Keyless. Alarm secured. GPS tracking.
What is LOCK8?
LOCK8 is the first smart bike lock and we want LOCK8 to revolutionize the way people think about bicycle security.
LOCK8 does NOT require a subscription!
The basic functionalities of LOCK8 such as keyless locking, unlocking, activation of the smart sensors, the alarm system, smart cables or e-key sharing up to five people will always be for FREE!
Only if you use other services like renting out your bike, push notifications or GPS tracking we need to charge a small subscription fee, as this requires a GSM connection that we need to pay for. We expect the subscription for these extended services to be around $2 per month, but you can always choose not to go for a subscription.
Wired smart cables, different cable sizes, lock multiple bikes
LOCK8 cables will be wired and if cut, trigger the alarm.
We will produce multiple cable sizes, lengths and strengths. If you want to lock various bikes with one LOCK8 wired cable, this won`t be a problem.
Remember: You can also use LOCK8 without the wired cable. Just activate the alarm by walking away.
The clamp is fitted with a rubber padding, to protect the frame and adapt to different frame sizes.
Compatible with 95% of all bicycles
We partnered with alpha-board in order to perfect the electronics board design.
How it all began...
At University both our bikes got stolen multiples times. So over a coffee on a sunny day in England, we started talking about bike theft. Surprised that there wasn't a technologically advanced bike lock on the market, we decided to build one ourselves. We installed our own little workshop, decided not to tell anyone and started drawing, machining, soldering and testing. One year later we are extremely excited about the launch and would like to thank everyone who has supported us! Particularly our families and friends!
Since September '12 we have been refining LOCK8.
We then switched to a shark fin design, and decided LOCK8 should be mounted to the frame close to the back wheel. This solved many problems. Charging through induction was now possible (so we skipped the solar panels). Induction charging now works through reflectors (with built-in magnets) that we provide for you.
Electronics Demo on open LOCK8:
How you can get involved...
By pre-ordering LOCK8 you can help us go into production. We have selected key partners we want to produce with and are ready to start producing after the campaign ends. Our next steps are: create moulds for mass production, source components, print electronics (PCB), assemble, package and ship to you!
November (29th October): Kickstarter Launch
November: Agreements with manufacturing partners are finalized
December/January: Tools and components ordered
February: Manufacturing begins
March: Testing of first production batch
April: First batch is prepared for shipping
May: Shipping of first orders
July: All Kickstarter orders finalized
Risks and challenges Learn about accountability on Kickstarter
Building a hardware product like LOCK8 involves challenges due to its complexity. Aware of the risks we have gone through many versions of prototype production to ensure a great final product.
- Manufacturing: LOCK8 requires different manufacturing techniques. During various meetings we got in touch with reliable producers, who we hold a very friendly and professional relationship with. We have a fallback option for every partner to avoid time delays in case we identify a problem.
- Shipping: We realize that shipping is always a logistical challenge. Therefore, we are working hard to find the best companies to help us deliver in time. In addition, having our assembly hub in Mexico means that shipping to the rest of North America is not only simple but also reduces our costs and helps keep the price of LOCK8 down. Shipping to Europe is also relatively easy from Mexico's Gulf ports.
- Sourcing: Getting all the material and components together in one place is a daunting task. We have already started sourcing of components and are looking for alternative providers for the components where we are seeing time delays in order to anticipate potential problems once manufacturing begins.
The most likely challenge will arise from the continual improvement of our prototype to a finished product. Every avenue of bike security will need to be explored explicitly to ensure our final product is at least as secure and reliable as the customer expects it to be.
On a software side, the on-going ironing out of technical glitches does now, and will always remain at the forefront of our tech team's agenda before, during and after launch.
Yes! We designed LOCK8 with mountain bikes with disk brakes in mind. Have a look at the design, there is a groove on the back that makes sure that LOCK8 won't interfere with the disk. Over 95% of thousands of bikes we have tested are compatible; most of those that aren't don't have an actual chain stay.
If you have any doubts about the compatibility of your bike then please email us a close-up photo of the back wheel (on the opposite side of the chain) and we'll answer as soon as possible confirming compatibility.
Nope. LOCK8 is fully functional out of the box. It uses Bluetooth 4.0 (also known as Bluetooth Low Energy). You can lock, unlock, change settings and share your bike for free. The alarm will be triggered in case of tampering too. In case your bicycle is stolen we will activate the GPS for you and help you track it down and recover your ride.
If you wish to have an enhanced experience with your LOCK8 then you can add our Remote Services add-ons at a low monthly cost at around US $2 (no hidden costs: you can cancel anytime and there are no contracts). These plans will allow you to offer your bike for rent, track it's location and to receive notifications on your smartphone in case of tampering.
LOCK8's app will be supported by iOS and Android upon delivery and later on Windows. Keep checking our web-site, Twitter and Facebook for future developments and BETA releases.
No, it already contains an integrated SIM chip inside which can be activated with a variety of networks.
Attempting to steal the bike sets off the alarm, which gives you and the LOCK8 community time to stop the theft. Also the painfully loud alarm would alert everyone near the bike that it is being stolen, giving the thief less time.
To get the lock off your bike you would need a long time and to virtually destroy the bike. The polycarbonate casing will take some damage before being removed.
Your lock will notify on your phone that your battery is getting low on power. The lock holds a small charge so you can release your bike and either charge it while you ride, using induction or via a USB port.
No, LOCK8 is not compatible with NFC. Instead LOCK8 uses Bluetooth 4.0 (an energy saving variant of Bluetooth) to communicate with your smart phone device.
LOCK8 uses Bluetooth encryption to communicate with your smart phone device so you can rest assured that your devices are safe and secure.
If thieves were were professional enough to break this encryption they'd probably be hacking bank accounts instead.
If your phone gets stolen you can still unlock your bike. Either download LOCK8's app onto a friends phone or use the key fob provided with your lock to open it.