ECM is a technique to generate energy/electricity via electrons/ions and gravity. Get some nice stuff and support this technology.
Dieses Projekt wird nur finanziert, wenn bis mindestens 3.000 € zusammenkommen.
ECM aka. electric circuit multiplier is a technique to generate electricity via electrons/ions and gravity.
Some introduction
Please sit down take a relaxed hour and try to understand this technique.
It's not free energy and also it's not energy from nothing. Gravity is the first fundamental force of nature. And our universe has 4 fundamental forces.
When did you last used electric power?
It's been just a second ago, because you're reading this with a machine that relies on electric power. So you could see, it's a very fundamental piece of our daily life.
A simple description of this technique
Electricity has a mass in fact the mass of electrons. So electrons could be accelerated via gravity.
Inside a wire electrons travel with a fraction of a millimeter per second. So gravity could add some extra speed to the electrons.
And 1 ampere (1 watt power = 1 A x 1 V) is equal to 6.241×10^18 electrons per second. So when the electrons inside the ECM-device travel, for example, 2-times faster than we can produce 2 times more ampere. It's just a matter of time.
Why is the ECM-technology so useful?
Flexible voltage/current-levels
Very high capacity especially in the case of electrons charge
For a better understanding: a principle schema.
What has been already done?
What needs to be done next?
Raspberry Pi 2 incl. IR camera and IR diodes is used for monitoring thermal changes.
Most of the parts i had used are standard parts but i think i will soon need some special parts. For example to finish the ion/electron-bottle.
Some caveats
I think with the ECM technology you could just produce direct current and not alternating current cause it will be hard to generate the same level of voltage and current over a longer period of time.
So to use this invention in production environments you will also need a module to stabilize the current/voltage right after the ECM-device.
Before you go ahead, please make sure you are a bit familiar with the following terms:
https://en.wikipedia.org/wiki/Gravity
https://en.wikipedia.org/wiki/Electron
https://en.wikipedia.org/wiki/Ion
ion/electron-bottle
How does it work in detail?
Electrons from inside a wire comes out to the air or any other gas. Then the air is going to be ionized and we catch these ions with a magnetic field. After we have collected enough ions and in the future electrons. We let them just fall back into the circuit so the earth's gravity accelerates the ions and produces a long running circuit of electricity. Sounds easy right? But it isn't. Currently i use 30.000 Volt to ionize the air and about 2000 meters of copper wire and much more. And now my first prototype is able to generate EMP's and also ions.
Some measurement stuff
Basic control unit
Prototype magnets
Inside the magnets ...
challenges:
- fine control over the magnetic fields
- build a web-based interface for basic users
- choose the right materials
risks:
- destroying the unique magnets (it requires several weeks to build them again)
- destroying the unique power supply
- destroying the unique control unit
Noch Fragen? Wenn dir die obigen Informationen nicht weiterhelfen, kannst du dich auch direkt an den Projektgründer wenden.
- (30 Tage)