CA$ 1,848
pledged of CA$ 5,000pledged of CA$ 5,000 goal
24
backers
Funding Canceled
Funding for this project was canceled by the project creator on Mar 8 2019
CA$ 1,848
pledged of CA$ 5,000pledged of CA$ 5,000 goal
24
backers
Funding Canceled
Funding for this project was canceled by the project creator on Mar 8 2019

About

 PRE ORDER NOW AT IWILLNEVERGROWUP.COM

A Pre Order Page has been opened at www.iwillnevergrowup.com for both 25mm and 35mm metal flight stands.

Thank you for your early support and we hope to see you there!

 Take your fighters and bombers high above the battlefield! 

Metal Flight Stands In Use in Axis and Allies 1940 Europe - Take your air power to the skies!
Metal Flight Stands In Use in Axis and Allies 1940 Europe - Take your air power to the skies!

Are you tired of those little plastic fighters and bombers sitting on your game board taking up space? Do you want to add a dynamic factor to your game board?

Free up space on the board and have all of your air-power at your finger tips and in the skies, rather than piled up on the board with your ground units with I Will Never Grow Up Games' Metal Flight Stands!

These flight stands are crafted from solid polished stainless steel. Extremely high quality, they will not break or bend easily!  

 The base size matches the standard Axis and Allies Infantry unit base at 12.5 mm, meaning it will sit perfectly on those ubiquitous plastic multiplier chips. The base is 4 mm thick for extra weight and balance to help keep your units standing upright!

Metal Flight Stands come in two heights; 25 mm and 35 mm high, from tip to base so your planes will fly above standard infantry units on your game board. 

Designed to be suitable for use with a variety of historical based board games such as (but not limited to) Axis and Allies, Fortress America, Global War 1940, The War in Vietnam, as well as a variety of sci-fi board games such as Rebellion, and more! **

BENEFITS

  •  Solid Metal construction - won't bend or break like plastic!
  •  Heavy Base - helps prevent your pieces from falling over!
  •  Space Saving - free up valuable board space. ground units can sit partially below your air units!
  •  Slim Profile - the slim profile of the stands means you'll barely notice them on the board!
  •  Varying Heights - 2 different heights to help differentiate between units or create additional visual appeal to your game!

Bring your game to a whole new level with these Metal Flight Stands from I Will Never Grow Up Games!

SHIPPING

Shipping is not included in your pledge. All shipping will be charged in the PledgeManager after the close of the Kickstarter campaign.

Below is our reasonable estimate for shipping to various locations of the world. We will strive to ensure that actual shipping rates charged are equal to or less than these posted rates wherever possible.

 Orders of 15 sets (or more) of Flight Stands will incur an additional CA$5 on top of these rates. 

 Please note that if you pledge from any country we can not ship to your pledge will be canceled and refunded.

PREPARATION AND USE OF FLIGHT STANDS

Easily attach and detach your planes from the flight stand by using a single rare earth magnet (included) glued into the belly of your plane! No need to deal with magnet polarity because the magnets will grab the metal of the flight stand on their own!

   Just drill a small hole in the bottom of your plastic plane piece and glue the magnet in place. Once it's dried you can quickly attach and detach your plane from the flight stand with ease, yet with a strong hold due to the properties of neodymium rare earth magnets.

WHAT DO PEOPLE HAVE TO SAY ABOUT THIS PRODUCT?

As we have been selling 25mm height Flight Stands for the past year our customers have had some great things to say!

Harvard3X1

"Love the stands; game came to life, especially after I begin painting project in Dec 2018. Its a lot of work drilling but so so satisfying."

Toby Wiest

" If you want a good customization that makes life easy for anything involving planes, buy these, its worth the investment!"

Sean King

"These wonderful stands are made of a type of steel that allows magnets to attach to them directly. So you can do the drilling into your piece and attach a magnet to your piece (Axis & Allies or HBG piece or any other) and then it quickly attaches to your new shiny flight stand. When it is time to clean up you can just pop it off the stand and store how you like."

ABOUT I WILL NEVER GROW UP GAMES

The Company

We at I Will Never Grow Up Games LOVE board games! We love the way they bring people together in the spirit of fun and competition. We love that they are both tangible and creative. We love that they provide those small victories that can be so immensely gratifying.

We have spent years publishing news, reviews and advice about a variety of board games and everything surrounding them. We are a small but passionate company devoted to gaming and committed to the highest quality standards in everything we do, through creation, community and contribution!

Creative Director and CEO - James J Campbell

James is an indie game designer and the creator of a number of games and gaming accessories, both published and in development. James is the co-founder and creative director of I Will Never Grow Up Games.

DISCLAIMERS

** I Will Never Grow Up Games has no affiliation with any board games mentioned or their respective publishing companies.  Metal Flight Stands are a 3rd party accessory intended for use with various other companies board game products. Axis and Allies, Fortress America, Global War 1940, The War in Vietnam and Rebellion are either ®, TM and/or © Copyright their respective owners, variably registered in countries around the world. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.  

Risks and challenges

We've done this before! We've made the 25 mm height stands and sold them by the fistful. Now we're adding the 35 mm height to the mix so there's really no challenge here.

The production quote is in hand and ready to be initiated. We are working with an experienced manufacturing partner that we have nearly a decades long relationship with. We are familiar with their production requirements, timelines, payment schedules, communication methods and Chinese freight arrangements and costs for when it comes time for shipping. Our manufacturer is knowledgeable and more than capable of producing these pieces in short order and getting them to us fast so that we can get them to you and your table.

We have fulfilled multiple hundreds of orders over the past several years and have a completed Kickstarter campaign behind us already.

When this accessory is funded it WILL be produced and delivered in a timely manner.

You are in good hands! Thank you for putting your faith in us!

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge CA$ 12 or more About US$ 9

    Take Flight - 10 x 25 mm Flight Stands

    One Set of 10 Metal Flight Stands (25 mm height).

    Add $12 to your pledge for each additional set of 10 Metal Flight Stands (25 mm height).

    Shipping will be charged in PledgeManager after the campaign ends.
    See the shipping chart for estimated rates.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    1 backer
    CA$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge CA$ 13 or more About US$ 10

    Mixed Height Flight Stands

    One Set of 10 Metal Flight Stands containing a mix of 5 at 25 mm high and 5 at 35 mm high.

    Add $13 to your pledge for each additional mixed set of Metal Flight Stands.

    Shipping will be charged in PledgeManager after the campaign ends.
    See the shipping chart for estimated rates.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    2 backers
    CA$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge CA$ 14 or more About US$ 11

    Fly Higher - 10 x 35 mm Flight Stands

    One Set of 10 Metal Flight Stands (35 mm height).

    Add $14 to your pledge for each additional set of Metal Flight Stands (35 mm height)

    Shipping will be charged in PledgeManager after the campaign ends.
    See the shipping chart for estimated rates.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    3 backers
    CA$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge CA$ 60 or more About US$ 45

    Blitzkrieg! - 50 x Mixed Height Stands

    FIVE Sets of 10 Metal Flight Stands containing a mix of 25 at 25 mm high and 25 at 35 mm high for a total of 100 Flight Stands!

    Shipping will be charged in PledgeManager after the campaign ends.
    See the shipping chart for estimated ratesl.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 7 backers
    CA$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge CA$ 110 or more About US$ 83

    Invasion! - 100 x Mixed Height Stands

    Go Big or Go Home!

    TEN Sets of 10 Metal Flight Stands containing a mix of 50 at 25 mm high and 50 at 35 mm high for a total of 100 Flight Stands!

    Shipping will be charged in PledgeManager after the campaign ends.
    See the shipping chart for estimated rates and add CA$5 for this reward level.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited 8 backers
    CA$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (17 days)