Share this project

Done

Share this project

Done
3D Printable Models of Undead Fantasy Figures That Need Zero Slicer Supports
403 backers pledged $24,257 to help bring this project to life.

About

$24,257

403

Running Model Count: 66

The overall value for your backing dollar will steadily increase throughout the campaign. Each unlock and surprise model release ups the model count. Right now, for only $60 at Tier 3 you get 65 unique figures, a huge extremely detailed multi-model stagecoach of the dead, a FREE 41 piece dungeon set, a FREE entrance to that dungeon set, and a FREE 12 piece dungeon expansion pack.  All highly detailed models that require zero slicer supports. That ratio will continue to change in your favor if you tell your friends and help us reach the next stretch goal!

Fear not Ranger, Barbarian, Magician, Thief, Cavalier, and Acrobat! For even in death, you shall live forever...
Fear not Ranger, Barbarian, Magician, Thief, Cavalier, and Acrobat! For even in death, you shall live forever...
Stagecoach of The Dead
Stagecoach of The Dead

All Tier 3 backers now get a free Reaper of Judgement, an undead skeleton warrior captain,  a demilich, a Death Tyrant, The Blood Count, a battle damaged skeleton, a bone spider construct, AND a huge extremely detailed multi-model stagecoach of the dead!

Miniatures printed on a $200 Creality 'Ender 3'
Miniatures printed on a $200 Creality 'Ender 3'

  DungeonWorks has been working on a secret project for the last 2 years and it's finally come to fruition thanks to the success of of KS1 and KS2.  We are proud to now offer a large selection of highly detailed undead fantasy themed 28mm figures that are able to be printed on both FDM and DLP machines that require zero slicer supports.  DungeonWorks models require no post processing.  Just slice, print, and play!

 Don't believe these models were printed on an FDM machine?  Try it yourself on your FDM or SLA/DLP printer with these free sample figures:

 2 free undead sample figures 

these are rendered figures to show the high detail of the models that you can expect
these are rendered figures to show the high detail of the models that you can expect
  •  Tier 1 - $20 (24 figures)
  •  Tier 2 - $40 (12 figures + Tier 1 )
  •  Tier 3 - $60 (27 figures + 1 Huge Model Kit + Tier 1 & 2 + Classic Dungeon - Starter Set + Classic Dungeon - Half Height Walls expansion set)

Tier 1 contains 10 medium based models and 1 large based model
Tier 1 contains 10 medium based models and 1 large based model

 Tier 1 contains the following:

  • Skeleton Warriors (4x medium)
  • Zombie Set 1 (3x medium)
  • Lost Souls (3x medium)
  • Bone Golem (1x large)
  • Marroweavers UNLOCKED (3x tiny)
  • Skeleton Warrior UNLOCKED (1x medium)
  • Ghost UNLOCKED (1x medium)
  • Skeleton Warrior UNLOCKED (1x medium)
  • Witch Lord UNLOCKED (1x medium)
  • Skeleton Mage UNLOCKED (1x medium)
  • Zombie UNLOCKED (1x medium)
  • Gelatinous Cube UNLOCKED (1x large)
  • Flaming Skeleton UNLOCKED (1x medium)
  • Mummy Lord UNLOCKED (1x medium)
  • Necrotic Slime UNLOCKED (1x medium)
  • Giant Skeleton UNLOCKED (1x huge)

_______________________________

Tier 2 contains all of Tier 1's models and an additional 1 tiny based model, 7 medium based models, and 4 large based models
Tier 2 contains all of Tier 1's models and an additional 1 tiny based model, 7 medium based models, and 4 large based models

 Tier 2 contains everything from Tier 1 with the addition of:

  • Skeleton Archers (3x medium)
  • Zombie Set 2 (3x medium)
  • Soul Clusters (1x tiny / 1x medium / 1x large)
  • Brain Parasites (3x large)

 _______________________________



Tier 3 includes everything from Tier 1 and Tier 2 and adds the following:

  • Bone Gargoyles (3x medium)
  • Death Knights (3x medium)
  • Bone Hill Giant (1x huge)
  • Rising Skeletons (7x medium)
  • Reaper of Judgement (1x medium)
  • Undead Skeleton Warrior Captain (1x medium)
  • Demilich  (1x medium)
  • Death Tyrant (1x large)
  • The Blood Count (1x medium)
  • Battle Damaged Skeleton (1x medium)
  • Bone Spider Construct (1x large)
  • Stagecoach of The Dead (1x huge based model kit)
  • Undead Hero Ranger (1x medium)
  • Undead Hero Barbarian (1x medium)
  • Undead Hero Magician (1x medium)
  • Undead Hero Thief (1x medium)
  • Undead Hero Cavelier (1x medium)
  • Undead Hero Acrobat (1x medium)
  • Classic Dungeon - Starter Set (a $15 value!)
  • Classic Dungeon - Entrance (a $5 value!)
  • Classic Dungeon - Half Height Walls expansion pack (a $5 value!)

This is by far the best deal, giving you a total of 65 unique figures, 1 huge stagecoach model kit, a 41 piece dungeon set, a 12 piece expansion set, and an accompanying dungeon entrance. These are all highly detailed models that require ZERO slicer supports and no post processing.  Just slice, print, and play!

As the kickstarter progresses, more surprise freebies will be added to Tier 3!
As the kickstarter progresses, more surprise freebies will be added to Tier 3!
Stagecoach of The Dead
Stagecoach of The Dead

 Get the all new Classic Dungeon: Crypts Expansion 1 for only $15 during KS3

You get 48 new models in this swanky sepulcher set expansion.  There's a double door gateway that signifies the entrance into the crypt for your adventurers.  Deathly detailed walls and floors decorated with skulls and bones reinforce the crypt theme.  You even get a sarcophagus with modular inserts to add variety to your grave robbing.

 Get the all new Classic Dungeon: Crypts Expansion 2 for only $10 during KS3

You get 22 new models in this incredibly ornate expansion.  There's pillars, stacked catacomb tombs, statues, alternative floors and walls, a fantastically evil throne, and a sarcophagus with 16 decorative modular faceplates.

For a limited time during KS3 we've put together some discounted bundles of the classics that would go best with the undead theme.  Just add the cost of the bundle you want to your pledge level amount.

DungeonWorks uses the InfinityLock system for superior customization, connection, and efficiency.  DragonLock and OpenLock are compatible with the InfinityLock system via free adapter clips.
DungeonWorks uses the InfinityLock system for superior customization, connection, and efficiency. DragonLock and OpenLock are compatible with the InfinityLock system via free adapter clips.

UNLOCKED:

As each stretch goal is unlocked, we will add a new and completely free reward to your pledge of Tier 1 or greater.

Marroweavers - a necrotic construct of bone and dark magic.  These creatures on a tiny base are great for swarming and quickly surrounding adventurers.  One isn't a challenge, but a dozen will take down even the most hardened of heroes.

Skeleton Warrior - an additional skeleton warrior with an axe and shield

Ghost - a ghost springing out from his gravestone 

Skeleton Warrior - an additional skeleton warrior with a spear and shield 

Witch Lord - A retro remake of a classic villain

Skeleton Mage - Casting spells and raising the 7 hells even in undeath!

Zombie - This zombie has a snack attack

Gelatinous Cube - Watch it wiggle, watch it jiggle, as it spells your D-O-O-O-M!

Flaming Skeleton - A soul of the damned condemned to endure burning torture for eternity 

Mummy Lord - Not just any old mummy...

Necrotic Slime - Ooey, gooey, and chock full of vitamin Evil

Giant Skeleton - He's HUGE and he's got a bone to pick with you =_=

Sample Prints

printed and painted by Danny from "3D Printed Tabletop"
printed and painted by Danny from "3D Printed Tabletop"
Printed and painted by Kenny Kroeger
Printed and painted by Kenny Kroeger
Marroweavers - Printed and painted by Kenny Kroeger
Marroweavers - Printed and painted by Kenny Kroeger
Soul Cluster (medium) - Printed and painted by Kenny Kroeger
Soul Cluster (medium) - Printed and painted by Kenny Kroeger
Witch Lord - Printed and painted by Kenny Kroeger
Witch Lord - Printed and painted by Kenny Kroeger
Printed and painted by Kenny Kroeger
Printed and painted by Kenny Kroeger
Printed and painted by Kenny Kroeger
Printed and painted by Kenny Kroeger
Miniature printed on a $200 Creality 'Ender 3'
Miniature printed on a $200 Creality 'Ender 3'
Miniatures printed on a $200 Creality 'Ender 3'
Miniatures printed on a $200 Creality 'Ender 3'
Miniatures printed on a $200 Creality 'Ender 3'
Miniatures printed on a $200 Creality 'Ender 3'
Miniatures printed on a $200 Creality 'Ender 3'
Miniatures printed on a $200 Creality 'Ender 3'
Miniatures printed on a $200 Creality 'Ender 3'
Miniatures printed on a $200 Creality 'Ender 3'

 Once the KS closes and Kickstarter provides us with the list of backers and their pledges, we will email everyone a code to redeem their pledges on GameDecor.com and you will be able to download your rewards from there.  The money raised from this KS will be used to further build our business and bring you bigger and better models in the future and continue  DungeonWorks innovations.

Game Decor Newsletter


Do you want to know more about DungeonWorks and Game Decor?  Do you have a 3D printer or plan on getting one soon?  Do you like free stuff?

Subscribe to our newsletter and get updates, special deals, contests with prizes, and free EXCLUSIVE models every month!


CLICK HERE to sign up

Click to view the current newsletter and get the free Ancient Arch!
Click to view the current newsletter and get the free Ancient Arch!

THE COMMUNITY:

DungeonWorks Architects

Come join us and other users on our Facebook group for tips, tricks, pictures, news, and vote on the direction of future DungeonWorks sets.

https://www.facebook.com/groups/DungeonWorksArch/

Risks and challenges

There is very little (if any at all) risk of this project not completing and people receiving their items as all of the items shown in render form are already finished. The only time consuming process is the conversion and testing of digital models to something that works physically. Due to the success of the previous DungeonWorks Kickstarters, we've been able to convert and test the majority of the models for this project and greatly reduce the turnaround time. But then again, things beyond our control do happen, such as fires, meteors, and acts of Godzilla. Either way, all of those things would only delay digital delivery, not stop it.

This is Game Decor's 4th Kickstarter and the 3rd for DungeonWorks.
Due to the digital nature of this project and our online residence in one of the major internet server farms, digital distribution reliability is guaranteed and physical shipping delays will not be an issue.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge US$ 1 or more About US$ 1.00

    Foot In The Door

    Show your support and be included in the pledge management.

    Less
    Estimated delivery
    20 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge US$ 20 or more About US$ 20

    Tier 1

    You get 11 unique 3D printable 28mm scale figures. There are 10 on medium sized bases and 1 giant size based figure. All DungeonWorks models require ZERO slicer supports.

    Includes:
    • Skeleton Warriors (4x medium)
    • Zombie Set 1 (3x medium)
    • Lost Souls (3x medium)
    • Bone Golem (1x large)
    Less
    Estimated delivery
    14 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge US$ 40 or more About US$ 40

    Tier 2

    You get everything from Tier 1, plus an additional 13 unique 3D printable 28mm scale figures. Tier 2 adds 1 tiny, 8 medium, and 4 large scale figures. All DungeonWorks models require ZERO slicer supports.

    Includes:
    • Skeleton Warriors (4x medium)
    • Zombie Set 1 (3x medium)
    • Lost Souls (3x medium)
    • Bone Golem (1x large)
    • Skeleton Archers (3x medium)
    • Zombie Set 2 (3x medium)
    • Soul Clusters (1x tiny / 1x medium / 1x large)
    • Brain Parasites (3x large)
    Less
    Estimated delivery
    2 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge US$ 60 or more About US$ 60

    Tier 3

    You get everything from Tier 1 and Tier 2, plus an additional 7 unique 3D printable 28mm scale figures. Tier 3 adds 6 medium, and 1 huge scale figures. All DungeonWorks models require ZERO slicer supports.

    Includes:
    • Skeleton Warriors (4x medium)
    • Zombie Set 1 (3x medium)
    • Lost Souls (3x medium)
    • Bone Golem (1x large)
    • Skeleton Archers (3x medium)
    • Zombie Set 2 (3x medium)
    • Soul Clusters (1x tiny / 1x medium / 1x large)
    • Brain Parasites (3x large)
    • Bone Gargoyles (3x medium)
    • Death Knights (3x medium)
    • Bone Hill Giant (1x huge)
    Less
    Estimated delivery
    364 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (30 days)