Beautifully designed, all aluminum body, strongest and smoothest holding clamping mechanism on the market for iPhone and more phones
TO SAY THANKS FOR HELPING US SURPASS THE $50,000 MARK, EACH ULTIMA WILL NOW INCLUDE A FREE ROUND ADHESIVE DISK TO USE ULTIMA IN THE INVERTED POSITION. CHECK OUT THE UPDATES SECTION FOR MORE DETAILS:
NOTE: A SURVEY WILL BE SENT ONCE THE CAMPAIGN FINISHES REQUEST COLOUR CHOICES AND TO CONFIRM ADDED EXTRAS ETC.
UPGRADED INTERNATIONAL SHIPPING:
INTERNATIONAL BACKERS WHO ONLY PLEDGE FOR 1 ULTIMA MAY UPGRADE THEIR SHIPPING BY INCREASING THEIR PLEDGE BY $10. THIS IS HIGHLY RECOMMENDED TO ENSURE ALL PARCELS ARE RECEIVED AND MUCH FASTER. ALL DOUBLE UP PLEDGES AND ABOVE INCLUDE THIS UPGRADED SHIPPING.
ALL ADDED EXTRAS AND UPGRADED SHIPPING MUST BE ADDED TO YOUR PLEDGE BEFORE THE CAMPAIGN TIME FINISHES, THESE CHANGES CANNOT BE MADE ONCE TIME RUNDS OUT. ANY QUESTIONS PLEASE MESSAGE.
Ultima real pics in Black and Silver
ULTIMA DRIVING AND RECORDING TEST
ULTIMA STRENGTH TEST - HOLDS 10KG! (22 pounds)
AppAdvice - "Clearly destined for greatness"
Gear Hungry - "The first to really hit the mark"
Hi and thanks for checking out my project, I hope you'll be as excited as I am knowing that finally there is a quality universal option to mount your beloved and in many cases very expensive smartphone in your car and to do it with style!
THE WORLD'S FINEST UNIVERSAL SMARTPHONE HOLDER FOR THE CAR
This has been a project in the making for over 2 years, now with a working prototype that we feel is just about ready to start moving into the manufacturing stage but we need your help to get there.
The goal was to create the best possible solution to hold a smartphone in a vehicle. It had to be very stylish in design to match todays smartphones and the interior of a car, be of a high quality build, accommodate as many different smartphones on the market as possible (mainly with the iPhone in mind to be used with or without a case) and it also had to be very easy and simple to use.
With a goal to create the world's finest, the bar had to be raised to create a universal as possible but very stylish and most importantly amazingly functional smartphone holder.
The most exciting feature about 'Ultima' is it's intuitive holding mechanism. To open you press and hold the release button then place your phone in the holder and press in the sides till desired hold. Once you press in the holder it cannot be pushed backwards until the release button has been pressed, even if you use force it will not move backwards!
It also does not have measured increments when sliding, basically the more or less you press is dependent on exactly how much you press, giving 'Ultima' the most accurate hold to be found on any universal holder out there!
This technology also eliminates the need for any other accessory needed to mount your phone, so no need for little magnets to stick on the back of your phone, or a certain case to use just to mount your phone. I believe people want more choice, choice to change their case, or even there phone but still be able to use the same holder and not be limited.
Due to it's mostly high grade aluminium materials and intuitive holding design, the costs to manufacture is high, with tooling costs of $40000+ and then manufacturing, assembly and delivery costs for each unit on top of that, not to mention the huge upfront cost already spent to get this far but because we believe in this product so much we will be funding the entire project ourselves which means we can pass on the savings to you to rewards our backers with an amazing price!
'Ultima' is also virtually future proof as you don't need to buy a new holder when you buy a new phone, chances are your new phone will just fit and work and look great too!
WHERE IS THE PROJECT CURRENTLY AT?
We have a fully working prototype that we are currently making small finer adjustments so will be on our final prototype run by the end of March, if all goes well we will be moving straight into tooling and manufacturing which should put us in a very good position to start delivering by June 2012.
REWARDS FOR KICKSTARTER BACKERS
For only $55 you'll receive a first production run of 'Ultima' in your choice of colours silver or black. This includes FREE shipping to the US and Australia with International pledges only $65 including FREE shipping! When released to the public, 'Ultima' will retail for $99 + shipping.
You can pledge for as many as you like at the one low price, just simply multiply your pledge by the number of units you would like such as 3 x Ultima $55+$55+$55=$165 so your pledge amount total would be $165.
Once you make your pledge for multiple 'Ultima's' just message us with your colour choices.
LIMITED EDITION KICKSTARTER GREEN EDITION (100 ONLY)
We think it's important to show this all began from Kickstarter and was done by all of US! so we also have a special limited edition Ultima Green Edition only for Kickstarters while the campaign is running. This will not be available at retail.
If you would like multiple 'Ultima' including the Green Edition, please select the Limited Green Edition pledge and then add your other colours choices, (silver or black) to your pledge amount.
PASSION FOR DESIGN + PASSION FOR MUSIC
We appreciate every backer so you will also receive a copy of the music track I produced for the 'Ulitma' promo video before it's released on iTunes, you will also get a ringtone version too!
HELP US SPREAD THE WORD
You can also help out by LIKING our Facebook page www.facebook.com/nkmos and posting the Kickstarter link on your page
Also it is a HUGE help to let your favourite tech website and blog know about us so feel free to e-mail them for a feature write up.
HERE IS THE SHORT LINK - http://kck.st/wKiSKY
The Facebook page will also be updated regularly with news, pics and video.
We thank you for your support and we look forward to bringing the best experience of using your phone in your car the way it was always meant to be.
ULTIMA - HOLD STYLE WITH STYLE
Yes, the suction cup is replaceable and we will be selling the suction cup as a stand alone part once we have final costs.
Yes, we currently have the option for 2 extra sets of backing and side pads. Just increase your pledge amount by $5 for this kit to be added to your pledge. Kits will also be available from our website www.nkmos.com once Ultima has launched on the market.
We are in the final process of maxing out Ultima's width. We have stretched to 83.4mm which will fit the Note but won't know for sure until we can test with prototyping. Will keep you all updated.
Strong enough to hold 10kg! (22 pounds) check out our test video - http://m.youtube.com/watch…