Project image
)}
£2,381
pledged of £2,500pledged of £2,500 goal
10
backers
22days to go

All or nothing. This project will only be funded if it reaches its goal by Wed, September 11 2019 12:35 AM UTC +00:00.

£2,381
pledged of £2,500pledged of £2,500 goal
10
backers
22days to go

All or nothing. This project will only be funded if it reaches its goal by Wed, September 11 2019 12:35 AM UTC +00:00.

About

Since the Wanhao Duplicator 7 hit the Western market, people have been crying out for improvements...

 Revisions were made from v1.1 through to v1.5 which changed the PSU, slightly altered the Z-zxis and even added a touch screen to make the printer standalone, but these didn't fully cover the fan base wants and needs.

After countless mentions from Wanhao of a better UV array, and no sign of anything while they continue to make new printers, we have decided to take action.

With this in mind, Elmon ResinWorks are proud to present to you, the D7 Enhanced mSLA drop in upgrade.....

Bed of Nails test using the D7 Enhanced NanoDLP kit
Bed of Nails test using the D7 Enhanced NanoDLP kit

Elmon Enhanced D7/D7+ UV Array Upgrade:

The new, enhanced, UV array from Elmon is a 70 watt, 28 diode, parallel light source. This type of light source is usually used in high precision measurement equipment.  Due to the design (and each diode having a lens to magnify it); there is less light scattered, the unit produces higher contrast at the edges of the screen and it reduces reflections from diffusion. 

With the new light source also comes a new shroud and bottom case extension with new rack fittings for your boards, new fans and a reworked cooling system. You will now have 2x 50mm fans at the back of the machine (one either side) to keep the boards cool, and 3x 50mm fans under the array. Coupled with the heatsink, this is enough to keep the diodes from overheating, even on the longest prints. There is now also a 60mm fan on the front (camera right hand side) of the machine. This has been positioned to blow in directly between the array and LCD screen, stopping any build-up of warm air in the cavity, prolonging the life-span of your screen.

Kickstarter Price starting from: £250.00 + postage (RRP starting from £295.00)

Bed of space ships with close up shots of layers and fine supports (Low Odour Tough 50um)
Bed of space ships with close up shots of layers and fine supports (Low Odour Tough 50um)

Dual Linear Rail Z-Axis Upgrade:

A lot of people will argue that the weakest mechanical component on the D7 is the z-axis.. This is more prevalent on models prior to the v1.4 where the lead screw was left to spin freely and there was no support for the bearing carriage on the gantry. The v1.5 slightly improved on this by adding smooth rods to the axis, but it is still inferior to a lot of mSLA printers on the market. Included in this gripe is the way the build plate attaches to the gantry….

Well, here at Elmon we have designed a new z-axis and build plate attachment so you no longer have to worry about these issues! We’ve upgraded the z-axis to dual linear rails, instead of the smooth rods – this is a lot more stable as the rails are attached to the z bracket, which is screwed into the top plate of the bottom case, instead of resting inside holes, and being gripped with grub screws like the smooth rods. 

Kickstarter Price: £115.00 + postage v1.4 and previous + £30.00 (RRP £135.00) 

Each print as repeatable as the last! No longer will you be scratching your head as to why plates fail when they've previously printed!!
Each print as repeatable as the last! No longer will you be scratching your head as to why plates fail when they've previously printed!!

Tilt-Lid Upgrade:

 Kickstarter Price £60.00 + postage (RRP £75.00)

 project video thumbnail
Replay with sound
Play with
sound

Elmon D7 Enhanced Complete Kit:

The above upgrades are available as the following complete kits;

  • D7 Enhanced (Please select this version if you're running a tethered D7 or a D7/D7 Box and don't wish to have it as one unit)

Kickstarter Price: £350.00 + postage (RRP £395.00)

  • D7+ Enhanced (Please select this version if you have a D7+ or D7/D7 Box. This pledge is also for those already running an Rpi3 + Nextion. Message us if you have any questions!)

Kickstarter Price: £365.00 + postage (RRP: £410.00)

  • D7 NanoDLP Edition - Upgrade your Tethered D7 to nanoDLP! (Special Edition including RPi3, Nextion 3.5" Screen and 128 GB SD Card)

Kickstarter Price: £530.00 + postage (RRP: £560.00)

  • D7 Printable Upgrade Kit - We will send you the physical parts required via courier and email you the files to print yourself. You will require a printer that has a bed of at least 210x210mm

Kickstarter Price: £325.00 + postage (LIMITED KICKSTARTER SPECIAL)

Backers are also able to purchase multiple upgrade kits if needed

Resin for mSLA Printers:

We are also proud to present to you our new range of resins! We are releasing these through the kickstarter as they were developed to go alongside the upgrade. Print settings for Creation Workshop, Wanhao D7 Workshop and NanoDLP will be sent out with your orders, so if you want something to use with it right away; grab a bottle or 5!

Elmon Resin Works mSLA Resin (Left to Right): Water Washable, ABS, Low Odour (Tough), Elasticone, High-Flex
Elmon Resin Works mSLA Resin (Left to Right): Water Washable, ABS, Low Odour (Tough), Elasticone, High-Flex
  • Low Odour (Tough) - This resin has been developed with durability, precision, and comfort of printing in mind... With a shore hardness rating of 88D (one of the highest on the market) and very low odour levels, this resin is great for printing objects that need to be more durable and hard waring. The finish is incredibly smooth with minimal shrinkage.        

Kickstarter Price: £55 p/kilo + postage (RRP £60.00)

  • Water Washable - Please DO NOT put the water down the drain, into your garden or anywhere it may reach the water supply whilst it has uncured resin in. This is EXTREMELY dangerous to ourselves and the environment. You must make sure to fully cure the resin as you would when using IPA before disposal. This resin is rated with a shore hardness of 88D

Kickstarter Price: £75.00 p/kilo + postage (RRP £80.00)

  • ABS - Over the last 18 months or so, there have been a lot of people wanting a resin with properties that simulate ABS, this is due to its softer, less brittle, attributes making it suitable for model making and other, similar, practices. With it sill being a limited resin on the market we liaised with our chemists to see if they could achieve this, the results were outstanding! Our ABS-like resin has been developed to have anti-scratch properties, can be drilled, screwed or used for snap-fit joints, and, is 90% similar in composition to real ABS when post cured. It has a Shore hardness rating of 65D a tensile strength of 42-62MPa, and is rated at 11-21% for elongation on break.

Kickstarter Price: £85.00 p/kilo + postage (RRP £90.00)

  • Elasticone - This resin is by far the most elastic-like we have seen, with elongation at break rated up to an insane 200% it will stretch and squeeze however you might need it to! It's perfect for making negative moulds, elastic objects such as gaskets, etc...

Kickstarter Price: £100 p/kilo + postage (RRP £115.00)

  • High-Flex - With a tensile strength of 36-52Mpa this resin has been designed to provide a material that can bend/flex without breaking. This can be added to our own Water Washable and Low Odour Tough resins to add more flexibility once cured, this allows for much finer parts with less risk of breakage. It has the same shrinkage properties as our homogenous resins, so you don't have to worry about loss of details when using it! As well as this, it is also a low odour resin, so you shouldn't be gassed out while printing.

Kickstarter Price: £95.00 p/kilo + postage (RRP £110.00)

We will also be running a special Early Bird offer for backers where you can buy 1kg of each resin for £385.00 + postage, saving £35.00 (£90.00 RRP)! Be quick though, this will only have 10 slots!

 project video thumbnail
Replay with sound
Play with
sound

Replacement LCD Screens:

You can't have an upgrade kit without new screens, can you?  Yup! We've managed to source some extremely high quality LCD screens, for both the older and newer connecting boards on the D7. These are available as add-ons to your pledge.

LS055R1SX03: 

These screens are suitable for printers that have the old (green) connecting board. These boards should have this code written on them. 

LS055R1SX03 Screen - for printers containing green connecting boards
LS055R1SX03 Screen - for printers containing green connecting boards

LS055R1SX04: 

These screens are suitable for printers that have the new ("F" or black) connecting boards. These boards will either be blue and have an F printed on them, or will be black. 

LS055R1SX04 Screen - for printers containing "F"/black connecting boards
LS055R1SX04 Screen - for printers containing "F"/black connecting boards

Both types of LCD come with the backlight removed and a glass protector pre-installed on the front, saving you time when installing them and greatly reducing the risk of breakage during the process!!

Kickstarter price: starting from £50.00 + postage (RRP £60.00)

Elmon Enhanced 4k ALPHA Packages:

As if all the above wasn't enough, we've gone one further and are bringing you TWO 4k resolution packages!! 

Firstly we have the Elmon Enhanced 5.5" 4k....

The 5.5" Alpha, is a 3d printed 4k SLA printer (optional metal upgrades available late 2020) operating on nanoDLP using a Raspberry Pi 4 with a 128GB SD card for storage...

It will boast the same style z-axis and UV array, so you can rest assured prints will be smooth and consistent!

  • Optional additional 4k screen +£200.00 (saving £50 individually)

Kickstarter price: £1100.00 + postage (LIMITED KICKSTARTER SPECIAL)

Secondly, the Elmon Enhanced 12.5" 4k....

Using the same OS and screen resolution as the Enhanced 5.5" we have managed to make a complete freak of nature here....

The 12.5" screen equates to a build size of a staggering 277x156mm along with a longer, 250mm z-axis and still retains an incredible 72um x/y resolution - the same as an 8.9" 2k printer!!

Again, metal upgrades to replace the printed parts will be available for this toward the end of 2020...

PLEASE NOTE: The 4k printers are really for people who want to be at the forefront of the 3dp revolution and be the first to carve the way with next-generation developments. We have limited the spaces as the ALPHA models are development builds and we will want to work closely with you to find out where you would like us to take the idea for final release... please, only purchase if you're confident of your ability and want to help us push the market forwards!

  • Optional additional 4k screen +£300.00 (saving £50 individually)

Kickstarter price: £1450 + postage (LIMITED KICKSTARTER SPECIAL)

Stretch Goals!!

There are 2 important numbers for you to keep in mind with the stretch goals - £12,500.00 and £25,000.00 

£12,500.00: Once we hit our first stretch target, everybody who has pledged for the Z-Axis or a complete kit will receive the following;

  • Hand cast, blue, polyurethane thumb screws for the build plate mount, levelling adjustment screws and to hold the VAT in place! 
  • Secondary handle choice - you will now be able to choose between receiving a button knob or long handle for the Tilt-Lid upgrade!

We will also have a couple of STL models for Everyone who has backed a minimum of £55.00.....

  • Torture test models to make sure that your upgrade is installed properly
  •  1x printed, custom, drip stand- allowing you to leave the build plate to drip with the lid closed.
  •  1x test file of a 28-32mm futuristic tank from our first wargaming kickstarter we are planning to release early next year! 

£25,000.00: Once we hit the second target, anyone who has pledged £115.00 or more will receive the following;

  • 1x 400ml VAT
  • 1x custom VAT cover

Anyone who has pledged over £55.00 will receive an Artillery piece from our wargaming kickstarter and, finally, we will also release the tank to EVERY backer, even people who pledge £1 to support! 

This is our way of saying thank you for bringing the D7 Enhanced Upgrade Kit to life!

Risks and challenges

This project is almost certain to go through without any issues!

The Elmon print farm has been fully refurbished, more printers have been added ready to take the production load and we have spare motors, mainboards, extruders, etc. lined up ready to swap out in the event of malfunctions!

All of our electronic parts and sundries have been sourced, with hundreds (in some cases thousands) of components ready to be shipped as soon as payment is made...

Of course (due to the logistics of warehouses and international shipping...) some parts *could* end up being late, but we will be updating lead times for ALL components we've had to order constantly after the projects funding period has closed and we've received the money.

The biggest risk associated with this project is selling more units than we can produce in the time frame...

We have planned ahead for this; Elmon have secured a secondary operating facility within 10 minutes of the HQ, so will be able to run 2 print farms simultaneously - both will be monitored via remote cctv, and will also be manned independently.

If this did occur, it would put a slight delay on pledges being fulfilled due to needing to setup the new workshop - we estimate this to take no longer than 15 working days, so postage could be delayed by roughly 1 month. Backers would be notified if this happened, and we would ship units out in order of pledges received.

Apart from this, everything else is secure - we have tested several iterations of this design over the last few months, and the upgrade is working better than expected, feedback on the aesthetics has been well received, with quotes likening it to a Ferrari in terms of style!

Thanks to the use of the Rpi4 - the 4k system is working very well! We have also included another fan at the front to help make the cavity cooler - this has been done to counter the excess heat that is generated because of the longer cure times needed on a 4k screen.

Learn about accountability on Kickstarter
Questions about this project? Check out the FAQ

Support

  1. Make a pledge without a reward

    £
    About $12

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge £1 or more About $1.21

    THANK YOU!

    A big THANK YOU for believing in us and being a part of the Elmon community. As a member of the Elmon community, you will receive our awesome updates and be front and centre in our honourable mentions on our website.

    Less
    Estimated delivery
    0 backers
    £
    About $1.21

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge £50 or more About $60

    5.5" 2k LCD Panel - LS055R1SX03/04

    Elmon D7 Replacement 5.5" 2k LCD Panel - LS055R1SX03 / LS055R1SX04

    Screens are shipped ready to fit into a machine. Backlights have been removed and protective glass has been installed on the front.

    For 2 Screens add £47.50 to your pledge

    For 3 screens add £95.00 to your pledge

    The LS055R1SX03 is for Duplicator 7 printers with the old (green) MiPi board. The LS055R1SX04 screen is for the newer (F) board, please let us know when pledging which you will require!

    Shipments of this product will be made by 31/12/2019, the item will be on general release to the public by 15/04/2020.

    Both domestic and international packages are shipped with tracking and insurance

    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    £
    About $60

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge £55 or more About $66

    Elmon Resin Works Various Resins 1kg

    Elmon Resin Works - Various Resins 1kg

    Be the first to get your hands on our new resins before they hit the mass market!

    We have the following Resins available;

    Low Odour Tough (Available in; Grey, White, Black, Skin, Purple)
    Water Washable (Available in; Grey, White, Black, Skin, Purple) add £20.00 to your pledge
    ABS (Grey) add £30.00 to your pledge
    High-Flex (Clear,White, Black) add £40.00 to your pledge
    Elasticone (Clear, White, Black) add £45.00 to your pledge

    If you want to add more to your pledge or have any questions, please ask!

    Shipments of this product will be made by 31/12/2019, the item will be on general release to the public by 01/02/2020.

    Both domestic and international postage are tracked and insured.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    £
    About $66

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge £60 or more About $73

    Elmon D7 Enhanced Tilt-Lid Upgrade

    1 Elmon D7 Tilting Lid.

    Be the first to get the enhanced tilting lid at £15.00 off future retail price!

    This product has been designed to mount the back of the lid to the printer, enabling us to hinge the front of the lid so that it doesn't need to be removed any more, this saves on the height needed for the space the printer is kept in, as well as keeping the footprint of the machine down when cleaning, the lid has catches to hold it closed as well as brackets to keep the front lifted, unaided; for maintenance, removing prints, etc.

    Please let us know when pledging which version of the D7 you have, in order for us to supply the correct tiliting lid package for seamless replacement!

    Shipments of this product will be made by 31/12/2019, the item will be on general release to the public by 15/04/2020.

    Both domestic and international postage are tracked and insured.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    1 backer
    £
    About $73

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge £115 or more About $139

    Elmon D7 Enhanced Z-Axis

    1x Elmon D7 Enhanced Z-Axis.

    Be the first to get the enhanced Z-axis at £20.00 off future retail price!

    This product has been designed to strengthen the Z-Axis, enabling faster, smoother prints. Utilising 2, high quality, linear guide rails with a brand new, anodised aluminium bracket to hold them to the printer, as well as, a new attachment block and plate mount kit to go with your existing build surface.

    Please let us know when pledging which version of the D7 you have, if it is before v1.5 you will need a new top plate. Please add £30 to your pledge.

    Shipments of this product will be made by 31/12/2019, the item will be on general release to the public by 15/04/2020.

    Both domestic and international postage are tracked and insured.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    1 backer
    £
    About $139

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Select this reward

    Pledge £210 or more About $254

    Elmon D7 Enhanced UV Array: PRINTABLE

    1x Elmon D7 Enhanced UV Array + Lower Casing for TETHERED D7 v1.3, v1.4, v1.5

    Be the first to get the enhanced UV array PRINTABLE files for the UV array! (Kickstarter Pledge ONLY)

    This Array and Lower casing is a complete overhaul for the D7! Consisting of a 70w Matrix, new internal cooling system, DC-DC buck converter to power the array, as well as new racks for the electronic components.

    The upgrade improves airflow and produces a uniformed light distribution across the whole LCD. The higher wattage array also gives quicker curing times, while the new cooling system helps with longevity of the LCD.

    When ordering, please make sure to let us know which version of the Duplicator 7 you have, in order for us to send the correct parts.

    Please note, this is limited to 5 backers!

    Shipments of this product will be made by 31/12/2019, the item will be on general release to the public by 15/04/2020.

    Both domestic and international postage are tracked and insured.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited (1 left of 5) 4 backers
    £
    About $254

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  8. Select this reward

    Pledge £250 or more About $302

    Elmon D7 Enhanced UV Array Kit

    1x Elmon D7 Enhanced UV Array + Lower Casing for TETHERED D7 v1.3, v1.4, v1.5

    Be the first to get the enhanced UV array for the d7+ at £50.00 off future retail price!

    This Array and Lower casing is a complete overhaul for the D7! Consisting of a 70w Matrix, new internal cooling system, DC-DC buck converter to power the array, as well as new racks for the electronic components.

    The upgrade improves airflow and produces a uniformed light distribution across the whole LCD. The higher wattage array also gives quicker curing times, while the new cooling system helps with longevity of the LCD.

    When ordering, please make sure to let us know which version of the Duplicator 7 you have, in order for us to send the correct parts.

    Shipments of this product will be made by 31/12/2019, the item will be on general release to the public by 15/04/2020.

    Both domestic and international postage are tracked and insured.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    £
    About $302

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  9. Select this reward

    Pledge £275 or more About $332

    Elmon D7+ Enhanced UV Array Kit

    1x Elmon D7 Enhanced UV Array + Lower Casing for D7 V1.5+

    Be the first to get the enhanced UV array for the d7+ at £50.00 off future retail price!

    This Array and Lower casing is a complete overhaul for the D7! Consisting of a 70w Matrix, new internal cooling system, DC-DC buck converter to power the array, as well as new racks for the electronic components.

    The upgrade improves airflow and produces a uniformed light distribution across the whole LCD. The higher wattage array also gives quicker curing times, while the new cooling system helps with longevity of the LCD.

    Shipments of this product will be made by 31/12/2019, the item will be on general release to the public by 15/04/2020.

    Both domestic and international postage are tracked and insured.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    £
    About $332

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  10. Select this reward

    Pledge £325 or more About $393

    EARLY BIRD D7 Enhanced Complete Kit

    1x Elmon D7 Enhanced Complete Upgrade for TETHERED D7 v1.5

    This pledge contains the Tilting Lid, Z-Axis and UV Array Upgrade kit and is suitable for the D7 v1.5

    You may purchase additional kits inside of your pledge for £330.00 each.

    You may also purchase additional screens for your printer (+£50.00 for 1, +£97.50 for 2, +£145.00 for 3)

    Shipments of this product will be made by 15/01/2020, the item will be on general release to the public by 15/04/2020.

    Please remember to let us know your D7 version when pledging to get the right kit!

    Both domestic and international postage are tracked and insured.

    Be quick! Only 15 of these are available!

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited (2 left of 5) 3 backers
    £
    About $393

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  11. Select this reward

    Pledge £325 or more About $393

    Elmon Enhanced Complete Kit: PRINTABLE

    1x Elmon D7 Enhanced Complete Upgrade Kit (PRINTABLE FILES)

    PLEASE NOTE: This pledge will require you to have a printer with AT LEAST 210mm x/y. These files CANNOT be redistributed either digitally or physically.

    Be the first to get the enhanced complete upgrade kit (PRINTABLE FILES). This kit is limited to 10 backers and available in the Kickstarter ONLY.

    This pledge contains the files for both D7 and D7+ kits (exc. nanoDLP). All of the mechanical parts/fittings/etc will be shipped out to you, and the files will be emailed to you along with tracking information.

    You may purchase additional kits inside of your pledge for £300.00 each.

    You may also purchase additional screens for your printer (+£50.00 for 1, +£97.50 for 2, +£145.00 for 3)
    Shipments of this product will be made by 31/01/2020, This kit is NOT available outside of the campaign.

    Both domestic and international postage are tracked and insured.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited (10 left of 10) 0 backers
    £
    About $393

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  12. Select this reward

    Pledge £340 or more About $411

    EARLY BIRD D7+ Enhanced Complete Kit

    1x Elmon D7 Enhanced Complete Upgrade for D7 V1.5+

    This pledge contains the Tilting Lid, Z-Axis and UV Array Upgrade kit and is suitable for the D7 v1.5+

    You may purchase additional kits inside of your pledge for £345.00 each.

    You may also purchase additional screens for your printer (+£50.00 for 1, +£97.50 for 2, +£145.00 for 3)

    Shipments of this product will be made by 15/01/2020, the item will be on general release to the public by 15/04/2020.

    Both domestic and international postage are tracked and insured.

    Be quick! Only 5 of these pledges are available!

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited (5 left of 5) 0 backers
    £
    About $411

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  13. Select this reward

    Pledge £350 or more About $423

    Elmon D7 Enhanced Complete Kit

    1x Elmon D7 Enhanced Complete Upgrade for TETHERED D7 v1.3, v1.4, v1.5

    Be the first to get the enhanced complete upgrade kit for the D7 at £45.00 off future retail price!

    This pledge contains the Tilting Lid, Z-Axis and UV Array Upgrade kit and is suitable for the D7 v1.5 / D7 v1.5 with box if you want to keep it standalone

    You may purchase additional kits inside of your pledge for £330.00 each.

    You may also purchase additional screens for your printer (+£50.00 for 1, +£97.50 for 2, +£145.00 for 3)
    Shipments of this product will be made by 31/12/2019, the item will be on general release to the public by 15/04/2020.

    Please remember to let us know your D7 version when pledging to get the right kit!

    Both domestic and international postage are tracked and insured.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    £
    About $423

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  14. Select this reward

    Pledge £365 or more About $441

    Elmon D7+ Enhanced Complete Kit

    1x Elmon D7 Enhanced Complete Upgrade for D7 V1.5+

    This pledge contains the Tilting Lid, Z-Axis and UV Array Upgrade (2) kit and is suitable for the D7 v1.5+

    You may purchase additional kits inside of your pledge for £345.00 each.

    You may also purchase additional screens for your printer (+£50.00 for 1, +£97.50 for 2, +£145.00 for 3)

    Shipments of this product will be made by 31/12/2019, the item will be on general release to the public by 15/04/2020.

    Both domestic and international postage are tracked and insured.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    £
    About $441

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  15. Select this reward

    Pledge £385 or more About $465

    EARLY BIRD Elmon Resin Testers Pack

    EARLY BIRD Elmon Resin Testers Pack

    Be the first to get your hands on 1kg of each of our new resins at £90.00 off future retail price!

    This pack will contain; 1x Low Odour Tough, 1x Water Washable, 1x ABS, 1x High-Flex and 1x Elasticone

    Low Odour Tough and Water Washable are available in; Black, White, Grey, Purple or Skin
    ABS is available in Grey
    High-Flex is available in Clear
    Elasticone is available in Clear or Black

    Shipments of this product will be made by 31/12/2019, the item will be on general release to the public by 01/02/2020.

    Both domestic and international postage are tracked and insured.

    Be quick! We only have 15 spaces available for this reward!

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited (15 left of 15) 0 backers
    £
    About $465

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  16. Select this reward

    Pledge £530 or more About $641

    Elmon D7 Enhanced NanoDLP Kit

    Be the first to get the enhanced NanoDLP upgrade kit for the D7 at £40.00 off future retail price!

    This pledge contains the Tilting Lid, Z-Axis and UV Array Upgrade kit and is suitable for the D7 v1.5

    PLEASE NOTE: This kit also contains a Raspberry Pi 3 and Nextion 3.5" touch screen screen with a preloaded 64gb SD card, as well as an external PSU to replace the internal. Everything is powered on via one switch.

    You may purchase additional kits inside of your pledge for £500.00 each.

    You may also purchase additional screens for your printer (+£50.00 for 1, +£97.50 for 2, +£150.00 for 3)

    Shipments of this product will be made by 31/12/2019, the item will be on general release to the public by 15/04/2020.

    Please remember to let us know your D7 version when pledging to get the right kit!

    Both domestic and international postage are tracked and insured.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    0 backers
    £
    About $641

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  17. Select this reward

    Pledge £1,100 or more About $1,330

    Elmon Enhanced 5.5" 4k ALPHA

    Elmon Enhanced 5.5" 4k ALPHA.

    Be one of 25 people to own the Elmon Enhanced 5.5" 4k ALPHA!!

    We have decided to go the whole way with this one now and just make a brand new printer to go alongside the Upgrade kit! This printer take the basics from the elmon upgrade kit and puts them into overdrive! With a new chassis, a different mainboard and much higher resolution prints (31um x/y).

    As it's an ALPHA kit, this will be 3d printed for now, however, there will be metal upgrades available in time. The current price reflects this....

    THIS IS A COMPLETE PRINTER!!

    Backers will be limited to 25 spaces, however, multiple kits can be added to your pledge for £1100 each.

    Extra 4k Screens can be purchased, please add £200 to your pledge!

    Shipments of this product will be made by 28/02/2020, This package is limited to the campaign only! Make sure to secure yours!!

    Both domestic and international postage are tracked and insured.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited (25 left of 25) 0 backers
    £
    About $1,330

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  18. Select this reward

    Pledge £1,450 or more About $1,753

    Elmon Enhanced 12.5" 4k LF ALPHA

    Elmon Enhanced 12.5" 4k LF ALPHA.

    Be one of 15 people to own the Elmon Enhanced 12.5" 4k LF ALPHA!!

    Not only are we offering 25x 5.5" 4k printers, we have 15x 12.5" 4k printers too!! Get in now and experience the best in large format, high res, printing!!

    The 12.5" screen equates to a build size of a staggering 277x156mm along with a longer, 250mm z-axis and still retains an incredible 72um - the same resolution as an 8.9" 2k printer!!

    As it's an ALPHA kit, this will be 3d printed for now, however, there will be metal upgrades available in time. The current price reflects this....

    THIS IS A COMPLETE PRINTER!!

    Backers will be limited to 15 spaces, however, multiple kits can be added to your pledge for £1300 each.

    Extra 4k Screens can be purchased, please add £300 to your pledge!

    Shipments of this product will be made by 28/02/2020, This package is limited to the campaign only! Make sure to secure yours!!

    Both domestic and international postage are tracked and insured.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    Limited (15 left of 15) 0 backers
    £
    About $1,753

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.