Share this project

Done

Share this project

Done
Research! Explore! Colonize! Survive! Oh yeah, and save the planet if it is profitable.  A Hex tile space exploration game!
Research! Explore! Colonize! Survive! Oh yeah, and save the planet if it is profitable.  A Hex tile space exploration game!
Research! Explore! Colonize! Survive! Oh yeah, and save the planet if it is profitable. A Hex tile space exploration game!
977 backers pledged $75,098 to help bring this project to life.

Use this space to cheer the creator along, and talk to your fellow backers.

Have a question?

Only backers can post comments. Log In
    1. Brad EZ Hay on January 22, 2014

      Still waiting on new manual, connectors and mat in Alberta,Canada. Which is a shame. I had a ton of friends who were interested in the Gripmat Kickstarter, but were waiting to see how mine turned out.

    2. Break From Reality Games 5-time creator on January 19, 2014

      @Michael - I am waiting on word from my fulfillment partner that these have all shipped. I was told on this past Thursday that they were expecting to start shipping them Friday, and would be done shipping them on Tuesday. I will do an update if I hear any change in this - and especially if I find out they have all shipped!

    3. Michael J. Klein on January 19, 2014

      Any update? Still waiting on the connectors, manual and grip mat in VA. Thanks.

    4. Break From Reality Games 5-time creator on January 5, 2014

      @Bob - The GripMats were all completed on Friday - finally. We have gone though scaling up pains, and getting the mats to come out right as we went from 5-10 mats a day, to 50 a day, to our current capacity took more time than anticipated. This being said our fulfillment folks have instruction manuals, and connectors and GripMats! So happy day - this week we should get them all out. Some of you may receive before the end of campaign... but most of you will not. I will do a post on this as well.

    5. Missing avatar

      Bob Govia on January 5, 2014

      Hi Team. Your other Gripmat Kickstarter ends in 70 hours - it seems to be doing quite well (congrats)! Are ours on the way or is there tracking info available? Or are we gonna miss our chance to see them ahead of time?

    6. Derrick Tindal on December 31, 2013

      Did you send out the rulebook and connectors to backers that did not order a playmat?

    7. Break From Reality Games 5-time creator on December 16, 2013

      @Michael - I will message you on this to make sure your address is correct.

    8. Svenn on December 16, 2013

      Still no new connectors/rulebook. Any word on that? It's been about 3 weeks now.

    9. Break From Reality Games 5-time creator on November 27, 2013

      We are doing the lion's share of mailing next week. We received the connectors, and the rule books. We are waiting on mats to send out to those backers. Otherwise - you should see them immanently.

    10. Svenn on November 27, 2013

      When can we expect the new rulebooks/connectors to start arriving?

    11. Break From Reality Games 5-time creator on November 21, 2013

      @Jeff - send me an email and I will make sure we get you one!
      @Brad - please send me an email with a current address
      info@bfrgames.com

    12. Brad EZ Hay on November 21, 2013

      So, do I need to request a new manual or will I get one automatically as a backer of the project?

    13. Jeff the Voice Actor on November 4, 2013

      I'm not sure if you have my most recent address for the mailing of the new insrtruction manual. How can I check to make sure what you have on file??

    14. Break From Reality Games 5-time creator on November 1, 2013

      @Brian - I just messaged you. This was shipped to you, we were not aware it had not been received. Please message me back so we can resolve this for you. I am sorry that you are having a bad experience.

    15. Break From Reality Games 5-time creator on November 1, 2013

      @Sean - I know ... replacement components are taking forever. The replacement connectors should be in hand during the month of November. Panda is making these for us, and informed us it would be the first week of November for completion. I have emailed my contact for an update on these. The instruction manuals are printed, and finally the mats are about to be printed as well.

    16. Break From Reality Games 5-time creator on November 1, 2013

      @Dan - Mats will be printing imminently. Our most recent sample came out a bit blurred when we took it to the 100% size (24" x 32"). This was not acceptable. I am supposed to be receiving final pre-production samples this week. We plan on doing a full update at this time. (hopefully this weekend)

    17. Missing avatar

      Brian Burrow on November 1, 2013

      very frustrated with this game.....they never doing what they say... wish i never gave them my money.... worst game buying experience ever... they sent me a mail telling me they send me replacement board and spinner out back in april... tolk me they send it out that week....its now nov.......WTF ???????????????????????????????
      getting pissed......

    18. Sean K King on October 21, 2013

      Tick Tock Tick Tock

    19. Dan Keller
      Superbacker
      on October 12, 2013

      Any more word on the mats?

    20. Break From Reality Games 5-time creator on September 30, 2013

      @Mark / Brad / Bob- So we are only awaiting the connectors at this point they are going into production very soon. Once I receive them we will be mailing out manuals, and connectors. As for the mats - we continue to be very close on this. I have daily conversations with the manufacturer, and they are still waiting on the proper 24" width material. My most recent update (about 1 hour ago) is that they will have the material by Friday.

    21. Brad EZ Hay on September 30, 2013

      Just touching base to see how things are coming and when us Canadian backers can expect the playmats and revised rulebooks.

    22. Mark Bisignano on September 22, 2013

      Is there an update on the delivery of the playmat and connectors? Sounds like the updated rulebook is awaiting the connectors. Can't wait to get the playmat!!

    23. Missing avatar

      Bob Govia on September 9, 2013

      Hey team - looking forward to the connectors, manual, and play mat soon! My address has changed - how shall I inform you?

    24. Break From Reality Games 5-time creator on August 21, 2013

      @Stephen - they are printed, we are getting ready to ship. We have been delaying in anticipation of the connectors. See comment below. We are working still to get corrected connectors.

    25. Break From Reality Games 5-time creator on August 20, 2013

      @Michael - the connectors we had sourced ended up again being the incorrect size (ever so slightly too large, and this was after providing the manufacture both dashboard samples and connectors). We are still working to get these corrected. They are NOT a necessary component to enjoy the game. We have suggested an alternative by simply using only the bottom connector.

    26. stephen gordon on August 20, 2013

      Any news on the manual?

    27. Svenn on August 11, 2013

      Any update on the connectors? The update we got this weekend didn't mention.

    28. Break From Reality Games 5-time creator on August 1, 2013

      @Walter we have the manuals, and have only been waiting on our plastic replacement connectors. We should have those VERY soon. We will have a post on that probably the weekend of 8/9.

    29. Sylvia L Armitstead on August 1, 2013

      @Herbert Thank you for the inquiry. I have personally been in contact with the folks who are doing our mats. They have a beautiful machine made for the creation of the mats and now we are down to test run after test run after test run to make sure everything is correct. Currently the art has been sent in and approved and they are working on making sure the ink saturation is going deep enough into the material.

    30. Walter H. Hunt on August 1, 2013

      Were we to receive reprinted rule books? If so, I never received one.

      I assume that the expansion is not even under consideration at this time.

    31. Random Gamer on July 27, 2013

      any status update on the mats?

    32. Sarah Miller on June 20, 2013

      Oops! Disregard that comment. I found the original and the response. (wish I could delete!).

    33. Sarah Miller on June 20, 2013

      I never got my poster. I put a comment up about this on one of the updates, but now I can't find it to see if there was ever a reply. Is there any way I can get a poster still?

    34. Break From Reality Games 5-time creator on June 17, 2013

      An update will be posted shortly as to the status of mats. I am happy to say there is good news.

    35. Sean K King on June 17, 2013

      Ditto!? Any new news on the mats?

    36. Some Guy on June 16, 2013

      So are the mats coming at some point?

    37. Break From Reality Games 5-time creator on June 3, 2013

      Oh, and we will be at Origins next week at booth #508. Even if we don't have the final version, if you happen to stop by, we'll have a sample that you can feel for yourselves if you'd like to stop by!

    38. Break From Reality Games 5-time creator on June 3, 2013

      Mini comment style update! We have had a little headway with mats. The manufacturer we are using has yet to send us a sample of the final product. We did receive 5 samples last week...but in the wrong size and with the wrong art. We are still working on getting them done to our specs. Believe me, we want our mats just as much as you guys! When we have the final samples, we'll be so excited about it that we won't be able to stop ourselves but to take several photos and put out an official project update as soon as we can.

    39. Missing avatar

      Bob Govia on May 31, 2013

      Hi team - would love an update on play mats etc. I'm sure some of us are waiting patiently as our other replacements are on-hold as well so they can ship together.

    40. Break From Reality Games 5-time creator on May 8, 2013

      Hi All!

      Just wanted to give a quick comment that the new manuals have been sent to print! We'll have more news on mats and stuff soon!

      - Alex

    41. Missing avatar

      Brian Burrow on April 22, 2013

      i did respond to your message but never heard anything back

    42. Break From Reality Games 5-time creator on April 10, 2013

      @Brian - I just replied to your 1/15 message. I apologize this was missed. We can get you replacement components, let us know what you need.

    43. Missing avatar

      Brian Burrow on April 10, 2013

      I have email you guys and never heard back. what about the wheels not fitting together and the dials that are misprinted. I have one that doesnt have the hand and about half that are misprinted and off center. I have to say that lack on communication is disappointing. makes me wish i never supported this project, you really make me feel like it dont care to you. I sent a few emails 3 or 4 months ago never heard anything.

    44. Break From Reality Games 5-time creator on March 6, 2013

      @Walter - this is going to take more time to get to - both in development, and as well as business needs. We plan to have this ready to go near the end of 2013.

    45. Walter H. Hunt on March 6, 2013

      Whatever happened to the Xenopolitics expansion?

    46. Sean K King on March 5, 2013

      A "Break from Reality". With the communication it's appropriate. Sorry to be up front but even a weekly no new news is better than silence.

    47. Sean K King on February 23, 2013

      Ohh I see it on comments further down.

      Probably something that should be mentioned in an update. It's about the time people might be going. "Oh yea..." And asking questions.

    48. Sean K King on February 23, 2013

      Any update on the mat?

      How about Xeno-Politics?

      Or the replacement part for Disaster Looms?

    49. Break From Reality Games 5-time creator on February 2, 2013

      @Amanada - I will get you one! I did not realize that you had not received it.

      @Sean - We are being delayed as material is on back order for our print run. I will post an update just as soon as the material has arrived, a final sample printed, and is in my hands. I am very sorry for the continued delay on this product.

Show older comments