Use this space to cheer the creator along, and talk to your fellow backers.
Have a question?
This comment has been removed by Kickstarter.
@Charles, I've just checked into your help ticket, and I can see the last reply sent to you was yesterday. The reason the help desk have sent you multiple emails is that they thought you were asking for links and codes to specific items in each email you sent.
Please note that the access codes to your pledge were sent to you last year and are still in your Kickstarter inbox. I can see you have logged in and used the codes on some items already. You just need to go back to this Kickstarter Email and get these codes or ask the help desk to re-send you all your codes and download links via email
Once the items are in your download section, you can re-download them and any future updates.
@Charles, our help desk is receiving emails at the moment so It may have been a temporary outage of some sort.
If you could email email@example.com we will sort it for you no problem
Actually not just my email it seems. Looks like All email even the contact form on their website.
Sorry, we were unable to deliver your message to the following address.
554: 5.7.1 firstname.lastname@example.org: Relay access denied
I kow it's a long shot get any others response on here now but after recently looking at what I actually got from this kickstarter after 8 months I found that I was missing most of the stretch goals for WWII + Stone Ruins. I contacted the company and the person on the other end tried to be helpful and actually got me more of the missing items but it took 8 emails and STILL something is missing and then it looks like they blocked my email!! Nothing short of fucking ridiculous at this point.
http://www.3dpminiatures.com is a new forum. It's just beginning but I think it would be great to see this will become a place for people to share ideas and help newcomers to 3D Printing for games and models
Merry Christmas everybody
@Charlie, yes I have your Dog House on the to do list :)
@Matt - I think you forgot one model :)
@Ian, I have sent each backer a link via the message service, This will take you to your pledge and show you what downloads you have access to. Alternatively, you can go here and select your pledge http://www.printablescenery.com/product-category/pledges/apocalypse-kickstarter/
Is there a quick and easy list of everything we got so I can make sure I have "purchased" everything?
Hi everyone, all the pledges have been delivered and all the stretch goals except for the roofs have been delivered, We have the roof beta available and the final roof will be available next week.
Any update on the ruins?
I have to admit, I've lost track. Is there much (or anything) left outstanding?
I'm not sure if I'm on the chat? When I type I lose all sound.
Here is the link if your interested in joining the live chat https://live.kickstarter.com/printable-scenery/live/apocalypse-and-rampage-system
Live chat about 3D printing and Printable Scenery models
I'm going to try the Kickstarter Live Chat later today. Feel free to join in and ask questions.
Hopefully see you then
Live Chat About 3D Printing and Printable Scenery Models
Answering questions about Printable Scenery LOS ANGELES, 10:00am Sun, Nov 20 2016 NEW YORK, 1:00pm Sun, Nov 20 2016 LONDON, 6:00pm Sun, Nov 20 2016
They look cool!
@Kieth, they look great, I've been printing some out this week http://www.printablescenery.com/product/winterdale-in-ruins.
I'm just about to post an update
What's the status of Winterdale in ruins?
@Andrew, the Aztec Ruins were part of the Sci-Fi Pledge. Another backer answered your question last time so I thought that was OK.
Since I didn't get a reply last time, Once again I ask this...
So what set is the Aztec Ruins supposed to go with, because my code does not work on it? My Pledge is the WW2 Ruins and the Stone Ruins. I would think the Aztec Ruins would fall under the Stone Ruins. IS this the case?
@James, yes we will have those ready next week, we are also going to make OpenLOCK versions
@Bill, The Apocalypse add-ons are available now via the website. I'll resend you the information to you for downloading. The Rampage add-ons will be available as soon as rampage campaign finishes
I've backed both Winterdale 1 and 2, as well as apocalypse and the new rampage. How do I get the additional add-ons?
Is there an E.T.A. on the 'Winterdale in Ruins' set yet?
Really looking forward to getting my hands on those files.
For people looking for an affordable, workhorse printer, and who live in the USA, monoprice has a sale today on their maker select v2 printer. This is a clone or OEM version of the Wanhao Duplicator i3. I have used one to print and it is solid and goes as well as 100 microns. It has a heated bed standard, but I would suggest building some form of enclosure if you plan on printing a lot of ABS.
The code to give 15% off is maker15. It is $330 with free shipping and now another 15% off, so under $300.
@Matt / @Printable Scenery Good to hear that !! Sent you a PM with some ideas.
@Donatos, Yes OpenLOCK Sewers will be coming very soon, they might even be free !!!
Two photos sent. Also, the roof tiles are coming out really stringy. Extruder set at 210 centigrade. Is that too hot, or too cool> Or is that due to something else?
@Rhett, yes that's an easy fix, email a photo to email@example.com and I can let you know what to do
Ok, I did a test of the village cottage. Bottom level was fine, Roof is warped on one side, but temps look to have been stable throughout. Is there something I should do to prevent warping? Printbed temp is 60 degrees centigrade.
Matt, thanks. Got Cura and sliced up files for my first building. Came out great after 6ish hours of printing. I should be good now.
@Rhett, You need to use a 'Slicer' this is a program that you use to make the stl ready for printing, It allows you to controls how its printed and set things like detail level etc. Your printer should come with one, if not then get Cura from ultimaker, it's free.
Help! My pre-loaded test prints went fine, but now I can't get the .stls to print. I guess it can only read gcode files? So what do I need to do to get it to recognize .stl files?
Finally got a printer. Doing test prints on my new Monoprice Maker Select i3 V2
@Donatos, Yes for sure we will do some sewers for Rampage, they will work well with that system
@Printable Scenery As I posted in your FB page regarding the Rampage campaign... we need sewers ;-) Unless off course you're planing to release them in another campaign!
If you are keen to see the Beta Roofs please email me firstname.lastname@example.org.
Looking forward to seeing the roofs!
@Frank, yes we have the roofs in progress, they clip togeather like the walls.
Just want to give some feedback on the Rampage system test items:
I printed some items in 100% scale and some in 60%. Both were done with .2mm layer height and they printed perfect. It is so much fun to play around with them and build your creations. Feels a little bit like Lego.
I can't wait to see what you will bring up for the new system!
I hope there will be roofs too? And perhaps a way to clip different levels together?
@Printable Scenery - would you consider making some race-based terrain in the future? Such as an Orc Hut, Elf Terrace, or an Dwarf Brewery?
Hi Ken, please email me email@example.com. I'm sending out some more today.
I'd love to help beta test if you need anyone else :)
@Michael, I sent few out this week and will send some more tomorrow, I'll make sure you get one.
So not everyone who requests the Beta Rampage will get it?