RADIUS X and NYC Pop-up Store coming soon!
Please keep this space in mind as we at mod-3 are preparing to launch RADIUS X.
Still made in USA, still fully CNC machined, still made of 6061-T6,... Read more
Clever DIY wallet design from our friends at Chipwallet Company
A revolutionary wallet made by YOU. Chipwallet invites you to a process of making and transforming, a simple bonding perhaps with something you will carry every day. Made from... Read more
Shipping Update - 129 cases shipped, 210 next week
We shipped 129 cases last month, mostly are domestic backers. The rest will ship next week. International shipping is being handled by mailing service and those will go out next... Read more
RADIUS cases are done.
Done manufacturing, polished, anodizing and assembly that is. The cases are tested and we are shipping them. We took a few days to inspect and process each of the cases... Read more
Manufacturer #2 In the House - Two is Better than One
We did a final count and there are approximately 300 backers who have not received their rewards. Your reward will be ready in 2-3 weeks, I hope sooner. ... Read more
New Manufacturer In the House - Aluminum Blocks Mercilessly Carved
It took a while to untangle from our last manufacturer and we placed order with the new manufacturers last month and finally after the typical sample making, adjustment... Read more
Kickstarter Limited Edition - 100% Completion & Shipping
I am very glad to have this update to our backers of Limited Edition Kickstarter Green being 100% completed and shipping.
Green & Slate Limited Ed.
All of... Read more
Resuming Shipping - Ending Bad Relationship & Forging New Ones
Short version: We are shipping, we shipped 100 two days ago and will ship another 100 Monday, and continue with 100 units every other day.
Long version... Read more
Screw 3.0 - Hex broach, Harder Stainless Steel plus Shipping Update and Bright Colors
Yesterday we received the first 800 of the new screws (3.0). They function and perform GREAT. No more weak heads popping off, I tested them and they... Read more
A glimpse to making the RADIUS - a quick look at what goes behind each case
Update on screw-gate and then the brief "making-of":
1. We are proceeding with making all of our cases with HEX SS303 Stainless Steel screws. The screw manufacturer found... Read more
Critical Juncture - Decisions & Actions, Schedule
I will get straight into the things that caused our project so many delays.
One of the resolution to the screw-gate: a new screw (right side)
THE FACTS:... Read more
Progress on Production: It's a Process
I am very sorry at the late update. I wanted to wait until I have a significant progress and report on the solutions on some of the issues,... Read more
Important! - Assembly Video & Some Important Notes About Installation
Some of you have received the RADIUS and have reported some issues, thanks for the feedback and I will address them below.
First, please watch the assembly video... Read more
We Shipped! - The Beginning of the Beginning!!!
Hi! I have been camping out at the manufacturing facility past few days (quite literally). We shipped the first batch. Next 7 working days we will ship AT LEAST 50%... Read more
Quick Update 2 - Counting Down the HOURS to Shipping
Another quick update, we are 3 days away from shipping the first batch of few hundreds.
I would like to inform all of you of the tidbits and... Read more
Quick Update - Final Pieces Arriving
A quick update, we are getting everything together. Almost there. The last piece of the puzzle is the anodizing, it is more complicated and difficult than we thought.... Read more
Hiccup on the Road - Delivery Schedule Update
We were doing so well. I have been working with the manufacturer very closely these past few days trying to ensure I deliver to you what I promised.... Read more
Just Push Start - The Adventure of the RADIUS Case
Thank you for your patience and continuing support for the project. I am glad to have many photos to show this time and will have even more for... Read more
Shipping Date and General Updates on Delivery
It's been 6 weeks since the end of our campaign. We have been working everyday to do everything we can for the March delivery, projected ship date will... Read more
Final Prototype 2D Reviewed Approved, started production & packaging concept!
First, for those who missed the campaign and would like to pre-order the RADIUS please visit our partner site at BiteMyApple.co
Thank you for your patience and... Read more
Survey coming! Visit our site to get the RADIUS case if you missed the funding.
Our Kickstarter campaign has ended, but you
can still order the RADIUS on our website: www.mod-3.com
Click on the "Order" button and it will take you to the... Read more
45 days, Nearly 1,000 Backers and Countless Supports!!
Thank you.You made this project happen. A few months ago this project was just a sketch and a dream, and you believed in the dream and allow us... Read more
All Slate Color Option Available!!
Dear Passionate Backers,
We are happy to report that we will be able to offer the Slate corner modules! At the end of the funding (which is soon!!) we will... Read more
All Color Schemes w/ White iPhone!
Here they are, the white iPhone 5 visuals with RADIUS. The images should help those still undecided and need a little help. Again, actual colors in the production... Read more
As Requested - Black iPhone Color Schemes!
Many of you requested the color pics for black iPhone, so here they are! Note that the Slate corner modules as indicated by ( )* is pending... Read more
Early Bird Reward Extended!!! Counting Down to Final Days! It's a Nail-biter!!
After a team discussion we decided to extend the Early Bird reward. We have received a lot of inquiries about this and this will also help us reach... Read more
10 more days and 10 more Ks to go!
Hi backers and fellow design enthusiasts!
Here we are, nearing the last stretch of the campaign. You guys and gals are awesome, but we need your help and support to... Read more
Happy Holidays! Here's a little something for our backers!
Dear awesome backers,
We want to share the joy of the holidays and say thanks with a little something we created for our backers: A little paper snowman! You can... Read more
Monday review of personal use & other notable products
Hello our dear backers!
We have had the chance to take out one of the prototype for a few weeks of continuous usage now. I carry it everywhere I go.... Read more
Friday treat! Avatar for our Backers!
Hi backers, happy Friday! We made an avatar for you! Wear it, share it, everywhere you go and tell the world you backed us and share the project!
Right click... Read more
New reward and FAQ added!
We love collaborations and having more people help us improve and see our ideas from different perspectives. To us, that's what makes great design and products. So we added a... Read more
Quote from Gadgetmac.com
"...unique and lightweight aluminum exoskeleton design covers very little in order to prevent any potential signal loss caused by the metal material, whilst maintaining the original design of the iPhone... Read more