Share this project

Done

Share this project

Done
A clean and elegant personal 3D printer built on a delta robot platform.
A clean and elegant personal 3D printer built on a delta robot platform.
231 backers pledged $152,597 to help bring this project to life.

Use this space to cheer the creator along, and talk to your fellow backers.

Have a question?

Only backers can post comments. Log In
    1. Steve Sutherland
      Superbacker
      on February 12, 2016

      Just a quick note to say thank you again! With the exception of some PLA which it doesn't like, our Deltamaker continues to operate beautifully - very reliable! We appreciate the periodic software updates too - certainly one of the best Kickstarter rewards ever!

    2. Heri Sim
      Superbacker
      on April 28, 2015

      Hi Albert, have you received your printer yet? I am holding back payment till you get yours.

    3. Missing avatar

      Albert Choo on October 10, 2014

      Hello Creator, I have already paid you USD450 shipping charge to Singapore through paypal, kindly advise as to when would you ship my 3d printer?

    4. Missing avatar

      Albert Choo on October 10, 2014

      Hello Creator, I have already paid you USD450 shipping charge to Singapore through paypal, kindly advise as to when would you ship my 3d printer?

    5. Missing avatar

      Albert Choo on October 2, 2014

      Hello creator. I am still not received any alternative shipping method from you since our last discussion on august. If you can‘t find any, at least give me a reply.

    6. Missing avatar

      Phil Houston on September 11, 2014

      Received my Deltamaker three days ago in perfect condition. I've been printing almost continuously since. Lots of fun things and some useful objects as well. The longest print took 20 hours and completed without any problem. I must say, it did work right out of the box. Thanks for a well made machine. It was worth the wait.

    7. Paul Brown on August 25, 2014

      Received mine, went through the setup and was printing in no time. The auto bed mapping makes all the difference.

    8. SaltyBrains
      Superbacker
      on August 13, 2014

      been using it a week - and still thrilled! the auto bed mapping and software make it such a pleasure to use over my other 3d printer (1st generation reprap, about 4 years old! and always needing tweaks and adjustments) -- this is brilliant and the quality of the prints is amazing. im just using PLA but its really nice. thanks again!

    9. Steve Sutherland
      Superbacker
      on August 10, 2014

      "Early Adopter" received in great condition last week here in Canada - super machine! Hoping to see heated platform for ABS availability before year end.

    10. John Boreczky
      Superbacker
      on August 8, 2014

      Wonderful device arrived in Palo Alto, CA and is getting lots of oohs and aahs from colleagues who don't notice the Cartesian 3D printers anymore.

    11. Missing avatar

      Justin Henley on August 8, 2014

      Great news on update #33. Well done and thank you for the progress update.

    12. SaltyBrains
      Superbacker
      on August 5, 2014

      i just received mine! unpacked as described and was up and running within 10 minutes - wow it is an incredibly beautiful and well designed machine! a lot sturdier and imposing that i first thought it would be.

      i am absolutely thrilled!

      (btw : i am in australia, and it was sent via dhl, i also had to pay 250aud in taxes to receive, but i dont mind now that i have it!)

      THANKYOU DELTAMAKER! :)

    13. Heri Sim
      Superbacker
      on August 4, 2014

      For those who need carbon fibre rods as an upgrade, this might be a good place to get them. https://www.kickstarter.com/projects/1861436648/griffin-pro-3d-printers/comments

    14. Heri Sim
      Superbacker
      on August 3, 2014

      Look at the awesome heated beds here: https://www.kickstarter.com/projects/1784037324/bi-v20-a-self-replicating-high-precision-3d-printe/posts/932691

      But they are using plastic joins and plastic carriages... Wonder what would be the wear and tear...

    15. Missing avatar

      Lawrence Bell on July 29, 2014

      Would like to see an update. It has been over two months since your last update of May 20, 2014. It would also be nice to know how many of the 109 DeltaMakers have been shipped.
      This Question has been asked on April 28, and yet to be answered.
      Patiently awaiting delivery.

    16. martin kopplow on July 27, 2014

      I'm sorry I did not mention this any earlier: I got mine shipped internationally (Germany) about three weeks ago. As you can imagine, I was too busy playing around with it since, to even think of commenting about it her.
      Taxes were a blow, but that was to be expected. When I got it, though, it ran pretty well right out of the box. I had a bit of a learning curve, made minor adjustments, but am getting reliable prints fom it all the time. I'd still like the headted bed before winter, though. Is there any progress on that side, or will I have to make my own?

    17. SaltyBrains
      Superbacker
      on July 26, 2014

      woohoo! iv been contacted to pay for the international shipping and its coming next week! thanks! :) [australian address]

    18. Missing avatar

      David Calderwood on July 18, 2014

      Can we have international shipment updates. I'm in the UK and you are not replying to my requests for an update. You still in business??????????

    19. Heri Sim
      Superbacker
      on July 17, 2014

      Hi there,
      What is the status of my printer?
      How is the state of the company? Have not heard much news from you guys.

    20. SaltyBrains
      Superbacker
      on July 9, 2014

      cant wait to get it! - hope its soon! iv made a space for it on my bench and everything :)

    21. SaltyBrains
      Superbacker
      on July 7, 2014

      im getting really anxious about this, its been a long time others have their printers and my backer level said "early adopter" and "you are among the first to take delivery" and "Your DeltaMaker will be produced with the earliest run of production printers" ...

      it never said "unless your not in the united states, then you get pushed to the end of the list" which is what is sort of happening here isn't it ? :(

    22. Missing avatar

      Justin Henley on July 6, 2014

      Really keen to know when shipments to UK might start. Sounds like things are progressing well now and there are lots of happy backers. Looking forward to joining in the fun too soon I hope! Have a good vacation and looking forward to hearing back from you.

    23. DeltaMaker Creator on July 5, 2014

      @Jason, good point about this being "vacation season". We have started contacting our backers prior to shipping their printers, to ensure they are available to receive the delivery.
      @Paul, international shipments have begun, and we will be sending out payment instructions for our international backers over the next few weeks.
      Other news: I will be out of the office this week, and not be able to respond to email until the following week. Our customer support team is available, so please feel free to contact support@deltamaker.com with any urgent issues. Our manufacturing team is also working this week, and making great progress. When I'm back in the office, I will prepare a delivery schedule to help you estimate when to expect your DeltaMaker. We are on track to ship our remaining Kickstarter rewards before the end of the summer -- more details to follow.
      --Bob

    24. Missing avatar

      Jason Doege on June 29, 2014

      My printer shipped. Of course, it would ship immediately after I set off on a 3 week vacation. Good thing I had neighbors checking on the house. Anyway, I'm back now and have unboxed it and it looks pretty much like I expected, a nice and solid device. I have not gone through the setup process, yet. More comments to come once I print a thing.

    25. SaltyBrains
      Superbacker
      on June 28, 2014

      thanks. i'm eagerly anticipating playing with it!

    26. Missing avatar

      greg
      Superbacker
      on June 26, 2014

      I've given up on this as it's been way too long to start International shipping. Email and message sent for a refund...

    27. Missing avatar

      MARCO VERGARA
      Superbacker
      on June 21, 2014

      Just arrive yesterday, tomorrow will be a busy day unpacking and running the printer!!!

    28. Paul Brown on June 18, 2014

      When will the international sipments start?

    29. Titanium
      Superbacker
      on June 17, 2014

      I still to wait mine!!!!! I'm from Iowa.

    30. DeltaMaker Creator on June 12, 2014

      Steve, Greg, Salty: International shipments are progressing.
      Jason: Thanks for posting the link to our group. All backers should have access to this private group. If anyone is unable to get in, please send us a message.
      One more thing... We have installed a DropCam at our office. If you're interested, you are welcome to watch a live stream of some DeltaMakers conducting their burn-in testing. The link to our public camera is:

      http://dropc.am/p/0VNfyS

    31. Steve Sutherland
      Superbacker
      on June 11, 2014

      Still waiting on Canadian shipping of the Early Adopter :(

    32. martin kopplow on May 22, 2014

      Since it was mentioned here, I just searched Google Groups for a DeltaMaker Group, but couldn't find it. (That said, I am NOT a newbie, I run more than one Google groups myself!) There are a lot of comments on Delta Maker to be found on other Google groups, but there is no DeltaMaker Group to be identified as such. I mean one would expect it to be named something like "DeltaMaker" or the like, wouldn't one?

      Please post the group's URL here and include it in an update for everyone to see and click, it can't be that hard and would prevent some frustration on the backer's side.

    33. SaltyBrains
      Superbacker
      on May 20, 2014

      me too, still waiting for international :(

    34. Missing avatar

      greg
      Superbacker
      on May 19, 2014

      Any updates for international shipping? It's been almost a month since the last comment here by DeltaMaker.... Are you even shipping printers? What's happening?

    35. Josh Mccall on May 12, 2014

      Just printed my first object (the pre-loaded calibration block) and am really happy with the DeltaMaker! The UPS tracking was a great surprise, with an email confirmation of package sent and package delivered. This machine is very easy to use. The octoprint interface is very nice as well. This thing is so tall and awesome looking, and starting it up and hearing it run was just unreal! Like a mini terminator. I would compare the volume level to an inkjet printer on steroids. Not super loud but sounds just like an inkjet.

    36. Missing avatar

      Jonathan on May 10, 2014

      For those keeping score at home, my credit card dispute was finalized recently, and the money is officially mine now.

      Given how things are going, I think this was for the best.

    37. Josh Mccall on April 28, 2014

      I would like an invite to the google group as well. I can't seem to find it when I search on my own, I am not familiar with google other than its search engine.

    38. Missing avatar

      Scott Armitage on April 28, 2014

      Come on, guys. It's simple question:
      How many printers have you shipped to date?

    39. DeltaMaker Creator on April 24, 2014

      @Eric, @Mark, we've made a lot of progress in the past couple of weeks -- I'll be posting another Kickstarter Update soon. To receive more frequent updates, we are encouraging our backers to migrate over to our DeltaMaker Google Group -- a community of DeltaMaker users is beginning to form over there. I'll make sure that everyone has been invited to the group.

    40. Missing avatar

      Eric Bowman on April 24, 2014

      I wish you all the best and hope the
      DM guys come through on all their promises. I decided to take a loss and sell mine on eBay because of the lack of communication. Not willing to chance it with DM for such an investment, especially if I would have ever need tech support or repairs. I decided to go with SeeMeCNC and their Rostock Max V2 kit. What sold me was that I called them and spoke to the founder on the second ring. Hopefully the DM guys wake up and start communicating.

    41. Missing avatar

      Mark K on April 24, 2014

      update???

      the last one was almost 2 months ago...

    42. Missing avatar

      Scott Armitage on April 19, 2014

      DM: Please give us a straight answer to this question:
      How many printers have you shipped to date?

    43. SaltyBrains
      Superbacker
      on April 18, 2014

      any news regarding shipping dates ?

      "Your DeltaMaker will be produced with the earliest run of production "

      how are others receiving theirs if i am supposed to be in the EARLIEST run ? :(

    44. Missing avatar

      MARCO VERGARA
      Superbacker
      on April 17, 2014

      What about USA backers are you full fill the orders? Because still waiting mine!!!!

    45. DeltaMaker Creator on April 14, 2014

      @Matt, thanks for posting a DeltaMaker unboxing. Your blog looks good...
      @Paul, we had a shipping damage issue last month which caused us to postpone international shipments while we investigated it. We hope to begin our international shipments this week, starting with our Canadian backers. Based on what we learn by the Canadian shipments, we will be better able to forecast when overseas shipments will begin.
      @Jason, our goal is for your DeltaMaker to work great, right out of the box, but I appreciate your willingness to make adjustments/fixes, if necessary. We will be posting instructions for basic repairs, such as unclogging the nozzle, etc. Regarding our shipping estimates, I will take a stab and include it in our next update.

    46. Missing avatar

      Jason Doege on April 9, 2014

      @Matt Gorton, I can't wait until I can say the same thing. Well, I can wait, I have been waiting, but you get what I mean.

      @Bob, could you, at this point and knowing what you know now, take a stab at estimating when each pledge level reward will be fulfilled?

      I can't speak for others, but I for one am far more likely to do guided work to adjust/fix the printer rather than send it back for you to do it, if that affects when you could send me one.

    47. Paul Brown on April 7, 2014

      I am an international backer, are there any updates on the sipping dates and pricing?

    48. Matt Gorton on April 2, 2014

      Hey fellow backers, I received my printer and put up a blog post with the unboxing. It is a very nice machine. http://www.printedsolid.com/deltamaker/

Show older comments