Basic filemanager - introduction
The Filemanager has already been included in our lastest Doodle3D patch. This post is to briefly describe where you can use it and what it’ll allow you to... Read more
The next Doodle3D software-update is ready!
Over the past year the Doodle3D WiFi-Box has been shipped to hundreds of homes, schools and educational institutions across the globe giving children and students the opportunity to use a... Read more
WordArt, Shapes, 2D-transformations and more!
Dear Doodle3D backers,
The last one and a half month we have been working on some great improvements in the software running on the Doodle3D WiFi Box including the long-awaited... Read more
New software, new experiments and try out our API!
Time for a development update! The past few weeks have been filled with progress on several fronts. New additions and bug fixes to the software as well as... Read more
Are we there yet?
We'd like to give you an update on what we've been up to the last two weeks and our plans for the rest of the year.
We've got... Read more
First shipment succesfully picked up
The end of last week was marked by an unexpected setback with finalizing the product packaging. A full set of product sleeves received by us from the printer... Read more
And we're on the home stretch... well at least as far as the first version concerns. We've done everything, asked everyone and used every resource necessary to get your long... Read more
The final countdown...
Thanks for all the patience you've shown us sofar. It's been great working on Doodle3D without anyone pushing too hard (we've been pushing ourselves more then enough!). We... Read more
This last week has been one of 'much progress'. We had a supermegawork session last wednesday and sat together, wearing our Doodle3D t-shirts, working on all kinds of... Read more
Running towards the end...
This week we’ve got a couple of things we would like to share with you Backers. First of all we would like all of you that backed us for a... Read more
Doodle3D and Ultimaker 2
Dear Doodle3D backers,
Last week we’ve been very busy working on a couple of boxes to send of with Ultimaker to attend a number of venues in both the US... Read more
Some bad and a lot of good news...
Dear Doodle3D backers,
This update contains some bad and a lot of good news from the Doodle3D front line.
To start of with the bad news.
We have to inform... Read more
Testing and Settings
This week we would like to inform you about the progress we made so far on the issue of settings. We've been building the settingspage in Doodle3D which... Read more
Product update and beta's shipped
Last week we ran into & tackled a potentially critical hardware issue with the Doodle3D WiFi-Box. We found out that sometimes the WiFi signal disrupted the USB communication... Read more
Important: call for local testers, technical improvements, product packaging
At OHM2013 we have met great people and have received very useful feedback on Doodle3D. Today we have a special request of our backers. Especially backers within travel... Read more
Doodle3D @ OHM2013 hacker/maker camp
Currently we (Rick, Peter, Wouter and Harma) are at the OHM2013 international hacker conference (https://ohm2013.org) surrounded by around 3000 very skilled programmers, hackers, makers, geeks, creative technologists, scientists... Read more
TP -link boxes arrived!!
This week we received a shipment of around 1000 Doodle3D boxes. The shipment weighed over 200kg and takes a prominent place in our warehouse.
We’re preparing the round... Read more
We are starting to really get up to speed in the process. The Ultimaker already did his first wireless prints with Doodle3D WIFI box!! In the next two... Read more
Going on different platforms
Hi everyone, A few weeks back we asked you to fill out a questionaire about which devices and platforms you use. We are so happy that almost all of you... Read more
Small technical update
One of the harder choices is how and where to do the scan and trace processing. My initial experiment was in an native app using openCV's contour finding,... Read more
Starting the development
This week the Development Team had their kick-off. All the demands and wishes have been transferred into five milestones. And there has been made a timetable for the... Read more
Our apologies for missing our update last week, but we have some new progress to share on our project!
At the end of this week we will be... Read more
The week after
Exactly one week ago we finished our Kickstarter campaign. It has been a busy time since then with lots of press coverage and interviews. We're very happy to... Read more
Thanks everybody for making our Kickstarter such a great success! We're very happy and will work very hard to meet our deadlines. We will keep you informed of all the... Read more
30 minutes left & some great news
With less than 30 minutes left before the end of our Kickstarter campaign we're happy to announce two very nice features which we will add to the Doodle3D... Read more
Movie of our Scan & Trace experiments
Thank you so much for staying with us and for all your support and useful comments! We've been working very hard to research a lot the different printer... Read more
Some cool new stretchgoals for Doodle3D!
Thank you so much for bringing us at the 60k goal on Kickstarter! We're really happy to announce some new plans we have in mind! Check this out:... Read more
1st Stretch Goal: scan & trace with Doodle3D
Great news! The funding on Kickstarter for the Doodle3D WiFi Box goes really well. Thanks to all backers we reached our initial goal of $50.000 after just one... Read more
3D Printers supported so far by Doodle3D WiFi Box
Thank you very much for getting us at 85% of our goal already in less than a week! We are getting there but please keep spreading the news.... Read more
Announcing new feature for Doodle3D WiFi Box
Thanks to you our Kickstarter campaign for the Doodle3D WiFi Box is becoming a great success. After one day we reached 50% of our goal already!
As of... Read more