Funded! This project was successfully funded on April 21, 2012.

Update #3

Awesome New $3 Upgrade

Hi Backers,
We are soooo excited to see the support that everyone has shown so far! You guys rock!

THE BIG NEWS
Some of you have asked us, "What do I do with the cap?...Does it fit on the back so I don't lose it?" 

Well, now it can. We talked to our manufacture and developed a new back plug. It works great so we are offering an exclusive, never-before, threaded back plug that will hold your cap on the back of your PHX-Pen!

UPGRADE MY REWARDS!
If this new upgrade has your name written all over it, simply add $3 (per pen) to your reward and we will add the new screw-on back plug to your current rewards.  We will send out the survey to collect address and to confirm your upgrades after the project has ended to make sure everything is clear.

YES,You will still get to keep the original "flat" back plug when you upgrade so you will end up with two back plugs. The original plug and the new threaded plug.

Example:
$23 = 1 PHX-Pen + 1 New Upgrade Back Plug + 1 Hi-Tec-C Pen + Free World Wide Shipping! 

$46 = 2 PHX-Pens + 2 New Upgrade Back Plugs + 2 Hi-Tec-C Pens + Free World Wide Shipping!

How do I change my pledge amount?
Visit the project page and click “Manage Your Pledge.” Enter a new total amount (add $3 per pen) in the pledge amount box. The total dollar amount you enter will be the total amount collected if the project is successfully funded.That's it!

Be sure to check out the photos and demo video below.

Thanks again for making this project a success! We are stoked about making these awesome pens for each and everyone of you. Have a great day!

Here's the project link to share with your friends: http://kck.st/GOc54y

-Chadwick & Joe

  • Video-95773-h264_high
    Play
    00:00
    00:00

  • Image-105624-full
  • Image-105625-full
  • Image-105626-full
  • Image-105627-full
  • Image-105630-full

Comments

    1. Fb_profile_picture.small

      Creator Blake Thornton on April 19, 2012

      Fantastic pen cannot wait to get it!

    2. Missing_small

      Creator Louis Rodriguez on April 17, 2012

      Gentlemen, you guys rock! That was one of my concerns about this pen, losing the cap and now you have address it with style. I will be increasing my pledge by 3 dollars. Good job, looking forward to my new pen.

    3. Chadwick_joe_headshot.small

      Creator chadwick parker & joe huang on April 13, 2012

      Hi Jimmy,
      The $1 category is for people that want to help the product but will not get any rewards mailed to them.

      If you would like to receive the PHX-Pen + new upgraded back plug you will need to move your pledge over to the "$20 or More" category and pledge a total of $23.

      Thanks for your question.
      -Chadwick & Joe

    4. Missing_small

      Creator JimmyCSchnides on April 13, 2012

      My pldge is for $21 but I am in the $1 reward category. Will I still receive a PHX pen with new cap upgrade minus the hi-tec-c?

    5. Chadwick_joe_headshot.small

      Creator chadwick parker & joe huang on April 13, 2012

      Hi Star

      We have seen you have already increased your pledge for the additional $3, it's confirmed, thanks.

      -Joe & Chadwick

    6. Chadwick_joe_headshot.small

      Creator chadwick parker & joe huang on April 13, 2012

      Hi star,
      You can adjust your pledge upward and still keep your early backer spot as long as you don't click cancel your pledge. Thanks for your support.

    7. Fb_profile_picture.small

      Creator star on April 13, 2012

      I was among the early backers and I am hoping that by changing the amount, it won't kick me down to the end of the list... Can you confirm this?

    8. Chadwick_joe_headshot.small

      Creator chadwick parker & joe huang on April 12, 2012

      Hi Ryan,
      Thanks for backing! We are glad to have you join the project. Have a great day!
      -Chadwick & Joe

    9. Missing_small

      Creator Ryan Fesser on April 11, 2012

      I am both a pen nerd and a design geek, thank you for doing this. I already changed my backing amount.

    10. Missing_small

      Creator rmellin on April 8, 2012

      Thanks for the answer! I did not watch th emovie before and yes i c: tight and loose threads .... clever :-)

    11. Chadwick_joe_headshot.small

      Creator chadwick parker & joe huang on April 8, 2012

      Hi rmellin,
      We have tried making the cap with opposite directions before (right hand & left hand threads) and it turns out when you tighten the cap, the plug will become loose. The way it is now is the best way for us to do it. We had been testing the balance between how "tight" and "lose" both sides/threads need to be and now it works pretty smoothly. Check out the video to see in in action. Thanks for the question and for your strong support.
      -Chadwick & Joe

    12. Missing_small

      Creator rmellin on April 8, 2012

      Just one important question though: are the two thread directions opposite to each other? i.e. If both were the same, then its possible to screw the cap so tight onto the end that upon unscrewing, not the cap itself but the cap with the plug inside comes out?!

    13. Fb_profile_picture.small

      Creator Conner T on April 8, 2012

      Thanks for answering my question! Can't wait to get my pen!

    14. Fb_profile_picture.small

      Creator Antony Shum on April 8, 2012

      Nice try! Can't wait for the great pen!

    15. Ksm3.small

      Creator Steve Newton on April 8, 2012

      Thanks for getting back to me guys, pledge adjusted upwards.

    16. Gunner.small

      Creator Matthew Morse on April 8, 2012

      Great idea guys, I'll bump my pledge up a few bucks.

      @Mikeybear: While I agree that you are entitled to your opinion, I find your need to call names rather childish and if I were Chadwick and Joe, I'd gladly refund your money and ask that you purchase your pen elsewhere. Also, you should maybe worry less about what should or should not have been an "obvious feature" on this pen and more about your poor use of punctuation and spelling.

      I'm just glad this product is on time, unlike another pen I backed over 6 months ago that I still have yet to receive. Good for you guys! Can't wait to get this thing. I love that it will work with the Signo or the Hi-Tec. Both are favorite pens of mine.

      Cheers!

    17. Chadwick_joe_headshot.small

      Creator chadwick parker & joe huang on April 8, 2012

      Steve Newton-Yes, you do get both plugs by upgrading the pledge.
      We feel like it's a balance between "clean design" and "functional feature", but the solution is only one way around. That's the least we can do to offer it as an option to our backers, we are glad that lots of backers think it's worthy to have one more option to play with. We are always grateful for all of your support, hope everybody has a good day:-)

    18. Chadwick_joe_headshot.small

      Creator chadwick parker & joe huang on April 8, 2012

      Hi Steve Newton,
      Yes, if you choose to upgrade you will get both the original and new back plug. Thanks for your question.
      -Chadwick & Joe

    19. Ksm3.small

      Creator Steve Newton on April 8, 2012

      If you upgrade do you get both plugs? So you could see which one suits you best?

    20. Missing_small

      Creator Joyce on April 8, 2012

      I prefer having both options too as well. Just upgraded my pledge from 2 pens to 3 pens with the new feature. I can't wait for my pens to arrive! :-)
      @Mikeybear - you are perfectly entitled to your opinion that you'd prefer just the new plug and you are free to raise that as a comment.

    21. Skull.small

      Creator Sherif on April 8, 2012

      I actually prefer having both plugs. Thanks for the upgrade guys.
      Mikeybear: If you don't like it, don't opt in for it. No one's forcing your hand.

    22. Missing_small

      Creator Mikeybear on April 8, 2012

      You are only 20,000 over your target it must be tough to scrape those pennies together eh !

    23. Missing_small

      Creator Mikeybear on April 8, 2012

      why not just change the end plug and then we decide whether to put the cap on or not
      Thought it must be April 1st again - you really want your backers to pay more for a minor modification that should have ben an obvious feature before !!!!!
      Cheapskates !!

    24. Cris.small

      Creator cris on April 8, 2012

      Great idea, just changed from 20 to 46$ :-D

    25. Chadwick_joe_headshot.small

      Creator chadwick parker & joe huang on April 8, 2012

      Hi Conrthomas

      We did try make opposite threads on the PHX-1 design tool set for the knife holder part, it turns out when you try to tight the cap the tip will get lose, it's been tested that doesn't work very well. So, we had been testing the balance between how "tight" and "lose" for the both sides threads on the plug for a while, now it works pretty smoothly, like it's in the demo video it won't unscrew the plug out easily.

      You can feel the cap sitting on the back of the pen slightly, but since the pen cap is short and hollow, it doesn't "trouble" your writing. I've been using it for couple of days and I don't notice the difference if I don't mean to compare with the cap on & off.

      Thanks for your input in to this project, your questions are great points, hope the information could help, have a nice day.

    26. Fb_profile_picture.small

      Creator Conner T on April 8, 2012

      Also, does the extra weight on the end making writing any different? How noticeable is the weight change?

    27. Fb_profile_picture.small

      Creator Conner T on April 8, 2012

      It it is possible, it would be cool to see the back plug threaded the opposite of the cap so that tightening the cap on the plug would unscrew the plug, and undoing it would do the opposite, so that you never have the issue of it getting stuck or coming off at the same time. Just a suggestion! p.s. just upped my pledge :D

    28. Chadwick_joe_headshot.small

      Creator chadwick parker & joe huang on April 8, 2012

      sorry typo* The cap does not come off with the new back plug.

    29. Chadwick_joe_headshot.small

      Creator chadwick parker & joe huang on April 8, 2012

      Hi Blue,
      The function works really well on this upgrade back plug. The cap does not come off with the cap. Check out the video to see it in action. Now, If you apply a lot pressure you might have the issue you asked about happen, but using a normal amount of pressure the new plug stays in and works great. Thanks for asking.
      -Chadwick & Joe

    30. Img_1363.small

      Creator Shawn Tay on April 8, 2012

      Nice notice blue. I agree with u.

      Also I don't see the manufacturing cost extra for the screw head.. It's just the same pattern of the screw..

    31. Missing_small

      Creator Blue on April 8, 2012

      Looks awesome! Quick question, in your testing of the new back plug, did you ever run into situations where unscrewing the cap from the back also unscrewed the plug?

2,136
Backers
$64,356
pledged of $3,500 goal
0
seconds to go
  • Pledge $1 or more
    You selected

    8 backers

    You're awesome. Thank you for supporting our project! Every little bit helps.

    Estimated delivery:
  • Pledge $20 or more
    You selected

    1563 backers

    1 PHX-Pen + 1 Hi-Tec-C Pen + Free World Wide Shipping!

    Estimated delivery:
  • Pledge $40 or more
    You selected

    447 backers

    2 PHX-Pen + 2 Hi-Tec-C Pen + Free World Wide Shipping!

    Estimated delivery:
  • Pledge $60 or more
    You selected

    70 backers

    3 PHX-Pen + 3 Hi-Tec-C Pen + Free World Wide Shipping!

    Estimated delivery:
  • Pledge $80 or more
    You selected

    17 backers

    4 PHX-Pen + 4 Hi-Tec-C Pen + Free World Wide Shipping!

    Estimated delivery:
  • Pledge $100 or more
    You selected

    23 backers

    5 PHX-Pen + 5 Hi-Tec-C Pen + Free World Wide Shipping!

    Estimated delivery:
  • Pledge $200 or more
    You selected

    2 backers

    10 PHX-Pens + 10 Hi-Tec-C Pens + Free World Wide Shipping!

    Estimated delivery:
Funding period

- (30 days)