Tom loved nothing more than exploring the African Savannah on his KTM when he lived in Kenya. So when the requests started coming in to make Beeline for motorcycles, we decided we had to do it.
We took all the knowledge, experience and technology from our first product and poured it into making the perfect navigation device for motorcyclists. With Beeline Moto, we think we’ve done it!
Building a product for the first time is HARD. We’ve been there and have enormous respect for those who take it on. Getting a product from Kickstarter to delivery for the first time is a road fraught with unexpected hazards and challenges.
However, this isn’t our first time. Having overcome all of those hazards and challenges once already, we come to our second Kickstarter campaign with a wealth of experience (and the battle scars to prove it). In fact we often share that experience with other creators at events run by Kickstarter themselves. We know exactly what it takes to bring a product from here to delivery. We’ve already built the technology. We already have manufacturers, suppliers and logistics providers in place. Everything is lined up for a smooth road to delivery of the product.
Don't take our word for it. Here are some testimonials from backers of our first product for bicycles
The Beeline family has grown since last time. We were just two people back then (plus a lot of generous support!) We’ve since welcomed all this lovely, talented lot and they’re as passionate about making amazing products for you as we are. We couldn’t be luckier to get to work with them every day.
Product development is well under way. Physical design is as good as complete and prototypes are built. The technology is based on the foundation of the cycling product so the software just needs some last polish and testing, then it’s ready. As Beeline Moto builds upon our first product, it benefits from everything from manufacturing, quality control and UX design through to sensor fusion algorithms and GPS Kalman filters. All of which have been rigorously tested by thousands of cyclists for over a year.
We’re old hands at this now so are very confident in our timelines. Subject to any unforeseen hiccups, below is what will be happening between now and February.
We’re enormously excited about the road ahead but we wouldn’t have got to this point without the incredibly generous support of literally thousands of people. No doubt we’ll miss many but we want to take this opportunity to say thank you to….
The 3,038 backers who believed in our first Kickstarter project and have shaped Beeline ever since
Motorcycle aficionados Malle London, the Sex Pistons, Bike Shed and Motorbike Women for their rigorous testing and feedback
The team at Map Project Office who shaped the design of Beeline
The 600+ individuals who believed in us enough to invest in the company
Victor and the gang in Shenzhen
Seedcamp, EarlyMarket, True, LCIF and the rest of our investors
Matt Webb for his monthly wisdom
Emma, the Mench and the Whatif?! team for all the early help
The Hardware Club for the CES and IFA trips
The babes and boys on bikes who volunteered to star in our awesome videos
Paul, Chris and Tim at OneFilms - creative geniuses who made the awesome videos
The incredible team who we get to work with every day - Kate, Sam L, Marc, Victor, Sam W, Joe
The team members who’ve moved on but were pivotal in getting us here - Charlie, Chet, Clem, James, Veronica, Hugo, Danny, Dan, Karim and George
and many many others who've helped us along the way from introductions to sharing their expertise over endless cups of coffee and patience
Risiken und Herausforderungen
We really are in a great place to deliver this project quickly and effectively. We’ve done it before and already have all of the pieces of the puzzle in place for manufacture with established relationships with our manufacturing partners for tooling, production and assembly. The product is already much further along the path to completion than is often seen on Kickstarter which means less margin for error. We also have the business experience of running this company for several years, advising other businesses in our previous lives and some very smart advisors keeping us on track. All of this means we’re on top of all the less glamorous but absolutely crucial financial management side of things.
That said, no Kickstarter project is without risk so it’s important to identify where any potential road bumps could lie and what we’re doing to mitigate them. These are what we see as major potential risks and we’re confident that at worst these would cause delays rather than an absolute failure to deliver.
1) Supply chain. A hazard for any hardware company is that the supply of certain components or materials dries up. To mitigate this, we manufacture in Shenzhen, the world’s hub for electronics manufacture and we have back ups lined up so that we aren’t reliant on any single component supplier.
2) Tooling. The tooling process (building the moulds to produce injection moulded parts) takes a long time. We’ve already built in time for three iteration cycles to ensure these are spot on, but if more are needed it could cause delays as we won’t sacrifice quality by rushing.
3)Certification. The bluetooth antennae and batteries in connected products such as Beeline Moto must be certified before they can be mass manufactured which can take time. The risk of delays here is minimal as the batteries and antenna design are identical to those used in the original Beeline bicycle product and we have already worked with a known testing lab in Shenzhen
Come and spend a day with the Beeline team. Meet Tom, Mark and the passionate bunch behind Beeline. See how we work and share your ideas with us. Dinner's on us!
...and go home with a machined aluminium Beeline Moto