The pokepuppers are made up of foamed milked inside of a cup that has the pattern of the pokemon they are made after.
Puppuccino will be [1.5in] pins would be [copper plated] with [two posts] on the back which will have [rubber clutches]. The derpy googly eyed pkmns will be [gold plated] to match with previous made derpy pins.
[Standard Pin Grade]
♦ Slight flaws. Not very noticeable at normal view.
♦ Some scuffs or scratches
♦ Small specks or dust.
[Seconds Pin Grade]
♦ Noticeable flaws
♦ Low/overfilled or bubbling in the enamel
♦ Deep scratches or dents
♦ Some oxidation
-- Puppuccino --
★ [Unlocked] Growlithe $240
★ [Unlocked] Furfrou $450
★ [Unlocked] Houndour $720
★ [Unlocked] Rockruff $960
★ [Unlocked] Poochyena $1200
-- Derpy googly eyed --
★ [Unlocked] $1440 Growlithe
★ [Unlocked] $1680 Arcanine + Growlithe
★ [Unlocked] $1920 Rockruff
★ [Unlocked] $2160 Lycanroc + Rockruff
★ [Unlocked] $2400 Houndour
★ [Unlocked] $2640 Houndoom + Houndour
-- Extra Extra :U --
★ [Unlocked] $2880 Free Wooloo for each backer! (Standards while supply last, rest will be seconds)
★ [Unlocked] $3120 Derp Arcanine
If you would like to add on extra pins to your pledge. It'll be $10 each unless you got the early bird slots :D
Eevee - Flareon - Jolteon - Vaporeon - Espeon - Umbreon - Glaceon - Leafeon - Sylveon
Pikachu - Zorua - Vulpix - Ninetales
These are [1.5in] pins would be [gold plated] with [two posts] on the back which will have [rubber clutches]
If you would like to add on these pins to your pledge it will be $12 each.
If you want only these pins you can get them on my [ETSY SHOP]. Umbreon, Leafeon, and Ninetales are sold out on the shop though.
65% - Pin Production: Cost to order the pins from manu which include individual pin cost, mold cost, and shipping to me.
25% - Shipping/Packaging: Cost for bubble poly mailer and shipping labels.
10% - Kickstarter Fee: KS fee that they take.
Kickstarter Campaign - 21days
Kickstarter Payment - 14days
Survey sent/Files sent in to Manu - July
Production Finished - September
Mailing Out - September/October
Risks and challenges
You're not charged for the pins until the end of a successful Kickstarter. You can pledge now and be charged later when it ends.
Since goals are lower than usual, quantity per pin is low and may have higher defect rate. All backers will be getting standard/A grade pin. They will have minor flaws; light scuffing/nicks on the metal plating or tiny dot/dimples on enamel or metal plating.
If the defect rate is really high, I may need to ask for remakes from the manufacturers and it will take longer to get the pins and ship them out.
Some designs may be edited a little bit when manu proofs the images.Learn about accountability on Kickstarter
- (21 days)