Project image
)}
DKK 29,965
pledged of DKK 299,500pledged of DKK 299,500 goal
13
backers
Funding Unsuccessful
The project's funding goal was not reached on Tue, May 31 2016 10:00 AM UTC +00:00
DKK 29,965
pledged of DKK 299,500pledged of DKK 299,500 goal
13
backers
Funding Unsuccessful
The project's funding goal was not reached on Tue, May 31 2016 10:00 AM UTC +00:00

About

What is PowerAxl?

PowerAxl is a bicycle power meter. It gives the rider the effect in watts that is being put into the pedals. The measurement is done on the left side by inserting a short axel between the pedal and pedal arm. For symmetry a dummy axel can be inserted in the right side.

Visit our web site for more information about PowerAxl: https://www.poweraxl.com/

Why is power of interest to cyclists?

Power is of interest to bicycle riders because it is a better metric than e.g. pulse rate which was previously used. Power does not lag like e.g. pulse rate does. When you push harder your watts will increase immediately unlike your pulse rate which will increase after some time. Also a rider’s power does not change as much as pulse rate with sickness, sleep, eating, recovery etc. Not having to compensate for these changes makes it an easier and more precise metric to use. Because of this power is a better metric that e.g. pulse rate.

With power the bicycle riders get the tool for training as efficient and precise as possible thereby improving their performance. Also using power during competition the rider can cycle at optimum performance thereby increasing the chances of winning.

What’s different about PowerAxl?

The PowerAxl power meter is different from the power meters currently on the market because it is a universal power meter. It is universal because it is compatible with all frames, cranks, pedal arms, pedals and computers on the market. This means that you can use this power meter on all your bicycles. With the PowerAxl power meter you only need one power meter for all your bicycles: road bike, MTB, TT bike etc.

Because it is compatible with all bicycle components you get complete freedom in choosing the components on your bicycle. You do not have to make any compromises. Current power meters on the market will limit your choice in pedals, pedal arms or cracks and maybe even computers. PowerAxl is different because you only need one power meter and it gives you:

How to use it

You use the PowerAxl power meter in the same manner as other power meters:

   1. Mount it on your bicycle

   2. Configure it using the buttons

   3. Pair with your computer

   4. Do a calibration from your computer

   5. Start cycling

To mount the PowerAxl power meter on your bicycle simply remove the pedals from the pedal arms, mount the axels in the pedal arms, re-mount the pedals in the axels and mount the plastic housing on the pedal arm.

To configure the power meter insert the battery and push the buttons until you have the setting that matches you bicycle. The two settings needed are the length of the pedal arms and the width of the pedals.

How to pair and calibrate from your computer varies depending on the computer. Your computer user manual will describe how it is done on your computer. Make sure your computer has ANT+ and power support.

Now you are ready to start cycling and will get power values in watts on your computer.

Are there any limitations?

Not to our knowledge. The only requirement is 9/16” threading on your pedal arms and to our knowledge this is standard on all pedal arms.

Features and specification

  • ANT+ compatible
  • Battery CR2032
  • Power range 0 – 2500 watt
  • Cadence range 30 – 240 RPM
  • Two button configuration
  • Compatible with all frames, cranks and pedals
  • Compatible with all ANT+ bicycle computers that support power
  • Standard threading 9/16″

What’s included?

  • 1 axel (15mm) with plastic housing (left side)
  • 1 dummy axel (15mm) (right side)
  • 3 sets of rubber rings sizes 16, 20 and 24mm in diameter
  • 1 set of adapters for 8mm hex wrench
  • 1 CR2032 battery
  • Users manual

Test and verification

The PowerAxl power meter has been tested and verified both against theoretical values and against other power meters on the market. The testing has been performed with different levels of power to verify that the measured power is correct at different power levels. Below is shown a test run between PowerAxl and another power meter currently on the market. The blue color is PowerAxl the red color is another power meter.

Tests against other power meters on the market show equal performance in both power values and cadence.

Why do we need you?

We need your help to bring this product to the market. The design of the product has been completed: axels, plastic housing, electronics etc. Prototypes have been made and the concept and design has been verified. We have been testing the product extensively for over half a year now and will continue to do so moving forward.

We and this product are ready to go from working prototype to production and sale and we need your help to do it.

Risks and challenges

There is low risk in this project since many of the risks have been eliminated during the development and testing of prototypes. This work has also eliminated many of the challenges since they have already been overcome.

The challenges left are associated with production and regulatory approval. The individual components are made by subcontractors so the production challenge lies in efficiently assembling, testing and calibrating the units. This is primarily a matter of up-scaling the work done on the prototypes.

The measurements needed for regulatory approvals will be done by laboratories paid to do the measurements. We do not expect any problems getting these approvals since we are using standard solutions in the affected areas but you never know until the measurements have been made. If a problem is revealed in the measurements we feel comfortable that the design can be adjusted to fulfill the regulatory requirements.

Learn about accountability on Kickstarter
Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge DKK 2,995 or more About US$ 445

    One PowerAxl power meter with the items necessary for installation included.

    Notice the 500DKK discount and free shipping for the early birds.

    Less
    Estimated delivery
    Ships to Only certain countries
    Limited 10 backers
    DKK

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge DKK 3,495 or more About US$ 520

    One PowerAxl power meter with the items necessary for installation included.

    Less
    Estimated delivery
    Ships to Only certain countries
    0 backers
    DKK

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (54 days)