Use this space to cheer the creator along, and talk to your fellow backers.
Have a question?
Wow! what a finish and a jump start for your project. Thank you for allowing me to share in your journey and excitment. thanks for sharing
I'm really excited fo you guys. Can't wait to see how things shape up. Congratulations!
Amazing. I can't wait until I can get my students' hands on this! They will learn so much.
Thanks for your high quality idea and supporting work.
1 hour to go!! Wow you guys rock!!
Wow! seeing all the support is super. And you guys have done good keeping us updated and working throught the early kickstarter flub. This shows all believe the project is sure to be a Great one. Looking forward to seeing the design tank fill up by creative collaborators. I am on the edge of my Chair ( SketchChair) to see the finish. Wow! way to go guys
Hi Donna. To pledge for an additional chair for your friend. You will need to increase your existing pledge to the correct amount for both pledges, then send us a message or email with your friends reward choice and address. We'll make sure that we send the additional chair to your friend. Thank you for the support!
I want to pledge for a friend who doesn't have a credit card. How do I make sure it's in her name but I pay for it?
Thanks guys! Jacob - the antler chair design will be freely available on to our collaborators on SketchChair.cc, then will be available for anyone to download once SketchChair has been publicly released.
Scott - If you would like more than one pledge reward, just pledge the correct total amount and send us a message, we will make sure you get all your rewards!
Are you releasing/selling the antler or other design files?
Just wanted to say that this is probably the most exciting project I have seen. This really does open the idea to OPEN SOURCE furniture. I can say that we're going to be using a ton of sketchChair furniture in our Brewery, and Im making one for the day job as well!
Hi guys - so excited about seeing this come to life.
Question has sort of been asked before: is it possible to request multiple Reward Selections with the same KickStarter account? I am already a collaborator, but want the Antler Chair as well and the minis!! Hell - I want them all :o)
Hi Donna, thanks for your question. A few days after the campaign finishes we'll be contacting collaborators with a username and password to login to the SketchChair.cc collaborator space. This is where you will have access to the latest version of SketchChair and other collaborator features.
Can you give us some idea of how the collaborators will be notified and able to access the software when the project funds next week?
What format will be used for the exporting? Any chance there will be a way to export to DFX for editing in other programs? (IE: export the cut paths to a DFX so we can import into another cnc program like vcarve/aspire for further editing.. kids chair, be able to add a name in aspire, etc) Thanks!
Hi Simone, thanks for your question. Our pledge rewards are not accumulative, so early access to the software is only available to those who opt to be collaborators with the $20 pledge reward. Phil, our collaborators will also become early members of the online community, which will launch shortly after the campaign finishes. Once the public release of SketchChair is finished, the community will also go public and anybody will be able to sign up.
Emily, yes definately! Services like TechShop will be a great resource for SketchChair users, and we hope that we will be able to build connections with these within the SketchChair community.
Alejandro, thank you for your interest in a personalised SketchChair collaboration, but unfortunately we do not have the resources to offer any more of these for the time being. We hope that we might be able to offer some more of these in the future, so keep an eye on SketchChair.cc for news about this.
You can open another commitment of over $ 1.000
Hi, I really like your project!
I have a small question, if I pledge 25$ I will get a miniature and also I will able to try your software? Or I must to pledge 20$ to try the software?
Thanks a lot!
Do you know about TechShop in the States? It's like a gym membership for stuff like laser cutters and shopbots. Perfect fit!
Perhaps determine the overall cost in time and effort to port it to iOS, the create a another campaign since this one was successful. I'd contribute again for that--I'm sure most iPad owners who supported this would as well.
Now ... where is the SketchChair online community, hehe. Is this being created after the campaign?
Hello Phil, excited to have you on board!
Thanks for the suggestion, we have considered putting SketchChair on the iPad, in exhibitions we've displayed the software on a Wacom Cintiq and on other touch screens and this works great! however since the software is written in Java it's more likely that you will see SketchChair on a Android tablet before the iPad.
Hi Nick and Valya thank you for your words of support, can't wait to get the software out to you two.
Valya, thank you for the nice comments!
I need the funding process to finish so I can get my spiffy SketchChair software! :-) Can't wait!
Say hello to your newest backer, though you reached your goal already. This is such an outstanding idea, I'm glad to be a part of it. It seems as if the program in your mock-ups is Mac. That works for me but have you considered an iPad app. I think something like this would be ideally suited for a touch based interface. I'd be willing to beta it. Anyway great project, good luck in all things. I plan on joining your online community shortly.
I'm excited to be a backer on this project, and very excited to see you've already exceeded your goal.
As this project begins to flesh out, I see potential in ultimately customizable "chairing"/"furnituring" for craftsmen, artists, people with disabilities,and more, in the ability to make exact body shape and form "furnituring," even for a given situational use or area.
This is a perfect example of how using innovative technologies, visionary thinking, and leadership skills take a flagship idea into quick, sensitive, and sensible action.
Hi Aaron, sorry but we are offering the SketchChair miniatures and the option of becoming a collaborator seperately. However, collaborators will also have access to the patterns for the miniatures, allowing them to cut their own if they like.
Hey everybody thanks for the complements! Great idea with the kinect Jim, we knew right away that SketchChair would be very suited to this. We have focussed on making a tool that is accessible to anybody, and so have avoided making a kinect specific tool, but we hope to look at this in the future!
Rina, thanks for the feedback. In an earlier version of sketchChair we were doing some structural testing which would allow for testing different user weights in the program. This has been taken out for the time being as it was a little cumbersome but we hope to put it back in later. SketchChairs can already quite robust in ply, but it would be possible to easily make it stronger by using thicker ply or stronger materials. We realise that SketchChair could be a great tool for providing specialised chairs and stronger/larger than normal chairs would be a good example of this!
have you considered body scanning with kinects for better testing of the body in the chair?
BIG congratulations with getting the funding! As a furniture and interior designer I'm very excited about being able to download the software and get designing :)
Oh my goodness! This is awesome. I'm an Interior Designer and have always dreamed of helping my clients create a "personal brand" for themselves and what better way than helping them create a custom piece of furniture. I can't wait to see this become a reality as well. :]
Congratulations on exceeding the funding goals. Can't wait to see this become a reality.
Just a quick note: Nothing in your materials here on Kickstarter mention taking into account weight limits. Some of us, especially out here in the U.S., are large and heavy. Since it's often difficult to find sturdy chairs for us in the first place, this would be a great service to have available. But if the weight limits are going to be determined by thin tabs of plywood, we won't be able to use this. Please discuss if the manufacturing operations could make these out of other materials, like thick solid lumber, or even metals. Thanks!
if i pledge 25$, do i have to choose between the miniature and becoming a collaborator? it would sure be nice to have both :)
The author of this comment has been deleted.
What a cracking project. I love getting rapid-prototype parts back from the 3D printer, but think the technology will become much more interesting (and beneficial) once this tech isn't just available to people in wealthy institutions! Good job guys.
Hey thanks For all the questions and comments.
Matt, We'll either host SketchChair's source code on github, Google Code or Bitbucket.
Jim, We are exploring whether SketchChair will generate gcode but we think that it is generally better for the machine operator to generate the gcode using the software and settings tailored to the CNC machine.
Carla, thank you for the comment, nice project!
Jonathan, Sorry about the confusion but I'm afraid we need to stick to our plan on this one. The prototype release of SketchChair will be available to collaborator pledgers after the campaign is completed.
This is a great project! Will you be hosting the code on github once the funding goal is achieved?
Will you have an export to gcode?
Awesome project! I've been involved in downloadable design efforts for the last few years with my Directives line of furniture:
It's been an exciting ride. I'm glad to see you guys pushing the envelope, and psyched to be a part of it.
Hey there. I didn't realize that you weren't going to send out the software until the project finishes. :-(
Any chance that you'd release the software to the $20+ backers once you reach the funding goal instead? Pretty please with sugar on top?!?!
Just like being a kid again, waiting for Christmas day! Only way , way worse. almost there!
truly useful and expressional use of software. I have a chair design in works for your software and hope you guys will make use of it. I will share all the imput I can for your developement by cutting out designs on shopbot cnc. I look forward to seeing all the global design ideas . what a great concept that will surely happen.
When you release the beta I will certainly cut some chairs on my Shopbot CNC and share any feedback I might have.
Hi Jeffrey, thanks! Good questions - at the moment we have multiple export formats for the cutting paths: dxf, svg, pdf and are open to suggestions for more!
We're striving to make it possible to produce chairs straight from the program without any tedious manual editing. The software takes an adjustable kerf into account and it's also possible to add details to joints to compensate for bit radius and ensure a good fit. We're also looking at how we might add "nodes" to help with getting a snug joints. (http://blog.ponoko.com/2008/11/03/how-to-create-better-nodes/)
We are in discussion with regards to providing a direct portal to cutting from the software or SketchChair.cc, but we are unable to provide any details at the moment.
Hi Eduardo! none taken! Thank you for the support!
Hey! I was just kidding, ok? No hard feelings. My best wishes for you.
Congratulations for the great Idea. I am a furniture designer myself and you will ruin my career but thats ok. The idea deserves to be backed. Good luck guys
I have a few technical questions. No rush for the answers, just curious. Have you chosen a Rilke format yet? Also, will the software take bit radius/laser kerf into account or will that be up to the person actually cutting it out to compensate for? Also, are you creating some sort of direct portal to Ponoko/1000kgarages, or are they just your examples of existing places to get stuff cut out?
Great project! I look forward to seeing how it will change my work flow for cnc furniture.
Hi DoTank, as with all of our pledge rewards, we will realise these once the campaign finishes. We will give all our collaborators access to the software shortly after may 12th if we reach the funding goal.
If we pledge $20 will we receive access to the prerelease now or when the project is backed?
This is an amazing idea!! I think it truly makes design an accessible dream to individuals like me, who once thought that things like this (building your own furniture) could only be achieved through connections within an industry, an extensive knowledge of materials and physics, etc. Thank you for creating something so versatile and sharing it with others!
Awesome project! Good luck!