Use this space to cheer the creator along, and talk to your fellow backers.
Have a question?
I'm not sure if you have my most recent address for the mailing of the new insrtruction manual. How can I check to make sure what you have on file??
@Brian - I just messaged you. This was shipped to you, we were not aware it had not been received. Please message me back so we can resolve this for you. I am sorry that you are having a bad experience.
@Sean - I know ... replacement components are taking forever. The replacement connectors should be in hand during the month of November. Panda is making these for us, and informed us it would be the first week of November for completion. I have emailed my contact for an update on these. The instruction manuals are printed, and finally the mats are about to be printed as well.
@Dan - Mats will be printing imminently. Our most recent sample came out a bit blurred when we took it to the 100% size (24" x 32"). This was not acceptable. I am supposed to be receiving final pre-production samples this week. We plan on doing a full update at this time. (hopefully this weekend)
very frustrated with this game.....they never doing what they say... wish i never gave them my money.... worst game buying experience ever... they sent me a mail telling me they send me replacement board and spinner out back in april... tolk me they send it out that week....its now nov.......WTF ???????????????????????????????
Tick Tock Tick Tock
Any more word on the mats?
@Mark / Brad / Bob- So we are only awaiting the connectors at this point they are going into production very soon. Once I receive them we will be mailing out manuals, and connectors. As for the mats - we continue to be very close on this. I have daily conversations with the manufacturer, and they are still waiting on the proper 24" width material. My most recent update (about 1 hour ago) is that they will have the material by Friday.
Just touching base to see how things are coming and when us Canadian backers can expect the playmats and revised rulebooks.
Is there an update on the delivery of the playmat and connectors? Sounds like the updated rulebook is awaiting the connectors. Can't wait to get the playmat!!
Hey team - looking forward to the connectors, manual, and play mat soon! My address has changed - how shall I inform you?
@Stephen - they are printed, we are getting ready to ship. We have been delaying in anticipation of the connectors. See comment below. We are working still to get corrected connectors.
@Michael - the connectors we had sourced ended up again being the incorrect size (ever so slightly too large, and this was after providing the manufacture both dashboard samples and connectors). We are still working to get these corrected. They are NOT a necessary component to enjoy the game. We have suggested an alternative by simply using only the bottom connector.
Any news on the manual?
Any update on the connectors? The update we got this weekend didn't mention.
@Walter we have the manuals, and have only been waiting on our plastic replacement connectors. We should have those VERY soon. We will have a post on that probably the weekend of 8/9.
@Herbert Thank you for the inquiry. I have personally been in contact with the folks who are doing our mats. They have a beautiful machine made for the creation of the mats and now we are down to test run after test run after test run to make sure everything is correct. Currently the art has been sent in and approved and they are working on making sure the ink saturation is going deep enough into the material.
Were we to receive reprinted rule books? If so, I never received one.
I assume that the expansion is not even under consideration at this time.
any status update on the mats?
Oops! Disregard that comment. I found the original and the response. (wish I could delete!).
I never got my poster. I put a comment up about this on one of the updates, but now I can't find it to see if there was ever a reply. Is there any way I can get a poster still?
An update will be posted shortly as to the status of mats. I am happy to say there is good news.
Ditto!? Any new news on the mats?
So are the mats coming at some point?
Oh, and we will be at Origins next week at booth #508. Even if we don't have the final version, if you happen to stop by, we'll have a sample that you can feel for yourselves if you'd like to stop by!
Mini comment style update! We have had a little headway with mats. The manufacturer we are using has yet to send us a sample of the final product. We did receive 5 samples last week...but in the wrong size and with the wrong art. We are still working on getting them done to our specs. Believe me, we want our mats just as much as you guys! When we have the final samples, we'll be so excited about it that we won't be able to stop ourselves but to take several photos and put out an official project update as soon as we can.
Hi team - would love an update on play mats etc. I'm sure some of us are waiting patiently as our other replacements are on-hold as well so they can ship together.
Just wanted to give a quick comment that the new manuals have been sent to print! We'll have more news on mats and stuff soon!
i did respond to your message but never heard anything back
@Brian - I just replied to your 1/15 message. I apologize this was missed. We can get you replacement components, let us know what you need.
I have email you guys and never heard back. what about the wheels not fitting together and the dials that are misprinted. I have one that doesnt have the hand and about half that are misprinted and off center. I have to say that lack on communication is disappointing. makes me wish i never supported this project, you really make me feel like it dont care to you. I sent a few emails 3 or 4 months ago never heard anything.
@Walter - this is going to take more time to get to - both in development, and as well as business needs. We plan to have this ready to go near the end of 2013.
Whatever happened to the Xenopolitics expansion?
A "Break from Reality". With the communication it's appropriate. Sorry to be up front but even a weekly no new news is better than silence.
Ohh I see it on comments further down.
Probably something that should be mentioned in an update. It's about the time people might be going. "Oh yea..." And asking questions.
Any update on the mat?
How about Xeno-Politics?
Or the replacement part for Disaster Looms?
@Amanada - I will get you one! I did not realize that you had not received it.
@Sean - We are being delayed as material is on back order for our print run. I will post an update just as soon as the material has arrived, a final sample printed, and is in my hands. I am very sorry for the continued delay on this product.
Another month has gone by, any ETA on the mats yet? :)
I'm sad that I haven't gotten my poster yet. :(
@Bob - the Damage Report mats are queued behind Disaster Looms! mats. The delay has been nailing down the new material / color contrast / and long term durability of the product. We have all that figured out now, so future mats will not suffer this long delay. Xeno is going to be delayed. We were over ambitious on this expansion, and when we would be getting to it. We are planning on including printed manuals, and corrected connectors / tech cards when we ship this. We will not be producing Xeno Politics until after the completion of our next project. Thus it will be late summer before this will be ready to come out. We will be offering backers previews as work gets into swing and we have more than sketches, and concepts.
I know a lot of what you hear now is from the squeaky-wheels, so for everyone's benefit I want to be clear that I really enjoy this game and love the idea. My friends and family have had lots fun playing it as well! As always, looking forward to a play mat and also looking forward to the updated manual.
I have a few questions for you guys while we're at it:
1) Regarding play mats: Have you had similar problems with the play mats for Damage Report? Or are they queued behind these? I'm interested in getting one pending how the Disaster Looms ones turn out, is it possible to pre-order at the KS price on those ($25 a la carte from the DR KS?) Is the art for this somewhere?
2) My next question is around the stretch goal Xeno-Politics expandalone due out in Q1 (i.e. shipping in 10 weeks or so) - is this on track? Can we get any preview of what is happening there? For backers at or above the level that includes Xeno, can we expect our other DL! materials to be updated/refreshed as well and included with it? I mean specifically the cards (material, corners) and rules (which will have been significantly overhauled.)
@Brasky - We hear you loud and clear! We have the re-write of the manual complete. We are working on getting new diagrams made, and should have this complete in the next couple of weeks. I had hoped to have this complete prior to Christmas, but this did not happen. We will be doing a post in the next day with the rules without art, or diagrams - just the PDF re-write. I appreciate your passion for what we feel is a great game.
Sorry, my previous post comes off a little accusatory and I can't edit it.
I'm just really wanting to get this game in my groups rotation, but without the revised rules I fear it will not happen.
Anyway, I really like everything else I've seen of the game, the components are awesome and feel like they will hold up for years, and I love the setting for the game as well.
As many people have asked, I am curious about when we will get an actual working manual for this game. It is basically unplayable without it.
I am super excited to try this game out, but I am definitely frustrated that there has been no response to this oft asked question.
The silence is deafening. I truly hope this is just an over-site soon to be remedied, and not a foreshadowing of customer support after you have already gotten our money.
Thanks for the update! ;-)
Any ETA on the revised manual for Disaster Looms?
Thank you for the update!
@Sean - we had another attempt at production last week. We have an image of the product printed on sheet! It looks ... ok. The manufacturer was adjusting color and planning on doing another sample run at the end of last week. I am hoping for an up date early this week. I have left them messages and email with that expectation. :) When I have something solid to show, I will get it out there.
Tomorrow will be the second Monday for the update. Any new news?