Funding Unsuccessful This project’s funding goal was not reached on .
Photo-main
Play
00:00
00:00

Bring your yard to life with LED based smart yard lights you control from your smartphone/tablet. Please join us in coloring the world

GlowLytes: Smart Landscape lighting

Are you tired of your yard looking the same all the time?  Do you want to do something that sets your yard apart from your neighbor's?  We did too, so we invented GlowLytes - the smart, LED based yard lighting system that you control with your smartphone or tablet.

With GlowLytes you may never need to buy yard lights again.  You can redecorate your yard any time you like with the convenience of your smartphone. At Christmastime you can have your lights reflect the season; when the Big Game is on you can display your team pride; during Halloween, your yard can be scary; on Valentines day, go hot pink & red; and the rest of the year your yard can look like everyone else's - if you must - all without ever changing a bulb.

GlowLytes are smart, LED based outdoor yard lights. The system includes a main controller and up to 32 lights, controlled by your Android or IOS device through WiFi.  The main control unit houses the WiFi controller and power supply.  Each light is connected to the controller using standard Cat5 networking cable (but the system is NOT an ethernet system). 

GlowLytes Features

Save Money and Energy 

GlowLytes use energy efficient RGB LEDs. You can save money on your electric bill and feel confident leaving the lights on all night long if you want.  Are you tired of changing burned out bulbs? The LEDs in GlowLytes may last for up to 50,000 hours.

GlowLytes use low-cost Cat5 cables; you can save money on the installation by doing it yourself in minutes. You don't even need to think about exposed wires, twisting wire ends, or sharp tools.

Convenience 

You can control GlowLytes from anywhere your WiFi reaches with the touch of your finger. GlowLytes connect to your home WiFi network and are controlled using your smartphone or tablet. (If you don't have a Wifi network, it doesn't matter. The GlowLytes controller can provide it's own WiFi network)

Prototype Android App Screenshots
Prototype Android App Screenshots

Simple and Flexible Operation 

Configure GlowLytes into custom scenes to quickly change your lights at any time.  You can change the color of individual lights or control them in groups. GlowLyte control is simple and intuitive and can be programmed to turn on and off according to your schedule. 

GlowLytes can be set to automatically turn on and off at predetermined times or use dusk or dawn to set the schedule.  By programming your lights to turn on at dusk you will never have to worry about reprogramming them for daylight savings time.

GlowLytes Are Fun! 

Rainbow GlowLytes
Rainbow GlowLytes

We have been playing with our lights through months of testing and they are a blast! Show the neighborhood your team colors; decorate for all the holidays; or any special occasion; and explore your creative side with the brilliant colors of GlowLytes.

GlowLytes Hardware 

Each GlowLytes system requires a main controller unit and between 1 and 32 lights.  The main controller is an embedded system running linux. 

GlowLytes System Prototype
GlowLytes System Prototype
GlowLyte Light Prototype
GlowLyte Light Prototype

Each light operates from a simple microcontroller, which implements the interface to the main controller and RGB LED control functions.  We are currently using prototype plastic parts printed in ABS on a 3D printer.  These parts will need to be injection molded for the production GlowLytes systems.

The GlowLytes system is easy to install.  You simply plug lights into the master control unit, plug into wall power, and connect to the WiFi network with your smartphone or tablet.

GlowLytes System Connections
GlowLytes System Connections

GlowLytes use standard Cat5 network cables as interconnects between the controller and the lights.  The cable carries power, and control lines that the lights use to communicate with the controller.  The GlowLytes system does not use ethernet or any associated networking technology to communicate with the lights.

We have built and tested 6 prototype versions of the lights and 3 versions of the master controller. We need funding to finalize the master controller design and move the prototypes into production. To produce our design we need to build 3 different plastic injection molds. These molds are for the "hood", "collar", and "post plug". We also need to finalize the graphics and software, and order large quantities of parts at volume pricing.

GlowLytes Software

Our plan for GlowLytes is to enable control from all Android and IOS devices.  We have developed all of the prototype hardware and control functions on the Android platform.  By focusing feature development on a single platform we have been able to quickly iterate through software and hardware communication prototypes.

During the course of our GlowLytes campaign we will continue to refine the GlowLytes app for Android.  Once the project is funded we will finalize the app design and begin building the IOS app.  Our IOS app is expected to be complete and submitted to the app store prior to delivery of the GlowLytes hardware.  We are not currently planning a Windows Mobile control app.

How GlowLytes Came to Be

Ross had the idea that became GlowLytes in 2010 while experimenting with RGB LEDs. And then he nearly abandoned it after attempting to illuminate his yard with the colored LEDs. The problem was that colored light on the foliage ended-up muted and dull.

Almost as an afterthought he experimented by placing a milk jug over the lights and was blown away by the brilliant color that resulted. The idea to use frosted 6 inch globes was born and worked started on the early prototypes immediately.

Ross reached out to Josh (a previous co-worker) to experiment with building a smartphone controlled version of the lights. A few weeks later an early demo version of the app was running and the result was magical.

The excitement for GlowLytes kept building as we worked on the prototype designs. In December 2012 we operated some working prototypes in our yards through the Christmas Season and received a huge response from our neighbors, family and friends. It seemed like everyone who saw the brilliant colors from the lights immediately wanted to buy some.

The GlowLytes design has gone through many iterations. In the original design, each prototype light had an external box to house the electronics. We saw that this meant the lights would cost far too much. So in early 2013 we eliminated the box and placed the circuit board directly into the globe itself, thus eliminating the box. It cut our costs by 35%.

We originally planned on using a lower cost microcontroller to communicate with the smartphone however the WiFi modules that we tried had many limitations and were difficult to use and integrate. We moved to an embedded linux module which drastically reduces the development complexity and increases the system reliability. The module is only slightly more than the microcontroller plus WiFi module combo, however it is much more capable.

 We have patiently continued to refined our design with 3 additional circuit board versions for the light design. Each one has been an improvement. We also resolved some communication issues relating to the networking cables. We overcame more cost challenges, and one by one, we worked through the issues until now we are confident with the electronic design. Our goal has been to create a reliable, and easy to use system and we are dedicated to continuing to this goal.

GlowLytes Light Prototypes
GlowLytes Light Prototypes

Development Schedule

During the Kickstarter campaign we'll continue testing GlowLytes prototypes and refining the app. Once the campaign is funded we'll freeze the hardware designs, order molds and parts for our production build.  Once the molds are complete we will order the production runs for our injection molded parts.  Concurrently with parts procurement, we will continue refining the Android and IOS apps.

Production Schedule
Production Schedule

We expect to begin shipping the complete GlowLytes systems to our backers by May 30th 2014.

Rewards

We are offering GlowLytes systems in configurations with a controller and either 2, 4, 6, 8, or 10 lights each.  All systems include a Cat5 cable and mounting post for all lights.

After our Kickstarter rewards have been fulfilled we will offer additional GlowLytes at www.glowlytes.com for those who want to expand their systems.

Risks and challenges Learn about accountability on Kickstarter

GlowLytes is a complex project involving software, hardware and multiple embedded controller platforms. GlowLytes now function better than we had anticipated, and we have an early version of the Android app finished. However, there are some risks to successful completion of this project. We are utilizing Cat5 cabling for our system which has never before been used in a yard lighting application. We also need to conduct additional testing and develop enhancements to ensure that the controller and lights meet our quality standards. We have established vendors for the majority of our components and verified our pricing plan based on our expected order volume and product configuration.

We are excited to bring GlowLytes to you and are dedicated to working through any challenges that we encounter through continued refinement of the system.

Please help us color the world.

Thank you very much for your support!

FAQ

  • A: We designed them for operation in the snow with an O-ring and compressed rubber seals. The CAT5 connections are sealed by the end user at installation with white electronic sealer (provided). We had 6 lights work with no problems through last winter even when they were completely buried in the snow.(by the way, they look just gorgeous in the deep snow) We are now testing more lights through this winter in the snow and if there are any indications of problems we will resolve them before our initial production run. Cold temperatures will not hurt the electronics. Thanks for the question.

    Last updated:
29
Backers
$8,067
pledged of $90,000 goal
0
seconds to go
  • Pledge $5 or more
    You selected

    6 backers

    THANK YOU FOR YOUR SUPPORT! You'll be helping to change the face of landscaping everywhere, and you'll get backer-only updates through the course of the project.

    Estimated delivery:
  • Pledge $30 or more
    You selected

    2 backers

    BACKER WITH PERKS - Get a GlowLytes tee shirt and help to change the face of landscaping everywhere. You'll also get all of the backer-only updates through the course of the project.

    Estimated delivery:
    Ships within the US only
  • Pledge $200 or more
    You selected

    2 backers Limited (98 left of 100)

    EARLY BIRD SPECIAL - GLOWLYTES CONDO KIT Get a GlowLytes controller and 2 lights. Each light includes a 14ft cable, and installation post.

    Estimated delivery:
    Add $20 USD to ship outside the US
  • Pledge $224 or more
    You selected

    0 backers

    GLOWLYTES CONDO KIT Get a GlowLytes controller and 2 lights. Each light includes a 14ft cable, and installation post.

    Estimated delivery:
    Add $20 USD to ship outside the US
  • Pledge $320 or more
    You selected

    4 backers

    GLOWLYTES COTTAGE KIT Get a GlowLytes controller and 4 lights. Each light includes a 14ft cable, and installation post.

    Estimated delivery:
    Add $20 USD to ship outside the US
  • Pledge $400 or more
    You selected

    6 backers

    GLOWLYTES GARDEN KIT Get a GlowLytes controller and 6 lights. Each light includes a 14ft cable, and installation post.

    Estimated delivery:
    Add $30 USD to ship outside the US
  • Pledge $490 or more
    You selected

    0 backers

    GLOWLYTES VILLA KIT Get a GlowLytes controller and 8 lights. Each light includes a 14ft cable, and installation post.

    Estimated delivery:
    Add $30 USD to ship outside the US
  • Pledge $570 or more
    You selected

    6 backers

    GLOWLYTES MANOR KIT Get a GlowLytes controller and 10 lights. Each light includes a 14ft cable, and installation post.

    Estimated delivery:
    Add $40 USD to ship outside the US
Funding period

- (45 days)