Use this space to cheer the creator along, and talk to your fellow backers.
Have a question?
shot you an email, just a little issue
I sent you an email to email@example.com on 23rd October and still have no response. I am becoming very frustrated...
Hi Nathan! Thank you for your answer. I already sent an email on th 11th September. I will send another one, then.
The SlatePro's all shipped out a few months ago. If you have not received yours, please email firstname.lastname@example.org with your order name and address. We will figure out what happened to your shipments. Thanks for backing!
Hello again. I too have paid for the table in March and still have not received it nor any response to my comment from the September 22th. The wait and lack of feedback is getting really frustrating.
Hello again. I too have paid for the table in March and still have not received it nor any response to my comment from the September 22th. I am seriously considering reporting this project and wanting my money back.
Hi Nathan - We backed and paid for our table in March and have still not received it (second production run, July). Can you tell me the status of the shipment - we are anxious to receive it
Hi Nathan, exactly the same here. I am third in line, I wrote you an e-mail asking for some tracking details of the order as my shipping adress is in Europe, so I want to know about any possible difficulties with the order. Any thoughts? Thanks.
Hi Nathian I'm in the same boat as john I'm in the "third in line your get your slate pro in June and have not received the order yet either. Any thoughts where on where my order is?
Sent you a message John Jacoby.
I'm in the "You are Third in Line: Pledge $448 and Receive Your SlatePro in June" group and haven't received mine yet. Any thoughts on where my order might be?
We have had a few complaints about the screws and are doing our best to resolve this quickly. For those of you that have received your SlatePro, we recommend using a drill with a phillips head. This will help them go in much easier. If anyone needs a new set of screws sent to them, please email us at email@example.com. Thanks for your patience!
OMG I couldn't assemble at all w/ that bad screws. :( :(
I couldn't assemble two legs..... what should I do?
I wonder you, Nathan, try assembling w/ this package. The included tools didn't give help at all........ I want to get my full refund. I cannot use this desk at all. :(
I received my desk today ! :) (july production run)
Am I the only to have problem with the screws? After the thread they are thicker and it's impossible to completely screw them… :S
And why are the feet sanded at the bottom ? They are all black, but at the bottom they are grey… Thanks !
Received my replacement desk, and it's great. Thank you for the quick turnaround.
Have all the july delivery desks been shipped out?
Thanks for your comment Ben. I responded to everyones messages. If you have any great feedback, feel free to give us a shout out. For any questions or issues at all, please email firstname.lastname@example.org for quick / immediate assistance. Thanks again everyone!
got my desk last week and I love it! great job fellas! great design
@Nathan please get back to me too about the condition of my desk. Thank you!
@Nathan, I sent a message about the condition of the desk when it arrived. If you could respond that would be great. Thanks.
Not that I'm aware of, James. I'm a "second in line" backer but haven't heard/received anything.
@Nathan, any update since 05/21? Thanks man!
I'm pledged for the second production run but I'm curious how the project is coming along... any of the first run people have their desks yet?
Hi Nathan, would also appreciate an update please. Will we make May shipping? Thank you.
Any status updates on the production, ship dates, etc.? Would love to know if this in on track.
@Nathan How's the May deliverable coming? Haven't heard much since the funding ended.
@Nathan - along the same lines as J.Park - is there way to upgrade the high standing slate pro? I too forgot to add $48 :(
@Nathan, is there way to upgrade the high standing slate pro? I forgot to add $48 :(
Great job Nathan! Very excited to get my SlatePro!
I've been watching the "First Come, First Serve" tier like a hawk! Thank-you to whoever opted out of that tier, I was happy to take it off your hands :)
@Nathan - I sent you a message asking about the dual monitor size limit your described, can you please answer before funding ends? Thanks
I don't use a mouse, and don't have a need for the mouse pad. Will it be possible to not have it added to the desk? I think it will be a lint magnet for something that is useless for me. Thanks.
Richard - We are so close to the 100k mark and I want the high desk / standing SlatePro model myself. With that said, we put the PO's through for the additional (thicker steel) material. The high top legs are now in the works regardless of us hitting the 100k mark. I will be posting an update in the next hour to let everyone know the details. Thanks again!
Mina - You can fit dual monitors on the desk but there is a limit to the monitor size. Feel free to send me a message for any more information. Thanks!
We are very close to the 100k goal. What options will we have to buy the taller version if we do not meet the stretch target? Thanks.
I have a dual monitor setup, is this desk wide enough to accommodate that?
As soon as the project is funded, you will be sent a survey to select your SlatePro model. It depends on the computer/laptop but above the docks is a nice spot. I hope you enjoy, thanks!
Just backed it, my virgin support on KS! I wanna know when can I decide on the optional parts (like w or w/o cooling holes, etc.) for my desk? By the way, where do you suggest I can place my lamp? Thanks.
Nathan I sent you a message a few days back...take a look and get with me
Chris, we don't offer different colors of stains at this point. It's just not something we have been able to streamline. We'll keep the suggestion in mind. Thanks :)
Thanks so much for the kind words Craig! We weren't expecting that at all. It's great to see someone so experienced with crowdfunding be so excited about our work. You're the man!
Hi Nathan, Can we get different stains for the wood?
Just thought I'd mention this in case anyone might be "on the fence" about backing Nathan and this project....
I just received a Slate Mobile Air Desk and an iPad Dock yesterday that I had ordered through Nathan's iSkelter.com site. I am absolutely blown away by the quality of the bamboo material used, the thoughtfulness of the design, the craftsmanship and finish of all the CNC router work, and even little details like the simple, yet protective packaging. If the effort put into these smaller items translates up to the SlatePro desk....well, it's going to be stunning to behold and to utilize. My only "issue" is that I'm going to have to choose between the regular and the standup versions - both have their merits! :-)
And, no, I'm not affiliated with Nathan....some projects do have suspicious first-time backers (friends/family/employees) come on and act as shills....not me. I've backed 600 or so projects and rarely publicly endorse anything. In this case, I'm impressed suitably enough to make an exception.
Thanks! And, great question. If you scroll about half-way down the Kickstarter page, there will be a photograph of the desk from underneath. We provide cable/cord clips with each SlatePro that have an adhesive backing for easy/quick setup.
Nathan, i really like the clean design of the SlatePro, but i wonder how the underside of the desk looks like, I'm a bit worried i'll end up with a clean desk on the upside, but with a lot of cables and hardware at the underside
Hi Blaine - We would like to get into larger or different models but we wanted to first produce the SlatePro. We wanted to start with a standard and hightop desk for a single desk user first and then explore other options later. As for now, you will just want to push them together - that should work out great. Thanks for dropping a line.
Have you guys thought about more custom like a double wide or double depth? My fiance and i will be either putting them back to back or next to each other. But making them one piece?
Delio - you can back for two desks by multiplying the amount by two (2x $448). Thanks and we hope you enjoy your SlatePro's.
James - make sure to keep your seat in line. After funding has completed, you will receive an end of project survey (via email). It will list all 8 models. You will be able to select which model you would like shipped to you. Thanks, we are very excited to offer new SlatePro models.
How do I back two? Do I just double a pledge?
Wow! Very excited to see what the stretch goals add... I already pledged but hopefully I'll be able to change my pledge if I like something else?
Due to the success of the SlatePro so far, I will be posting an update this afternoon for three future stretch goals - giving us a total of 8 unique SlatePro models to select from. To make the material purchase possible, the final stretch goal will be set at $100,000. It's only been 4 days and we have passed $50k so it should happen! Thanks backers for being apart of the SlatePro and most importantly, helping it evolve even further.
Dominik - You will want to pull the cord slightly out of the dock when you remove the phone from your SlatePro. Similar to an Apple Product, the design of the SlatePro focuses on minimalism, so we opted against any additional notches or holes.