Share this project

Done

Share this project

Done
Downloadable STL files for sci-fi/industrial walls, doors and floors.
Downloadable STL files for sci-fi/industrial walls, doors and floors.
391 backers pledged NZ$ 5,869 to help bring this project to life.

About

Corridors of Fate: Sci-fi modular terrain

NZ$ 5,869

391

The Corridors of Fate contain modular walls, doors and floors that enable the creation of your own sci-fi/industrial terrain, be it the interior of a massive space-station or the industrial hub of a worn down factory, or anywhere in-between.

Files have been scaled for 28mm miniatures but, as with all 3d printable files, you have the ability to scale them up or down to suit your gaming needs.

Pledging for this is easy. There is only one pledge with rewards to choose from and any extras that are opened up through the course of the project will be included in that pledge.

The initial reward consists of 55 different modular pieces allowing a multitude of wall, floor and door configurations.

This consists of:

  • Wall 01 plus eight variations

  • Wall 02 plus six variations

  • Doorway A (works with Wall 01) and Doorway B (works with Wall 02), both doors open and close.
  • 2 Floor-plate designs with a variety of shapes
  • 2 x computer console designs

The models have been designed with a clip system to hold the walls and doors in place so accidental bumps won't be a problem.

  • Clips for both walls and doorways

There are two pledge levels available for this campaign.

This pledge level will keep you up to date with the campaign.  No rewards are available at this level. Roughly US$0.67, £0.54, €0.60.

This pledge level will get you all of the Corridors of Fate files plus any applicable stretch goals. This is over 50 files plus any extras. Roughly US$10, £8, €9.


A few of these stretch goals are currently works in progress. While I will endeavour to complete them all before the finish of the campaign (and I anticipate doing so), some of them may not be ready in time. If that is the case, the main reward will be sent out as soon as possible and the unfinished stretch goals will be added to the Wargame Vault page when they are completed and ready for you. I would rather get these right and have them test printed to ensure they work before getting them out to you.  


  • NZ $250

At NZ $250 some Objective Markers will be unlocked, useful for marking areas of importance. Numbered 1 to 6.



  • NZ $500

At NZ $500 a Hazardous Chemicals Container will be unlocked. Useful as scatter terrain.


  • NZ $750

At NZ $750 Circular Model Bases will become unlocked.  They feature the tile patterns from the two Floor-Plates. There are designs for 25mm and 32 mm bases.


  • NZ $1000

At NZ $1000 a new Narrow Door and doorway will be unlocked. Narrower in size than the previous doorways, it will be great for designing tighter more confined corridors.



  • NZ $1500

At NZ $1500 a Battle Damaged version of Wall 01 will be unlocked with a large blast hole allowing you to see straight through to the other side.

  • NZ $2000

At NZ $2000 a Sci-Fi Reactor will be unlocked. Ideal as an object to defend, attack or escape from (if it's going to explode for example!).

  • NZ $3500

At NZ $3500 a floorplate Hatchway will be unlocked. Great for getting in and out of sewers and other subterranean locations.


 All files have been printed to make sure they work and are error free. They were created in 3ds Max and Zbrush  and have been run through a repair tool.

Physical Prints
Physical Prints

I used a very simple paint scheme consisting of a black basecoat followed by a  drybrush of grey and then white.

Assembled example, model figures are for scale purposes only.
Assembled example, model figures are for scale purposes only.
Printed and painted Objective Markers
Printed and painted Objective Markers
Printed  and painted Bases
Printed and painted Bases
Printed and painted Hazardous Chemical Containers
Printed and painted Hazardous Chemical Containers
Printed and painted Doorway Narrow and Door
Printed and painted Doorway Narrow and Door
Printed and painted Wall 01 Blasthole
Printed and painted Wall 01 Blasthole
Printed Reactor, only the floorplate is painted
Printed Reactor, only the floorplate is painted

Assembly Overview

 project video thumbnail
Replay with sound
Play with
sound
Assembly Guide
Assembly Guide

Pro tip - Assembling the Wall 02 sections. The printed clips have a nice snug fit and push in and out of the Wall 02 recesses easily. If you paint the sides of the clips and the recesses of the wall pieces the clips will still fit but will be much tighter, making them more difficult to remove if you want to re-arrange your walls.

Fulfillment of the Corridors of Fate will be completed through WargameVault. Each backer will receive copies via their account. Fulfillment will begin as soon as possible. This should hopefully be within 2 weeks of the project funding. A survey will be sent out shortly after the project has funded to gather email addresses associated with WargameVault accounts. Please note, this is the only way to gain these files. You will find this advantageous as you will then have the files in your library so you can access them as often as you would like.  

Keep up to date with this and future projects at www.facebook.com/foxcraftcreations




  • Thanks

Thanks to Kieran Billings for all the tips and advice. https://www.facebook.com/deviousgames/ 

Risks and challenges

This is my 1st individual campaign with Kickstarter. However I've been part of several similar STL file campaigns run by Devious Games (https://www.facebook.com/deviousgames/) and am confident this will run as smoothly.

If this is highly successful some of the stretch goals may take longer to be received by backers but the core files will be sent out as soon as possible and the stretch goal files being sent out as they are completed (after design, printing and testing).
Files are constantly backed up in the cloud so that they are kept safe so there is no danger of file loss.

Learn about accountability on Kickstarter
Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge NZ$ 1 or more About $0.64

    What's happening here?

    Pledging one dollar will keep you up to date with what's going on and make you feel like a great person.

    Less
    Estimated delivery
    3 backers
    NZ$

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge NZ$ 15 or more About $10

    The Corridors of Fate

    STL files for the Corridors of Fate.

    Includes all of the STL files and any stretch goals.

    Less
    Estimated delivery
    385 backers
    NZ$

    By pledging you agree to Kickstarter's Terms of Use, Privacy Policy, and Cookie Policy.

    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (30 days)