Digital Elf Outpost for 3D Printing : OpenLOCK Ready

by Jeremy Gosser

Jeremy Gosser wants some feedback on this project. What do you like? What could be better? Anything missing?

Leave feedback

No feedback yet! Be the first to leave feedback

This is not a live project. This is a draft shared by Jeremy Gosser for feedback.

Note that all projects must comply with the Kickstarter Rules to launch. Jeremy Gosser may disable this link at any time.

$0.00 pledged of $1,000 goal
backers
$0.00 pledged of $1,000 goal
backers

About

 Welcome to GameScape3D's new and Exciting Kickstarter offering. We are featuring an OpenLOCK Elf Outpost, OpenLOCK Triplex Tile Sets and Floors, And Several new buildings that feature our NEW OpenPeg modular INFINITE STACKING SYSTEM !! This stacking system will allow you to easily Kit Mash our building models with OpenLOCK tile sets! 

  • Snap Assembly. NO GLUE NEEDED!
  • NO Auto-Supports needed. Zero support printing, except for a few we put in on a couple of parts.
  • Requires a 6x5 build plate to print all basic files. Some stretch goals may require a slightly larger surface area.
  •  Open_[]_Peg Build System Introduced. Limitless freeform vertical stacking, it can be applied to other designers work too! System offers an alternate OpenLOCK stacking system and includes adapters to Kitmash OpenLOCK designs with our buildings. 
  •  Precision Design: All parts test printed and tweeked no less than three times for both dead-balls-on accuracy and easy assembly. 
  •  High resolution parts: All resolution and detail is jacked to the nines so your digital files will be timeless as 3D Printing improves.  
  • Many Bool Tools included for cutting your own doors, windows, and OpenPeg connectors.
  • This product fully compatible with our first kickstarter "Stronghold on the borderlands." We have posted a full set of OpenPeg plates for previous backers on that campaign page's update area. Go get yours if you backed us! It also includes many models that have been converted for one piece, support free printing.

Elvish Fort Wall Extensions and 2 Small elven houses available through stretch goals!

                                             OpenLOCK Overview

  • Two Basic expanded Sets of Triplex Walls featuring both full Interior and Exterior/interior mixed walls.
  •  7 floor tiles for each Triplex wall set, plus 5 dilapidated style timber floor tiles. 
  • 7 OpenPeg Conversion Plugs designed specifically for these seven OpenLOCK  Kit Mashing! See OpenPeg VIDEO for more details!
  •  Each Triplex set comes with 4 snap together, functioning door walls. These walls are designed to print without supports! Each SIze door comes with an interior/exterior and interior/interior base option.  

                                Openpeg Buildings Overview

  • 4 Basic building Shapes plus 2 more available through stretch goals.
  •  No Glue snap together windows and doors. The doors will be functional and there will be a window option for Plexiglas inserts. More window Options to open with stretch goals! Bool tools will be included so you can cut in your own windows or doors.
  •  4 basic roof designs and many smaller or specific use roof designs. More Roof designs available through stretch goals. 
  •  A Complete Blacksmith Design.

 This kickstarter is the first part of a two phase product. The second phase will include citadel walls (7 inches tall with 3.25 inch platforms!) and towers reaching as high as 15 inches! We will be completing an OpenLOCK keep and adding expansions to this kickstarter's product line. Below are some images and a video of the whole thing. It was divided because it became too large for me to deal with. A realization I came to when our "short" demo video ended up being twelve minutes ( and that was with a lot of cuts). We anticipate launching in late july. I will likely include a resin cast product at that time.

Click for Imgur Album 62 images
Click for Imgur Album 62 images

Risks and challenges

We have successfully completed one kickstarter with similar content which also included a resin cast product. All phases of that kickstarter were completed on or ahead of schedule. Risk is essentially zero, all models (aside from a couple stretch goals) are fully processed and test printed many times over in both ABS and PLA. This Kickstarter will be distributed through this campaign page and will include copious documentation as well. Go to this IMGUR album for more info on documentation. If necessary, stretchgoals will be distributed as a patch within four weeks of the initial distribution.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge $34 or more About $34

    All Digital Content *Early Bird*

    All Digital Content

    Less
    Estimated delivery
    Limited 0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge $48 or more About $48

    All Digital Content

    All Digital Content and related digital stretch goals!

    Less
    Estimated delivery
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge $99 or more About $99

    Commercial Manufacturing License

    Buy and Sell 3d prints or castings. Does NOT include digital distribution rights.

    Less
    Estimated delivery
    0 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.