Use this space to cheer the creator along, and talk to your fellow backers.
Have a question?
you took our money, to advertise another product, that is very sad :(
Did you read the entirety of the previous update? PODO Labs said that the new PCBs were being created and the plastics tooling redone to fit, and that they expect to begin assembly this month. Based on previous updates, if they get the PCBs in-house in the next week or two, then shipments to backers should begin by late October or early November.
Really hoping that there's a new update coming soon letting us know when we should be expecting to receive these things!
@Adrian It's OK. Hope all we would receive the rewords ASAP.
"While our production team focuses on managing the factory for Jack, our design team is eager to finally show you our new creation, Belle!"
Copied and pasted straight from the August 17 update. Podo Labs is more than one person, and more than one team, and they can focus on more than one thing at a time. What would the design team have to offer at this point in the process? It's in the production team's hands now. Not to mention, from what the updates on Belle are looking like, they haven't even started real progress on making the product yet - they've just put up a page, and some PR person is answering questions. Be patient. Things happen that are out of anyone's control. If you want one of these that badly, go to Best Buy and get an off-brand one.
Look at the project updates.
Does anybody receive the rewords?
I'm a EARLY BIRD backer but I did NOT receive anything, even tracking number!
Can the creator advise an update on the progress and a estimate of delivery?
I know there sometimes could be some delay in the development or production of a new product, but you have received our payment and support. It's your responsibility to keep your supporters informed. It's extremely offensive and irresponsible to start a new project and actively spend time there.
If the creator continue to do nothing here, I think supporters here should comment on the new project to keep others from suffering and report to KS.
Following is the creator's another new project:
Oh yeah.. I totally forgot how ks works... Doh
You still haven't responded to my message/comment yet. HOPELESS AND THUGS are the right words for you guys.
Adrian - doesn't cost a buck till it is successfull. Pledge a buck, comment, cancel pledge.
RL. Sure. Thats because they want to keep the potential backers in a positive mood. As soon as the cash changed its posession, boom, gone with the wind.
Would love to hear update on this product. As much as I appreciate the reason for the delay and the updates, I'm still on the edge on when I would actually receive the product. Any updates on when the final delivery date will be?
What is the progress on the Jack, it had been months since the delivery date was promised, do hope that the product is worth the wait, can you guys please work on completing this first project before moving onto another one. Put belle on hold until you have got Jack made to the correct specs and ship to your customers like myself who have backed the project and are eagerly awaiting for the Jack product.
Thought about chipping in on the new project page, but it'd cost a dollar. So I thought naaaaaa. :)
We should hope that it's because this project is in mass production mode and there's not much left to do. Hence they focus on the next project.
Fingers crossed lads.
If someone wants for an update, may be try to post on their new project page, they reply everyday over there.
Would you please send any update on the progress?
I really don't understand why u guys take so long to build this stupid thing, it isn't even some new technology , they are simple and sold every where !
Read the Project Updates.
hi PODO LABS,
I haven't receive the product, and never answer my messages. When i can receive the product? Anyone?
@ Jack - i was going to buy that RA light strip - did you get yours? I"m still thinking about it for biking to work -would love to hear what you think of it!
I find it really frustrating that you're spamming the backers of your last project when you're 3 months late already on it. Why would I fund something else when you're not making good on the first?
Battery can last for how many hours?
@creator why don't you guys report jackster?
Man so many worry worts. Calm down and bed patient. I backed the RA led magnetic light strip and it didnt come until about a month ago. Some products take time, I would've been very surprised if this product didnt encounter any kinks. PODO pay no mind to the ones complaining, it seems that a few assume KS is Amazon.
Dang people calm down. Everyone seems to seem to have a dearth of common sense and an overly developed sense of entitlement.
Seems the communication has been pretty straightforward; good and bad. Overall only a couple of months late? Ok. This is a small team working hard. I've never seen a KS that wasn't at least a bit late. Everyone crying about not receiving their units should go look at many KS campaigns where the product isn't delivered. Or is years late.
This creator has delivered before, made a well designed and needed product. Additionally has another product in the chute. Obviously not a campaign or company meant to fleece the public.
Before anyone posts some complaint about not getting any updates,please at least READ the updates.
I truly hope that every single complaint that comes up is followed with a sincere Thank You when their product is delivered.
I haven't received my product. Can someone let me know when it will be delivered? It's been two months now since the estimated delivery.
Just saying PLUB too much now! :'~(
Yeah, like you said, the pairing function is pretty neat, and the PLUB doesn't look anywhere near as good as this, PLUB looks like it's made of that kids' play foam! :D
@ The Sith - I saw the PLUB too, but the idea of syncing more than one jack wirelessly is a feature that I wanted. Essentially creating a wireless audio splitter so multiple people can listen to the same audio at the same time without delay. If PODO Labs can deliver that, as they stated during the campaign, I will be extremely happy and less concerned with the manufacturing delays that have occurred.
Woot! Comment number 1500!! ;D
Tay seem not to care about the guys who PAID for the campaign!
Lol at launching another product while they haven't delivered this one. Why would I give you more money when you can't deliver my initial investment?
Anyone seen the PLUB campaign? Looks pretty nifty & is utterly plug n play!
I think you mentioned you were going to offer free silicon case as a compensation for the delay - I've already ordered a separate silicon case and paid for it too - can I get a refund for the silicon case I paid for? There's no point in having 2 silicon cases. Please advise.
Kickstarter is not a just retail business site. There will be struggles when you are making a project which were accepted by backers (not customers ) i am very happy about your new projects and will follow new ones too.
This company needs to get their priorities together. It's kind of sad to read that so many people are complaining about your own products and your customer support. Are yall even doing anything about those customers and products, or do yall just forget about them?
Also, how can we be sure that we will get the best product from you guys with high-quality customer service and product service, and not like what had happened with your camera product?
Regarding Apt-x, which one does the Jack support? Is it low-latency?
Don't worry guys, just stick with it, they've made well reputated products in the past and are still, so just hang in there another couple of months, and besides, none of the other Bluetooth adapters look THIS good!
@M Newhouse I saw the Jackster a few days ago, I will say I think this Jack project will turn out being a lot more slick in design and hopefully be a great product.
Also for everyone else electronics always seem to get little bumps in the road and the guys here have been doing a great job at giving us updates as to some small companies who have ignored all of the comments after the kick starter has ended. I look forward to this and I hope that the rest of the assembly is easy sailing.
I'm disappointed that you offer the same price on Indiegogo for pre-ordering jack as you offered as exclusive Kickstarter price. Can you please explain why you offer exclusive prices to backers and give the same prices to non-backers?
I'm a little disappointed with the delays they have had and prior to even finishing production of a project in process they started a new Kickstarter campaign. Based on their first two projects comments (cameras), I'm starting to get nervous about the quality of the end product of this campaign.