Manufacturing Update #37
We hope that you have been well!
We wanted to give you a more updated version of our shipping timeline in this biweekly update.
As it stands now…... Read more
Manufacturing Update #36
We're glad to tell you that we will hit the goal mentioned in our previous update, shipping to backer 3000 by the end of today. If you are... Read more
Manufacturing Update #35
As mentioned in our previous update, we will begin releasing updates biweekly. We hope that this will provide a clearer insight into our progress.
Our production rate is... Read more
Manufacturing Update #34
We wanted to cut straight to the chase and address a shift in our timeline since our last update. You can see it here below:
After our last... Read more
Manufacturing Update #33
We hope you’ve been having a good summer!
As you may have read in our last update, we included a projected timetable for the remaining Kickstarter orders. We... Read more
Manufacturing Update #32
Thanks for hanging tight with us as we solidify some details on our end before publishing another update.
As you’ll remember from our last update, we announced that... Read more
Manufacturing Update #31
We hope you’ve been well!
Our apologies for missing an update for March; we wanted to nail down some details before we released it.
We don’t want to... Read more
Manufacturing Update #30
We hope you’ve all been well!
We want to dive in and cut right to the chase.
Over the past month, we’ve been in production mode in our... Read more
Manufacturing Update #29
First off, we want to start by saying thank you again for your continued support and patience.
As you may have read in the last update, we had... Read more
Manufacturing Update #28
Happy new year, everyone!
We hope you all had a safe and fun holiday season! We hope you’re all getting back into the grind of things, as we do the... Read more
Manufacturing Update #27
We hope you all are having a fantastic Christmas, happy holidays, and an all around delicious time with your family and friends!
We’d first like to express our... Read more
Manufacturing Update #26
We hope the winter cold hasn’t been too bad for you! It’s been quite chilly for us over here in San Francisco.
As you may remember from our... Read more
Manufacturing Update #25
Since Thanksgiving is tomorrow, we wanted to give you a quick update before the holiday.
We are currently still on track to start shipping before the next update!... Read more
Manufacturing Update #24
It’s never been busier here in the Nomiku office! We’re doing small scale builds, and very pleased with the results so far. Check it out:
We’re super excited... Read more
Manufacturing Update #23
Happy Halloween! Fortunately, this post is not one that should cause you any additional frights. The parts are coming off the tools almost completely to spec and are... Read more
Manufacturing Update #22
We’re getting more excited every day as we approach our shipping date, and we’re sure you are as well--thank you so much again for your never-ending patience and... Read more
Manufacturing Update #21
As frustrating as it is to have delays, we unfortunately have found ourselves encountering one that we weren’t able to overcome despite our best efforts. After our last... Read more
Manufacturing Update #20
We hope everything is going well!
Thanks to those of you who have filled out the survey! For those who haven’t yet, here is the pantone color for... Read more
Canadian Backers! Please read.
Hello Canadian Backers,
We will be shipping Canadian WiFi Nomikus at the same time as our domestic ones. Sorry for the confusion with the form we sent out recently.
Please... Read more
Manufacturing Update #19
We hope you’re looking forward to your labor day weekend! We accelerated our update a little bit to address a few of your comments about a competing wifi... Read more
Manufacturing Update #18
We can’t believe how fast the summer is passing by!
As we mentioned, our critical path is the tools for the injection molded plastics. We’ve been waiting on... Read more
Manufacturing update #17
These two weeks marked a big milestone for us in getting the rest of the tooling POs placed. This means we can start counting down the weeks until... Read more
Manufacturing Update #16
As promised in the last update, we’ve started our design lock and placed the PO for the first tools! We’ve also completed the rest of the DFM changes,... Read more
Manufacturing Update #15
We hope you had a merry Fourth of July! Things are buzzing in the Nomiku office as we have started locking down our design and submitting final drawings... Read more
Manufacturing Update #14
We hope your summer is going well! We’ve been heads-down focused on getting the design locked and ready for tooling. At this time, we’re still on track to... Read more
Manufacturing Update #13
We know it has been frustrating to see delays trickle in over the last few updates. We share your frustration, and deeply apologise that our estimates of how... Read more
Manufacturing Update #12
We hope you’re having a wonderful springtime. Indeed, we are mostly indoors slamming away at prototypes and CAD, getting everything in line for tooling lock. We completed initial... Read more
Manufacturing update #11
Despite a heroic effort, we have not been able to start our EVT1 this week. We froze our design and sent out the orders for parts, but we... Read more
Manufacturing Update #10
We’ll get the tough part out of the way first: we ran into an issue with our new pump mounting causing the circulation to be reduced. Tiffany has... Read more
Tender and Manufacturing Update #9
We’ve had a busy two weeks! We finally moved into our new factory and office space in San Francisco. As you can see, we're loving it and starting... Read more
Manufacturing update #8
We want to first of all, say thank you for all of your support and love on Tender! We truly love to see what you’re cooking, and we’ve... Read more
Tender Update and Manfacturing Update #7
We’re really excited to report that our debut app, Tender, is now available for download in the app store! (You can even see us featured in this TechCrunch... Read more
Manfacturing Update: #6
We hope you’re well! Since our last update, we’ve been super busy here at Nomiku HQ. First and foremost we’ve been pushing on getting hardware ready for design... Read more
Manufacturing update: #5
Happy Valentine’s Day! We’re feeling the love with all the warm weather here in San Francisco (hopefully we can share some with those of you on the East... Read more
Manufacturing update: #4
Happy 2015, and upcoming year of the goat!
We wanted to give you an update on our progress so far with Wifi-Nomiku. Here is our general roadmap for... Read more
Manufacturing update #3
Happy holidays and new year to all our awesome backers! We’ve been sharing what we’re making on the blog, and we’d love to see what you’ve been cooking--- tell us... Read more
Manufacturing Update #2
Happy Thanksgiving! We're grateful every day for your support.
Our main challenge has been that our main design lead and cofounder, Bam, has been sick and unable... Read more
Manufacturing Update #1
Thank you all for being with us on our journey to create the first ever WiFi sous vide machine as we continue the manufacturing process in our homebase... Read more
Thank you! Here are the next steps.
We did it! Thanks to your generous support, we not only more than tripled our funding goal but broke our $750K stretch goal! That means we'll be having different colored... Read more
Last days! Spread the word about Nom!
We have only a few days left until the campaign ends, thank you so much for being a backer and supporting us in every sense of the word.... Read more
500K Milestone Achieved! Stretch goals get closer each time you share, thank you!
Here are some ways to help, share our project (http://bit.ly/sous-vide-nomiku) on Facebook, write about why you backed us, and tag at least five friends who share your passion for great... Read more
International Noms! 240V update
Hello International Backers,
Thank you for writing us with your interest for a WiFi Nomiku. We absolutely will make 240V units and have put in a new level at $10... Read more
Thank you! Let's set some Stretch Goals!
Thank you backers! 200K is not an easy goal for any project and you guys shattered it in less than 12 hours.
750K Different knob colors!
We won't... Read more