Share this project

Done

Share this project

Done
Ubertooth One is an open source 2.4 GHz wireless development platform that can be used for Bluetooth sniffing and more.
Ubertooth One is an open source 2.4 GHz wireless development platform that can be used for Bluetooth sniffing and more.
441 backers pledged $53,001 to help bring this project to life.

About this project

Ubertooth One: an open source Bluetooth test tool project video thumbnail
Replay with sound
Play with
sound

$53,001

441

Thanks for visiting Ubertooth One on Kickstarter! I'm Michael Ossmann, and I hope you'll help me launch the world's first affordable Bluetooth monitoring and development platform. This is a fully open source product (both hardware and software) that I've been working on for about two years. It is finally ready to release, but I need your help to produce a run of fully assembled and tested units, making the platform accessible to all.

Commercial Bluetooth monitoring equipment starts at about $10,000. Project Ubertooth seeks to produce an affordable platform that can be used for Bluetooth monitoring and for the development of new Bluetooth and wireless technologies.

Low-cost off-the-shelf Wi-Fi adapters have supported monitor mode for years, and the technique has found diverse uses in security research, troubleshooting, product development, intrusion detection, and more. Unfortunately, there has never been an equivalent tool for Bluetooth before Ubertooth One, a fully open source platform (both hardware and software).

You can find out more about Project Ubertooth on my blog and at the project web site.

Thank you for taking the time to check out Ubertooth One! It is people like you who will make this project a success by pledging your support or just spreading the word.

Thanks to Dan Gottesman for editing my Kickstarter video on very short notice. Thanks to the Baldwin Brothers for their song Right On.

FAQ

Have a question? If the info above doesn't help, you can ask the project creator directly.

Ask a question

Support this project

  1. Select this reward

    Pledge $15 or more About $15

    and receive an Ubertooth One printed circuit board that you can use to build your own Ubertooth One or keep as a souvenir. You will also receive a single-use laser-cut stencil to make the assembly process easier.

    Less
    12 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge $30 or more About $30

    and receive a printed circuit board and stencil for building your own Ubertooth One. In addition, you'll receive a fully assembled and tested pogoprog, a serial programming device that you can use to load firmware onto your Ubertooth One.

    Less
    50 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge $100 or more About $100

    and receive fully a assembled and tested Ubertooth One.

    Less
    234 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge $180 or more About $180

    and receive two assembled and tested Ubertooth Ones.

    Less
    68 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Reward no longer available

    Pledge $220 or more About $220

    and receive one assembled and tested Ubertooth One plus one special Kickstarter Edition Ubertooth One featuring the LPC1759 processor, an enclosure, and a special antenna.

    Less
    Reward no longer available 50 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Reward no longer available

    Pledge $221 or more About $221

    and receive one assembled and tested Ubertooth One plus one special Kickstarter Edition Ubertooth One featuring the LPC1759 processor, an enclosure, and a special antenna. This is the same as the $220 reward, but I was able to open up a few more slots.

    Less
    Reward no longer available 15 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (30 days)