In order to use the hold from the $60 reward, you need to do two things:
-- Drill a small (0.15 inch) hole in your wall to run wires.
-- Connect the wires to a microcontroller (e.g. Arduino).
Basically any microcontroller will work. You could use an Arduino, a Maple, an AVR, a PIC, or anything else that can toggle a pin at ~800kHz.
An Arduino library for controlling the code is available here: https://github.com/adafruit/Adafruit_NeoPixel
Each hold has two independently controllable RGB LEDs arranged in a chain.