Share this project

Done

Share this project

Done
This tiny device brings Bluetooth capability to all of your audio devices. It even lets you sync headphones with a friend!
This tiny device brings Bluetooth capability to all of your audio devices. It even lets you sync headphones with a friend!
This tiny device brings Bluetooth capability to all of your audio devices. It even lets you sync headphones with a friend!
16,019 backers pledged $804,268 to help bring this project to life.

Use this space to cheer the creator along, and talk to your fellow backers.

Have a question?

Only backers can post comments. Log In
    1. Missing avatar

      Koki Okada on September 8

      @Adrian It's OK. Hope all we would receive the rewords ASAP.

    2. A on September 8

      "While our production team focuses on managing the factory for Jack, our design team is eager to finally show you our new creation, Belle!"

      Copied and pasted straight from the August 17 update. Podo Labs is more than one person, and more than one team, and they can focus on more than one thing at a time. What would the design team have to offer at this point in the process? It's in the production team's hands now. Not to mention, from what the updates on Belle are looking like, they haven't even started real progress on making the product yet - they've just put up a page, and some PR person is answering questions. Be patient. Things happen that are out of anyone's control. If you want one of these that badly, go to Best Buy and get an off-brand one.

    3. Adrian Martin on September 8

      Kiki,
      Look at the project updates.

    4. Missing avatar

      Koki Okada on September 8

      Does anybody receive the rewords?
      I'm a EARLY BIRD backer but I did NOT receive anything, even tracking number!

    5. Missing avatar

      Shihpan(James) Chuang
      Superbacker
      on September 7

      Can the creator advise an update on the progress and a estimate of delivery?

      I know there sometimes could be some delay in the development or production of a new product, but you have received our payment and support. It's your responsibility to keep your supporters informed. It's extremely offensive and irresponsible to start a new project and actively spend time there.

      If the creator continue to do nothing here, I think supporters here should comment on the new project to keep others from suffering and report to KS.

      Following is the creator's another new project:
      https://www.kickstarter.com/projects/podolabs/belle-0…

    6. Adrian Martin on September 7

      Gas,
      Oh yeah.. I totally forgot how ks works... Doh

    7. Aristides on September 7

      You still haven't responded to my message/comment yet. HOPELESS AND THUGS are the right words for you guys.

    8. i hate buying gas
      Superbacker
      on September 6

      Adrian - doesn't cost a buck till it is successfull. Pledge a buck, comment, cancel pledge.

    9. George N. on September 6

      RL. Sure. Thats because they want to keep the potential backers in a positive mood. As soon as the cash changed its posession, boom, gone with the wind.

    10. Missing avatar

      Dave Erickson Fuentes on September 6

      Would love to hear update on this product. As much as I appreciate the reason for the delay and the updates, I'm still on the edge on when I would actually receive the product. Any updates on when the final delivery date will be?

    11. Missing avatar

      Pratik Babla on September 6

      What is the progress on the Jack, it had been months since the delivery date was promised, do hope that the product is worth the wait, can you guys please work on completing this first project before moving onto another one. Put belle on hold until you have got Jack made to the correct specs and ship to your customers like myself who have backed the project and are eagerly awaiting for the Jack product.

    12. Adrian Martin on September 4

      Thought about chipping in on the new project page, but it'd cost a dollar. So I thought naaaaaa. :)

    13. Missing avatar

      Alastair on September 3

      We should hope that it's because this project is in mass production mode and there's not much left to do. Hence they focus on the next project.

      Fingers crossed lads.

    14. Missing avatar

      RL
      Superbacker
      on September 3

      If someone wants for an update, may be try to post on their new project page, they reply everyday over there.

    15. Missing avatar

      Michal Chlewicki on September 3

      Would you please send any update on the progress?

    16. Missing avatar

      Red Leung on September 1

      I really don't understand why u guys take so long to build this stupid thing, it isn't even some new technology , they are simple and sold every where !

    17. Adrian Martin on August 31

      @Ganda
      Read the Project Updates.

    18. Missing avatar

      Ganda Hendranata on August 31

      hi PODO LABS,
      I haven't receive the product, and never answer my messages. When i can receive the product? Anyone?

    19. DPniRadhallaigh on August 31

      @ Jack - i was going to buy that RA light strip - did you get yours? I"m still thinking about it for biking to work -would love to hear what you think of it!

    20. Missing avatar

      Jonathan on August 28

      I find it really frustrating that you're spamming the backers of your last project when you're 3 months late already on it. Why would I fund something else when you're not making good on the first?

    21. Missing avatar

      Sean Xian on August 28

      Battery can last for how many hours?

    22. Annie
      Superbacker
      on August 27

      @creator why don't you guys report jackster?

    23. Missing avatar

      Jack on August 27

      Man so many worry worts. Calm down and bed patient. I backed the RA led magnetic light strip and it didnt come until about a month ago. Some products take time, I would've been very surprised if this product didnt encounter any kinks. PODO pay no mind to the ones complaining, it seems that a few assume KS is Amazon.

    24. Missing avatar

      Roger Smith
      Superbacker
      on August 25

      Dang people calm down. Everyone seems to seem to have a dearth of common sense and an overly developed sense of entitlement.

      Seems the communication has been pretty straightforward; good and bad. Overall only a couple of months late? Ok. This is a small team working hard. I've never seen a KS that wasn't at least a bit late. Everyone crying about not receiving their units should go look at many KS campaigns where the product isn't delivered. Or is years late.

      This creator has delivered before, made a well designed and needed product. Additionally has another product in the chute. Obviously not a campaign or company meant to fleece the public.

      Before anyone posts some complaint about not getting any updates,please at least READ the updates.

      I truly hope that every single complaint that comes up is followed with a sincere Thank You when their product is delivered.

    25. Carl De Villa on August 25

      I haven't received my product. Can someone let me know when it will be delivered? It's been two months now since the estimated delivery.

    26. The Sith on August 25

      Just saying PLUB too much now! :'~(

    27. The Sith on August 25

      Yeah, like you said, the pairing function is pretty neat, and the PLUB doesn't look anywhere near as good as this, PLUB looks like it's made of that kids' play foam! :D

    28. Missing avatar

      Tim Fair on August 25

      @ The Sith - I saw the PLUB too, but the idea of syncing more than one jack wirelessly is a feature that I wanted. Essentially creating a wireless audio splitter so multiple people can listen to the same audio at the same time without delay. If PODO Labs can deliver that, as they stated during the campaign, I will be extremely happy and less concerned with the manufacturing delays that have occurred.

    29. The Sith on August 25

      Thanks! xD

    30. Adrian Martin on August 25

      Sith,
      Congrats! :)

    31. The Sith on August 25

      Woot! Comment number 1500!! ;D

    32. The Sith on August 25

      Tay seem not to care about the guys who PAID for the campaign!

    33. Mac Jones
      Superbacker
      on August 25

      Lol at launching another product while they haven't delivered this one. Why would I give you more money when you can't deliver my initial investment?

    34. The Sith on August 24

      Anyone seen the PLUB campaign? Looks pretty nifty & is utterly plug n play!

    35. Aristides on August 24

      I think you mentioned you were going to offer free silicon case as a compensation for the delay - I've already ordered a separate silicon case and paid for it too - can I get a refund for the silicon case I paid for? There's no point in having 2 silicon cases. Please advise.

    36. Missing avatar

      Fethullah on August 24

      Kickstarter is not a just retail business site. There will be struggles when you are making a project which were accepted by backers (not customers ) i am very happy about your new projects and will follow new ones too.

    37. BLim on August 23

      This company needs to get their priorities together. It's kind of sad to read that so many people are complaining about your own products and your customer support. Are yall even doing anything about those customers and products, or do yall just forget about them?

      Also, how can we be sure that we will get the best product from you guys with high-quality customer service and product service, and not like what had happened with your camera product?

    38. Missing avatar

      davinche on August 23

      Regarding Apt-x, which one does the Jack support? Is it low-latency?

    39. The Sith on August 23

      Don't worry guys, just stick with it, they've made well reputated products in the past and are still, so just hang in there another couple of months, and besides, none of the other Bluetooth adapters look THIS good!

    40. Craig Friedman on August 23

      @M Newhouse I saw the Jackster a few days ago, I will say I think this Jack project will turn out being a lot more slick in design and hopefully be a great product.

      Also for everyone else electronics always seem to get little bumps in the road and the guys here have been doing a great job at giving us updates as to some small companies who have ignored all of the comments after the kick starter has ended. I look forward to this and I hope that the rest of the assembly is easy sailing.

    41. Missing avatar

      Stefan Knöchel on August 22

      I'm disappointed that you offer the same price on Indiegogo for pre-ordering jack as you offered as exclusive Kickstarter price. Can you please explain why you offer exclusive prices to backers and give the same prices to non-backers?

    42. Missing avatar

      Tim Fair on August 22

      I'm a little disappointed with the delays they have had and prior to even finishing production of a project in process they started a new Kickstarter campaign. Based on their first two projects comments (cameras), I'm starting to get nervous about the quality of the end product of this campaign.

    43. Missing avatar

      Audrey Koziol on August 22

      Guys, they will not refund anything you bought. This was made very clear before the campaign ended. If you wanted to be able to get a refund, that you shouldn't have backed this product.

    44. Adrian Martin on August 22

      Guys... This is Kickstarter. Things get fluid.

    45. Missing avatar

      huangkurt on August 22

      Hello, can you tell me what the process is for cancellation if I can get a full refund? Thank You. This is taking way too long.

Show older comments