Share this project

Done

Share this project

Done
Introducing Back to the Future Part II Miniature Desktop Hover Boards just in time for October 21, 2015.
Introducing Back to the Future Part II Miniature Desktop Hover Boards just in time for October 21, 2015.
170 backers pledged $11,143 to help bring this project to life.

About this project

Back to the Future Part II Miniature Desktop Hover Boards project video thumbnail
Replay with sound
Play with
sound

$11,143

170

THANK YOU BACKERS - WE ARE FUNDED! GUARANTEED HOVER BOARDS FOR ALL OF YOU!

.

"I Need to Borrow Your...Hover Board?!"

In the fictional world of "Back to the Future Part II" masterfully created by Director Robert Zemekis, Executive Producer Steven Spielberg, and Screenwriter/Producer/Co-Creator Bob Gale, Marty McFly was on his journey forward in time to the year 2015 where hover boards were as common as skateboards and bicycles. Now that we are approaching that infamous date in reality, everyone is asking, "where are our hover boards?!" Well, we are here to answer those cries! Don't be a Biff; hear us out!

October 21, 2015 - How many times have you seen THIS on Facebook?
October 21, 2015 - How many times have you seen THIS on Facebook?

In honor of the 30th anniversary of the movie, NeoLev Technologies, LLC is thrilled to announce we can celebrate one of the most magical BTTF moments with a little token. Our 1/15th Scale Officially Licensed Back to the Future miniature replica hover boards designed by John Bell are the ultimate BTTF fan's dream come true. Yes, they really do levitate! We had a successful pre-order limited edition campaign with BacktotheFuture.com delighting hard core BTTF fans. The timing is perfect with our goal to make many hover boards (although tiny enough to fit on your desk) available en mass on or before October 21, 2015...the date that we go "Back to the Future!!"

The Flux Capacitor of Things (Techie Talk)

Limited Signature Series from BacktotheFuture.com Pre-Order Campaign
Limited Signature Series from BacktotheFuture.com Pre-Order Campaign

Not only are these boards' uncanny resemblance to the BTTF hover boards as exciting as George McFly upper-cutting Biff’s sleazy grin, but the science and technology engineered by the minds of NeoLev Technologies, LLC is 30 years ahead of its time. Yes, they are very cool.

 project video thumbnail
Replay with sound
Play with
sound

This special Back to the Future edition of the NeoLev Mini Hover Boards is designed to hover in place or move forward and backward in a near-frictionless manner along a base. This track is purposefully designed to be about twice the width of the board and provide superior lateral stability. NeoLev technology uses diamagnetic levitation which is one method for magnetic suspension without the use of control devices, electromagnets, moving parts or materials requiring sub-freezing temperatures. Seeing it levitate up close for the first time is remarkable.

Check out the hover board stripped down to the bone showing off its magic:

Even Doc Brown Needed Fuel Sources (Translation: We Too Need Exotic Materials)

We don't require 1.21 GigaWatts to make these things hover, but we need your help to get the customized rare earth magnets and graphite board materials to make enough for all to enjoy. And since we don't have an almanac from the future to help us with the funding, we need you to back us. Point blank, the BTTF Mini Hover Board has the potential to be coolest working small scale replica in a decade. What's in it for you? Let us tell you about our backer rewards that will have you screaming, "Great Scott!"

Dust Off Your Orange Vests (Rewards)

We are ready for manufacturing and your orders will make it happen! By pre-ordering here on Kickstarter, you will ensure that the miniature hover boards go into mass production. We make each hover board by hand and that takes times and resources. We want to make sure we can offer these on or before October 21, 2015.

The Early Birds who pledge $25 will receive a Marty McFly Back to the Future hover board with 3-1/2" levitation base. Channel your inner Delorean, because these are sure to go FAST.

For those of you who need a little more road to get to 88 MPH, we have 7" and 13" sleek design levitation bases because where we're going, we don't need roads. It's all about the base.

Hardcore Trilogy fans will want to check out our Filmmaker Signature Edition backer rewards showcasing the nostalgia with not one but FIVE hover boards as depicted in the Back to the Future Part II movie. Go Johnny Go! Go! Go!

Since the license with Universal is for the United States only, we have included non-BTTF versions to enjoy the killer technology worldwide.

*** INTERNATIONAL BACKERS: We welcome your involvement! The licensing agreement with Universal Studios only allows these Back to the Future products to be shipped within the United States. Unless you have friends or family with an address in the US, there are non-BTTF products available demonstrating the cool levitation technology ***

                          REWARDS

The Team

Eric Stave – Founder, Engineering
Eric Stave – Founder, Engineering

Eric founded NeoLev Technologies, LLC in 2013. He has a BS degree in Aeronautical and Astronautical Engineering from Purdue University and a MS degree in Mechanical Engineering from Washington University. He has 25 years of experience in engineering analysis and testing, project engineering and technical lead capacities in solid and liquid rocket programs, spacecraft and satellite integration, ground transport vehicles, fighter jet testing, signal processing and instrumentation. Outside of work, he designed and oversaw construction of several residential homes in the mountains of Colorado. He is an instrument-rated private pilot, runner, hiker, and accomplished mountain climber. With a keen interest in history, travel, reading, science, and technical innovation, he has taken on the challenge of creating NeoLev products, and experiments with all sorts of high tech gadgets. As a father of two, he resides in the Sierra Nevada foothills near Sacramento, California. To contact him, please e-mail Eric@neolevtech.com.

David Spilka – Mechanical Design
David Spilka – Mechanical Design

Dave is responsible for Modeling and Drafting NeoLev® prototypes and production units using SolidWorks. Dave has also developed our hardware integration and vendor/supplier databases. He has a BSBIS degree (also an AA in Electro-Mechanical Drafting) and 28 years of experience in Engineering Mechanical Design and Drafting. He specializes in Fixture and Jig design. His diverse career has included work from the Ore Mining field, government DOD projects, military transport design, semiconductor wafer loading equipment and mountain bike design. His most recent 17 years has been exclusively involved in medical applications. He specialized in Artificial Graft and Stent design and their manufacturing and processing equipment. The last 9+ years have been directed toward Knee and Shoulder repair anchor design manufacturing and processing. He presently holds 9 issued US Patents in the medical field. He is an avid mountain biker in the Phoenix area. With his extensive knowledge in the design field and maintaining product lines in manufacturing, we have asked Dave to take on the role of Director of Manufacturing and Quality. He may be reached at his e-mail: Dave@neolevtech.com.

Janice Johnson - Communications
Janice Johnson - Communications

Janice Johnson has a BA in English and a master’s degree in Education, both from National University, Sacramento. She received her journalism training at Walter Cronkite School of Mass Communication at ASU through the Reynolds Institute and is a fellow and teaching consultant through the National Writing Project. When she's not managing communications for NeoLev Technologies, Janice is a full-time educator at Vista del Lago High School in Folsom, Calif., teaching English and Mass Communications. She can also be found enjoying great books, fine wine and excellent food while others are busy running and biking at their own peril. You can email her at info@neolevtech.com

Becca Cord – Digital Media
Becca Cord – Digital Media

Becca Cord has a BS degree in Marketing from the University of Louisiana at Lafayette. She is a web marketer, copywriter/editor, SEO expert and videographer having worked with innovative companies such as the popular Shakoolie and nationally recognized brands like Pop-a-Lock. Becca has been published in a handful of local Louisiana and national publications. She also produces her own YouTube series and works her day job at Comit Developers Web Designa and Digital Marketing firm. You can e-mail her at Cord.Rebecca@gmail.com.

What Will We Do With The Money?

Once we honor our commitment to send the donor's their Rewards, the goal is to present the innovation to toy companies and catalogs so we can manufacture these in large quantities. We need funds to devote to more research and development, producing more suitable prototypes, creating a strategic marketing strategy, seeking legal counsel, completing the US patent, pursuing foreign patents and extending public awareness. We will also need to build resources and marketing tools on our website so that we have a solid hub for feedback. Finally, we need a special place to house updates about ongoing research and development for an increased board size using a different technology. The Back to the Future miniature levitation products have the potential to be the coolest toy in a decade, but it won't be possible without YOUR help and support.

"I wanna Pit Bull" - Hover Board Production
"I wanna Pit Bull" - Hover Board Production

Manufacturing Process

 Pre-Rewards Manufacturing 

The R&D in proving the technology has been successful. By developing a variety of prototypes through these efforts, the manufacturing process and vendors have been determined with quotes calculated for Rewards manufacturing. During this fundraising campaign, sufficient materials have already been ordered for Reward levels to serve as final pathfinders to identify specific problems in dimensions, tolerances, supply chain, etc. For example, the magnets used for the levitation surfaces are unique arc magnets which are not readily available, so they have been precision drafted requiring long lead times from order to manufacture/shipment. Shipping containers for each Rewards Level has been evaluated along with method of delivery. All manufacturing for the pathfinder Pre-Rewards are assembled in our southern California facility.

 Rewards Manufacturing 

Immediately upon completion and funding of the campaign, vendors and suppliers (magnets, acrylic plates, hardware, decals, shipping materials) will be notified of the exact quantities needed and materials will be ordered. In parallel, levitation boards will be produced. We are approaching the Rewards manufacturing strategy based on potential levels of scale up to $100,000 in funding. All assembly can be done in California as described above in the Pre-Reward Manufacturing section. This scale potentially involves the assembly of up to several thousand Rewards, so additional hourly personnel will be hired to assemble, pack and ship the Rewards if we surpass the $100,000 mark.
 

 Post-Rewards Manufacturing 

After Rewards have been sent to the donors, efforts will focus on lessons learned in manufacturing and supply chain management depending on the scale of the production. The ultimate goal is to present the technology to be licensed and/or have the patent purchased by a large company for mass production. Therefore, more research and development of advanced prototypes are required. Depending on the scale of donations, these prototypes will be designed and tested in our warehouse if very large scale production is warranted. We fully expect there to be a large demand for these , so manufacturing likely will continue in the same manner as during the Rewards manufacturing process. 

Marty McFly Hover Board in Action
Marty McFly Hover Board in Action

Project Timeline

First, we will focus on producing the rewards to ship out to our faithful supporters…you, the donors! We are looking forward to this challenge as it involves a full manufacturing procedure of the hover boards by which we’ll discover ways to improve the board and optimize the process along the way. You are helping us to make elite technology and production quality. Our goal is to have most of the rewards in transit to their new owners within three (3) months of meeting our funding goal, which just happens to fall on October 2015. Specially-ordered magnets and board material need time to be manufactured from scratch. Meanwhile, marketing and legal strategies will be formulated and a further social media push will be done in attempts to get the attention of larger companies and catalogs. Completion and approval of the US patent will also be done.

Risks and challenges

Every project has its setbacks and we believe we’ve addressed the majority of technical issues by producing and testing a myriad of prototypes. This involved working closely with vendors and manufacturers in all aspects of design and procurement. Precision has been applied by incorporating Computer Aided Design while finite element analysis optimized the levitation height and stability of the NeoLev products. By drafting a patent we’ve performed extensive due diligence to remain confident about the commercial and legal viability.

A most critical issue is safety. Anytime high grade magnets are distributed to the public, their use must be scrutinized. Recently there have been mishaps with children swallowing several small magnets causing internal damage. We’ve designed this system with those dangers in mind by mechanically bolting the levitation surface magnets together and making their geometry such they cannot be ingested. In addition the Rewards and patent application offer various safety designs so the magnet surface is physically shielded from flat surfaces thus forcing the strongest parts of the magnetic field to be far from pacemakers, credit cards and metal objects. A prominent warning label is included with each levitation surface and on the box sleeves. The pyrolytic graphite material is carbon-based and similar to pencil lead. Each of these materials are commercially available and able to ship domestically and internationally from the US.

The agreement with Universal is for distribution of the Back to the Future products in the United States only. We are considering obtaining foreign licensing. In the meantime, we offer non-Back to the Future Rewards to highlight the cool levitation technology.

All of your support and funding will be crucial in finding solutions to these risks and challenges. Our dream is to boost NeoLev into full force, so we need time to focus all of our energy on development. As we all know, time is money. That's where you come in!




Back to the Future Films are trademarks and copyrights of Universal Studios and U-Drive Joint Venture. Licensed by Universal Studios LLC. All Rights Reserved.

NeoLev is a registered trademark with a patent pending by NeoLev Technologies LLC www.NeoLevTech.com

Learn about accountability on Kickstarter

Support this project

  1. Reward no longer available

    Pledge $25 or more About $25

    Early Bird Special. Great Scott!

    Marty McFly Back to the Future Hover Board with 3-1/2" Levitation Base. FREE SHIPPING.

    Less
    Estimated delivery
    Ships to Only United States
    Reward no longer available 39 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge $29 or more About $29

    Marty McFly Back to the Future Hover Board with 3-1/2" Levitation Base. Sweet deal. FREE SHIPPING.

    Less
    Estimated delivery
    Ships to Only United States
    50 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge $39 or more About $39

    Carbon Fiber Hover Board Technology Demonstrator with 7" glowing neon blue Levitation Base. A hit for our international backers.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    8 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge $49 or more About $49

    Marty McFly Back to the Future Hover Board with 7" Levitation Base. This one really rocks back and forth. FREE SHIPPING.

    Less
    Estimated delivery
    Ships to Only United States
    20 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge $79 or more About $79

    Carbon Fiber Hover Board Technology Demonstrator with 13" glowing neon blue Levitation Base. Major worldwide action. Newton's Cradle for the 21st Century?

    Less
    Estimated delivery
    Ships to Anywhere in the world
    4 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge $89 or more About $89

    Marty McFly Back to the Future Hover Board with 13" Levitation Base. Serious hang time here. FREE SHIPPING.

    Less
    Estimated delivery
    Ships to Only United States
    6 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Select this reward

    Pledge $129 or more About $129

    Film Maker Signature Edition - FIVE Back to the Future Hover Boards (Marty McFly, Pit Bull and 3 others seen in the movie) with 13" Levitation Base laser-engraved with the movie's director, producer and hover board designer. FREE SHIPPING.

    Less
    Estimated delivery
    Ships to Only United States
    31 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  8. Select this reward

    Pledge $169 or more About $169

    Film Maker Signature Edition with PERSONALIZED Signature from Back to the Future Trilogy Co- Creator, Screenwriter, Producer Bob Gale - FIVE Back to the Future Hover Boards (Marty McFly, Pit Bull and 3 others seen in the movie) with 13" Levitation Base laser-engraved with the movie's director, producer and hover board designer. Personalized signature from Bob Gale on Collectible Box Sleeve. FREE SHIPPING.

    Less
    Estimated delivery
    Ships to Only United States
    8 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (30 days)