The UL Process is Finished!
The UL process is finally finished! It took a little longer to dot the I’s and cross the T’s, but we are finally done. With the last documents... Read more
Final Inspection Certifications are In!
The tests from the inspection went well (even though it took longer than we hoped to receive the results)! Now, we are filling out the final forms and... Read more
UL Factory Inspection Completed
We had the Initial Product Inspection (IPI) in our Shenzhen manufacturing facility yesterday morning. The purpose of the IPI is for UL to physically confirm that the product... Read more
ONO is UL Certified!
Great news! We passed the UL FCC tests, and the printer is now fully certified! You can find the certificate and the full report below.
Now that... Read more
Latest Printers at UL
After a few weeks of testing, redesigning, and retesting, we have fixed the emissions problems we were having! We managed to have the printers tested at the same... Read more
FCC Test Report
As many of you requested, here are the results of the UL tests, showing where we fell out of the threshold for the FCC standards. We understand your... Read more
FCC and New Phones
We heard back from UL again on the latest test. Unfortunately, the printers failed the FCC test by just 5%. This is a hard blow to us, and... Read more
Two Down, Two to Go
Moving forward on the UL front, we’ve had some good updates this past week.
First, we were told that we passed the UL Safety test. This isn’t surprising,... Read more
The Boards are on Their Way to UL
We made it through the next step, and the printers are on their way to UL as you read this!
Over the last couple of weeks, we... Read more
Pre-Production Boards Ready for Testing
The first group of pre-production boards is finished and being tested.
Preliminary tests were carried out on a batch of boards in our factory in China for... Read more
We Found a Solution to our Major Board Issues
After long weeks of silent work we can finally give you the news we were hoping for.
Original Design Flaws
From the very beginning,... Read more
New Board Development
We have an update on the boards, and it’s not what we had hoped.
After receiving more new Androids and iPhones, we ran tests on... Read more
PCB Good News!
We have some good news! Last week, we ran the tests on the newest board, and they went very well! We tried it with the latest app modifications,... Read more
We have been working on fixing the issues with the board: our biggest struggle is trying to keep the balance between the precision and affordability we aimed at... Read more
Apps, Printing Film, and Certification
The iOS Alpha test went very well! Thank you to all 400 backers who participated in the testing and were able to help us narrow down a few... Read more
Yesterday, the iOS Beta version of the ONO app was approved by Apple! We had a very successful run with the Android Alpha tests and we're looking forward... Read more
App Testing Update
We received so many requests from all of you to become an Alpha tester that choosing only 100 would have been too limiting! So we decided to select... Read more
ONO Opening Pre-Orders
As production has been running smoothly and final glitches have been taken care of, to kick start the weekend at the Maker Faire Bay Area, we’ll be accepting... Read more
PCB and App Update
The tests on the first 100 boards went great! Now we have to wait for UL to complete their compliance tests, which shouldn’t take too long. Once they... Read more
We have updates on the boards! After the positive results from the tests we did with the first prototypes after the last update, we went ahead and deployed... Read more
New PCB Boards
Since the last update, we have been working nonstop on the new PCB boards. We came up with a solution very quickly and had the first production batch... Read more
We’ve run into a small last-minute issue that involves some of our electronics boards. While conducting our routine quality checks, we found that an unusually high number of... Read more
Deliveries Start on March 23!
With the certifications in hand, we were finally able to engrave all the logos on the printers. We are now confident that there will be no issues with... Read more
As promised in the last update, here is a video of ONO printing the reticular structure, taking up almost the full volume (120 x 66 x 50 mm).... Read more
Shipping and New Resins
We finally received all the official certifications for the printer in the mail this week!
We already have all the components laid out in our Shenzhen facility, and... Read more
ONO at Worlds Fair Nano This Weekend!
On January 28th and 29th, we will showcase ONO at the Worlds Fair Nano, at Pier 70 in San Francisco’s Dogpatch neighborhood.
This is one of the biggest... Read more
Good news everyone!
On Wednesday, UL finally published the certifications we’ve been waiting for! This means that the printers are certified as being safe and reliable. You can find them... Read more
Web App Launch FAQs
Hey guys! We’ve been seeing a lot of comments and questions lately on different parts of the Web App. Here are answers to some of the more common ones.
1.... Read more
THE WEB APP IS NOW LIVE!
You are now able to access the ONO Web App!
Go to web.ono3d.net and create an account using your kickstarter email. This way, we will make sure... Read more
ONO Web App
With all the questions we are receiving, we decided to push up our update and get you some more details on the Web App.
We want to reassure... Read more
Shipping and Web App
So far, we’ve assembled and run thorough quality checks... Read more
Final Steps Before Shipping
It was great to meet some of you at the New York and Rome Maker Faires! We look forward to meeting even more at the closing in... Read more
ONO at World Maker Faire and ZBrush Summit!
Come join ONO this weekend at the World Maker Faire in NY and the ZBrush Summit in LA!
ONO will be showcasing the printer at this year’s World... Read more
Shipping Address: 2 Days Left!
There are 2 days left to complete your shipping address! As we mentioned in our last update, we are finalizing everything in preparation for shipping in October. Please... Read more
Shipping Address Deadline
After hearing back from suppliers and manufacturers, we have a better idea of when we will be able to start shipping Kickstarter rewards. We estimate that packages will be shipped... Read more
Rebranding and Moving Forward
Part of launching a successful product is learning how to roll with the punches. We were faced with an unexpected situation and we made the decision that was best for... Read more
Design, Manufacturing, and More!
It has been a very productive month and we wanted to share what we have been working on!
In our previous updates we mentioned a redesign... Read more
Survey: 2 Days Left!
We received a handful of questions about the BackerKit survey and we wanted to post an update to answer your questions before the deadline.
There are... Read more
Remember Your Survey!
Just a friendly reminder to complete your BackerKit surveys. The deadline for surveys is June 22, 2016, then our team will lock down surveys for processing.... Read more
Highlights from the Month!
The past month has been full of activity! Our team has been burning the midnight oil since our last update and we are coming up for air to share the... Read more
OLO Production Update + BackerKit Surveys news
We are moving forward with production!
Since the last day of fundraising, we have moved into production mode working on the project from all possible perspectives. Over the past two... Read more
Thank You For Your Support!
The Kickstarter campaign for OLO 3D reached its last day of fundraising with an extraordinary result and we want to say thank you for all of your support!
The response... Read more
OLO + Gravity Sketch Love Android Too!
Gravity Sketch will be available for Android OS in September, and free to all of our Backers using the Android OS. Gravity Sketch is an app that turns doodles and... Read more
Gravity Sketch Joins OLO: An added gift for backers, an easy way to make your own 3D models!
OLO and Gravity Sketch have teamed up to unleash the full 3D power of your smartphone; from sketching to printing, all on the same device!
Gravity Sketch makes 3D modeling... Read more
OLO Retail Price Announcement!
We want to congratulate all of our Backers! OLO’s MSRP, the price OLO will retail for once it is in stores, will be $129. Our Backers have secured a great... Read more
Thank you 2,000,000 times over!
We are so grateful to all of our Backers for making our OLO campaign such an astounding success! We reached $2,000,000 today! Thank you! Thank you to all of you... Read more
We’ve been listening to our many Backers who have taken the time to share their feedback with us both in the comments and via private messages, and we’ve made a... Read more
OLO Loves South Korea!
We have added South Korea to the list of countries we ship to. We hope that the many South Koreans who have inquired about backing our campaign are delighted with... Read more
OLO - 42 mm EGG Closeup
lenght: mm 42 / dia. mm 20
speed: 28 sec / layer
between: 4 sec / layer
thickness: 0.1 mm / layer
print time: 3h 53m
Inside OLO: 20 FAQ's Deeper!
We have now responded privately to over a thousand comments, and we have just finished updating the FAQ and added 20 new questions.
As always, we are so... Read more
OLO - Update on your Comments
You have been sooo many to ask questions these days: we have received over 3000+ messages on Kickstarter alone. So we have decided to answer each of you,... Read more
ONE MILLION THANKS!
1,000,000 Thanks to all of our Backers for all your incredible support.
In only 5 days the OLO campaign has gone above and beyond our expectations.
Your support continues to... Read more
OLO DayLight Resins
We have received several comments asking about possible violation of patents held by Photocentric Ltd. We immediately reached out to them for a comment on these concerns
OLO + BackerKit
OLO is happy to announce its partnership with Backerkit to make ordering add-ons easier.
Thanks for your patience! The FAQ is now posted and we will continue to answer individual questions. We appreciate your support!
The OLO Team
Fake OLO Campaign on Indigogo
We wanted to inform you that this morning we have discovered a fake OLO account on Indiegogo. We want to be clear that campaign is a fraud. We... Read more
Answering your questions
Thanks again for making the campaign such a success! We are receiving many questions and suggestions, and we could not be happier for all the intrerest. We promise to respond... Read more
A Big Thanks from the OLO Team!
After just 33 minutes on Kickstarter, OLO has surpassed its goal of $80,000 and continues to rise. We have no words to thank all of you who have made this... Read more